Solved

Hi, I’m looking for a way to check price freeze automatically on customer order lines in Apps 10. Is there a way to set the default value as selected in a base profile or somewhere else? Worst case scenario, I guess we could create some kind of event to check the box when the order is released. Any help is appreciated.Mike  

Is ‘Import Lease Opening Balances’ option available in cloud? I find it in apps 10, but appears missing in cloud. Appreciate assistance.

Hi Guynow we are using aurena agent to print report ,but which has the watermark in it.how to disable it ,thanks very much 

Dear Friends, We have created a sample inbound request web service (Synchronous) to test with Boomi. IFS Version = 8Request = String like “My Request”Response = String like “Your Response” While testing in Boomi or Postman, we are not getting the above designed response but getting the default response i.e. “Message 2.2365227E7 is posted to IN1”. Also we have tried the suggestions of this thread “Tip: Using POSTMAN to test IFS Webservices”Thanks in advance for your solution and suggestions. Regards,Sanjay

Question was raised by one of the customers regarding the following. Customer has ordered 6 of a part for a project.Accidently they receive 12 into project inventory.The mistaken 6 received were counted out and not done as a cancelled receipt.The project still think there are 6 more to ship or deal with yet they aren’t there. How can we close this activity and remove it from the Unfinished Activity work. 

Hi all,For customer masterdata it's possible to fill in an expire date on the order tab. When entering a Customer Order you will get an error message that the customer is expired. However when entering a Sales Quotation for the same customer no error message appears .Is there a possibility for a expire date for the quotation as well?thx !Regards,Martin Broekman 

Hello We are using Employee File → Employment → Free Fields to define some employment details of the employee.We noticed that after we use the “Terminate Employment” system automatically changes “Valid To” date for all the “Free Fields” to the date that we initially selected as “Notification Date” and “Employment End Date” in the assistant. We tried removing (disabling) the “Free Fields Valid To Date” from the “HR Assistant Configuration”, but still the “Valid To” dates to all “Free Fields” are being updated. Is it possible to turn of the processing of the “Free Fields” when “Terminate Employment” is used?   

Greetings, IFS Community!It has been difficult for me to display a Crystal Report that I built using "command" => See Fig 1Could a crystal report be created using command and used in FS?  The following article caught my attention. However, all examples are based on views and AIL.When a Crystal report is created using Command . How could I add the alias? When I create a crystal report using Command, do I need to apply an alias?Is it possible to apply the alias if the answer is yes? Fig 1. The report runs correctly in Crystal report designer. However, I am prompted for authentication when I try to run it from IFS.    The screenshot below shows how the prompt looks when I run the report from the Crystal report designer when I followed all the rules for IFS_WEB_USER_    Thanks,JL

Hi, On a service order, we would like to have only one PDF report for the SVReport (+ checklist, signature+picure) and for the invoice (paymentsummary).The customer purpose is to have on 1 document the amount of the invoice and all data related to this amount (labor, service, expense, etc..) . His invoice verification is easier. What could be the best way to do that “global report” ?Could we try to modify the payment summary report in order to add data from the SVreport ?Could we try to modify the SVreport in order to add data from the payment summary  ?other way ?Did you already done a report like that for a customer ? Thanks and Regards for your advicesanthony

I need to do a select statement that calls a number of API’s that are not available under the schema that I am logged in under. Basically I have a select that selects from tables and views that I have access to under the login I am using (IFSINFO). But there are some lines that call API’s that are only available under a different login (IFSAPP).If I comment out the lines that call these API’s the select works fine. But if I leave one of them uncommented the select brings back nothing. I have tried logging in as IFSAPP and granting Execute on user IFSINFO to those packages but when I log back in as IFSINFO the select comes back with no rows. It doesn’t give an insufficient privilege error.I am thinking that the API selects from tables/views that IFSINFO does not have the select rights on. Is there a way that execute can be granted to IFSINFO on an API (and at the same time grant privileges' on whatever views or tables that are referenced in that API)?

We want to setup Oracle to replicate to our Test server and Development server and possibly to an offsite backup server. What is needed to setup Oracle Replication? Is anyone currently using database replication software? Thank you,

Hello all, I am attempting to resolve an issue related to MRB cases for a single part. Currently, we have an MRB Inventory Location that material is moved to prior to the creation of an MRB Case. The issue I have is that in multiple instances, the same parts may require two MRB cases for nonconformance is. Below is an example of the process.: 100 parts moved to MRB location (PN 12345)50 of the 100 are related to nonconformance - Feature Size50 of the 100 are related to nonconformance - Surface Contamination Today, I can only create one MRB case for the entire 100. I must then make notes in the case to outline that there are actually two different reasons for containment of the parts. This also lead to labeling confusion as which parts have the specific nonconformance. Ideally, if you could simply create two MRB cases, one for each nonconformance, this would allow for correct labeling and management of the disposition for each group of 50 parts. The only workaround for this that I have

Hello all, Is it possible in IFS (10) to have the Lot Size of a shop order increase in the event that the reported qty from Shop Floor Workbench exceeds the original Lot Size amount? Often times we over run a coil fed job, which will result in the original Lot Size not matching the actual reported qty (Lot Size - 1000, actual completed qty 1230). Any guidance would be greatly appreciated. Thank you!

Hi, We have made some customizations for APPS10 using the IFS Developer Studio, and can deploy these without error to our development environment, using the Developer Studio’s built-in Deploy logic. Now when we would want to deploy a delivery to a test environment, we have tried to follow the following steps of Creating a delivery: https://docs.ifs.com/techdocs/Foundation1/020_installation/030_patching_system/010_preparing_delivery/Everything else seems clear in these instructions, but we don’t understand the following step: Fetch the deploy.ini files for the components in the delivery and include them among the other files. The deploy.ini file should be placed on the top level for each component. From where is this deploy.ini file supposed to be fetched or generated? Or should we be able to manually write such a file for each component that has been customized? 

When I try and export a report from the export module in Alliance is says that it can not find the file or there is no excel registered.  Well Excel is open.  I have tried multiple files and it still doenst work.  Any ideas?  

Hi, we are trying to install IFS Cloud as a remote deployment option. We have 2 servers Ubuntu 20.04 and Windows Server 2019. The Windows server has a oracle database installed with a dump from customer’s APPS8 environment, and all the artifacts downloaded from Lifecycle experience.  When running the main.ps1 script, we are running into some connection errors for the Ubuntu server:If we leave the ManagementServerIP in main_config.json empty, the main.ps1 returns following errors during execution:  Error: Kubernetes cluster unreachable: Get "https://<server_ip>:16443/version?timeout=32s": dial tcp <server_ip>:16443: connectex: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. If we give the Windows Server IP in the main_config.json, the main.ps1 execution finished without error, but afterwards all kubectl commands return the following error (

Hello,I create a view with SQL, based on task table.I declare it in the custom metadata. with all the columns -is it mandatory?Now, I would like to insert data of the view in the task screen with UI designer.I made a relation in the “Child relation editor and “added a screen field from the view” Now, when I open a task i ‘ve got this message :Complete message in attachments.Did i forget a step? Thanks in advance for you help.    

Hello, I have this error message that appears when I create a document using the IFS document wizard:  Where can this come from? Thanks in advance!   

Hi,I am looking for information about the hierarchy between ex. inventory part and supplier for purchase part, which is the top level in regards to data structure.For example, it is possible on the supplier for purchase part, to setup "min order qty", and on the inventory part a "min lot size", this is the same: the minimal that can be purchased?Since the inventory part cannot be blank, and it seems this number is used in the MRP, then when is the number from the supplier for purchase part used?The same for lead time, lead time can be se up on different levels, but which controls in the end the MRP.Looking for info exactly which fields are used in the MRP and which can override each other? BRAnders

Hi Experts, There is a requirement to get the current web client URL to perform LaunchBrowser operation in client script.Var link = “Current URL’?task.task_id=” +taskID; var taskID = getControlValue('task','task_id');if(taskID!='' && taskID!=null){ var link="Current URL?task.task_id="+taskID; launchBrowser(link);}else{ alert(getMessage('Error in Opening Tab','Information'));}Is there a way to achieve this using existing client script functions? Thanks,Hasara

Customer wants to know whether there is a standard report to check current session in APP10? They say that they had specific report for that purpose in App7.5

I have a Control plans that are not active however there are items that are going into QA and requiring inspections. Is there anything else that can cause an item to go into QA upon being received? 

Hi,Is there any way we can achive the below through migration ? I have 2 method calls in method list Method1Method2how can we use the out parameter from Method1 is and use the same in Method2 ? Thanks in AdvanceAmitesh

Hi All, I am looking to setup an alert to notify a member of our planning team when the on hand inventory of a part drops to zero. My thought was to setup an event action, but I believe I would then need to configure multiple event actions for each part. Is there a way to setup the event or another feature in IFS that could be used to notify someone in the event the on hand inventory level is zero? Any help would be greatly appreciated. Thank you.,

Hi there!My client using IFS10. We performed the Year End Process and we faced an issue. Indeed, we got a gap in our result and this gap is exctacly equal to our “simulation voucher”. For reminder, “simulation voucher” are used to get automatic reverse voucher. So then, those voucher have to be part of the result of the year end and I don’t understand why the system exclude those vouchers?Could you please assist?