Solved

Hi IFS community, We would like to add a small message to the tax code so it would appear on the customer invoice which we create via Instant Invoice tab.How is it done? Please see the picture below to see what I am talking about. Thank you in advance. 

Hi All.Does anyone know how to change this sort to MchCode asc, not Mchname?Using Apps10UPD17 MWO Maintenance 10There is no option to change the field.Tried to add another Orderby item but it’s not working.Tks.Br.Lopes

Hi, I am looking for any best solution for below case. ( mapping in IFS)we place PO to supplier A ( 10 m, bar) and asked to delivered to supplier B location.we place PO to supplier B ( supplier B uses the 4m bar , supplied by us from supplier A and deliver the final material)  ( remaining 6, bar will be lying in supplier B place and uses in next PO). how we can track material locations/ remaining qty/paper work - sending material from supplier A to supplier B)Thanks

Hello,We’ve changed some of our parts to be Primary Supplier Transit on their Sales Part Record. We have Customer Orders currently in the Planned state that contain these parts. I had assumed that if I change the Supply Code of these parts on the Customer Order to be Purch Order Trans, that their PO’s would be automatically created when the job was released. I’m finding that this is not the case. Automatic PO creation was working in our TEST environment if I created a new Customer Order with the changed parts on them and then released the Customer Order. The automatic PO creation just doesn’t seem to be working on Customer Orders that were already created before the parts’ Sales Part sourcing option was changed. Anybody have any ideas?

During the Cloud Launch in 2021, Stephen Jeffs-Watts did a presentation of the future plans for FSM in IFS Cloud.https://info.ifs.com/cloud-launch-on-demand-videos.html?_ga=2.18333948.478674707.1616167306-1371162318.1616167306&wchannelid=h0gd1m5rp6&wmediaid=otkpwg9w5d#ValueAs the final stages of development, Depot repair and Reverse logistics was scheduled for Cloud 22R2. What is the present status?  (Se presentation: 3:25 – 7:00)

Hello,Checking if this is correct in our version IFSAPP9.The PO order quantity was reduced manually by the buyer after partial receipt to match the quantity received, but neither the PO header nor the line item closed automatically. Both had to be closed manually by the manager.Is it because of the manual change in the PO qty after the receipt?Normally, for us, when the quantity received is equal to the PO quantity, the PO line and the header closes automatically. Angelo DiSipio

Hi,    I am working on a SQL query related to  view PROJECT_FORECAST_ITEM_COST. When opening the project forecast, there is a SQL column address as “&AO.SUB_PROJECT_API.Get_Description(PROJECT_ID,SUB_PROJECT_ID)”. How do I include this column in my SQL query with PROJECT_FORECAST_ITEM_COST table?I would like to understand how API works in general as well when it comes to SQL queries.  Many thanksHousseiny

Hi All,Can anyone support me on how  to get sum of last month closing balance and current month closing balance to one column in Business Reporter.Thank You 

Hi There,I have created a Purchase requisition authorization rule and routing templates, and for some reason all my routing steps are not being displayed on the requisition or routed as per the steps. I’m at a loss for what I may have missed. What could I be missing that I am not seeing by chance?I have been under the assumption all steps will show especially if I have “Include All Steps and Consider Limits” selected on the auth. Rule general tab. Auth. Rule 1 - Priority 1 <$500k - Maximum amount $500kRouting template linked to auth. Rule 1, using project roles, all with auth. limit of $500kStep 10 Step 20 Step 30 Auth. Rule 2 - Priority 2 >$500k - Min $501k to Maximum amount $10mlRouting Template linked to auth. rule, using auth. groups, all have max auth. limit of $10mlStep 40Step 50 Once the requisition is released only the following steps appear when I need all the steps 10-50 to appear (Screen shot below)Step 30Step 40Step 50  

Hi everyone,  can anyone please tell me how the priority works on a maintenance plan, as you can see in the below image the priority is set to be 3 which is 2 weeks however when observed the planned start date and latest finish date has difference is just a week.   Thanks a lot in advance cheers

Dear Team,Is there any specific window or other way that we can get the list of users connected with a specific profile or who are not connected ? Wants to see the list who are not connected with the base profile or null?Many thanks in advance. Best regards,Kalhari.

Hi, can the issue-ing of the materials be linked to starting the shop order operation in the shop floor workbench? We would like that when the operator hits the start button, all reserved materials are issued so they get into WIP. Without the operator needing to press ‘issue all’ Thank you!

Hi, In Apps 10 we can send a customer order to a collogue using Send to Option in RMB menu options with a message.  But I couldn't find a similar feature in IFS Cloud. Is there any functionality in IFS Cloud which caters to the same requirement?If so, how I can use it? Regards, NayD

Hi All,One of our users getting below error when trying to open the windows in IFS application. Any help on this error? Regards,MalinG

Hello,  Currently we are looking to leverage approval templates to make the ease of adding approvals at various screens within IFS easier. While setting up an Approval Template, I noticed that the Note field is not available. If you manually create a New Approval Routing manually, you have the option to populate the field. My question is when setting up and Approval Template, are you able to use a Note field to create instructions and detail for each approval step in the template? Any guidance would be greatly appreciated. Thank you.  

Hello, I am working on creating the ability to insert a new row in Business Reporter and have it wrote back to IFS.I am given the normal pop up to insert a new row, I enter the information and press ‘OK’ and occasionally the new line will not be created. There is no error message that is given and nothing happens.Insert New Values ScreenAny advice on why this may happen or how to trouble shoot would be appreciated.

Hello my friendsHow can we record our Business Opportunity Lines (make a history) when they (Business Opportunity Lines) connect to Sales Quotation, As you know when we create Sales Quotation from Business Opportunity the Business Opportunity Lines automatically set in Sales Quotation lines and when we change the Sales Quotation lines, again automatically the Business Opportunity Lines has changed, Here how can we make a history from our pre-Business Opportunity Lines? (before make some changes in Sales Quotation lines ), Actually we need our Business Opportunity Lines in every step separately.Wish the best for you guysGood Luck 

When the Gold Support Terms or Global Support Policy are updated, we, the 1st line, must inform our customers with support service contracts of the changes.Global Support Policy has a update date in the document so we can check if it has been updated or not.However, Gold Support Terms has no such date and the only way to find out is to check the difference. To begin with, does IFS change the Gold Support Terms from time to time?If so, I would like to be able to confirrm the date and content of any updates. Best Regards,

Community,May I know how to use below Additional Tab in window Engineering Part Revision? 

Engineering Part Revision used to have a checkbox that would set the part revision to Released on save.I believe it was in a grouping called “On Save”.  It is very handy when all you want to do is Release the revision and not fight the step of going to Active.Did that get removed?Patrick

I have errors in “Distribution and Manufacturing Postings Analysis” linked to the posting control M1: “Value is missing for posting type M1 combined control type PCAG code part B in company 204.”Here is our setup for M1: Here is our setup for any of the 12xx accounts in the M1 control posting: And here is the setup for the 5550 account: Is the M1 posting control set up ok? I was trying to reconcile the fact that some accounts do not need the department and product while one account does need it. We tried with “can” for department and product for all the accounts 12xx in the M1 posting control but it did not help.  Any comments are welcome. 

Environment:IEE, IFSv10 UPD 11 Enabled single sign-on via ADFS securityProblem:Windows security pops up when user tried to connect through SSO (Sign in as current user) as shown below User can log in when they type username and password, however, User gets kicked off sporadically and the system locks them out completely. It unlocks after 5-10 min or more and they are then able to connect only by typing in username and password and not through current user link shown aboveChecks/Tests done:Checked user configuration on both IFS and Active Directory account Requested user to close IFS and all other applications before changing password Confirmed no sessions on FND_CLIENT_LOGON_TAB before requesting user to retry connection, which still failed, but after awhile let the user connect. User was provided a different PC to rule out if it was machine related issueNote: The timeouts ae irregular. User had no issues until a week ago. User says no change occurred from their end. Other users are ok

Hi all, We’re currently integrating into IFS from another web application, by sending across customer orders. We’re using the IFS web service and sending the order requests viahttp://inbounddistributiontransactions.distributiontransactionmanagement.webservices.ifsworld.com/ The request gets handled and we get a successful response back with order information, see example snippet below - it’s not the full response.. <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">   <S:Header>      <WorkContext xmlns="http://oracle.com/weblogic/soap/workarea/">rO0ABXdXABN3ZWJsb2dpYy5hcHAuaWZzYXBwAAAA1gAAACN3ZWJsb2dpYy53b3JrYXJlYS5TdHJpbmdXb3JrQ29udGV4dAATMjAyMS0wNC0yMV8xNC4zMi41NAAA</WorkContext>   </S:Header>   <S:Body>      <ns0:createCustomerOrderResponse xmlns:ns0="http://inbounddistributiontransactions.distributiontransactionmanagement.webservices.ifsworld.com/">         <return>            <receiver>CONNECT</receiver>     

Hello , I created an approval template to apply on customers , but anyone can detach it or delete it .How to prevent this from happening ?  Thank you in advance ,Hanane

Hello, I would like to automatically close a Business Opportunity when it expires (expiration date = today’s date). I wanted to do this via a Workflow, but sadly, you can’t schedule workflows to run daily, they have to be based off of a projection action or event action. I looked at scheduled database tasks, and I found the method Set_Closed for Business Opportunities, but sadly, the scheduled database task I set is not working. I have this set up so far:I added the “Expiration_date” parameter. Whenever this is run, I get this error: “ORA-20115: BusinessOpportunity.The "Business Opportunity" has already been removed by another user.”and no Business Opportunities close. Am I missing something? I’ve worked with some scheduled database tasks before that automatically create pick lists and reserve customer order items, but this is the first time I’ve seen parameters that (I’m assuming) are passed into the API to set the BO as either Won or Lost. The API Explorer documentation for this meth