Solved

Hello,We are about to begin an upgrade project from IFS9 to IFS Cloud. Originally, the project was scheduled to start in January, but it was delayed due to planning on the customer's end. During January, we had already set the upgrade build home to version 23.2.5.With the release of 24R1, we are considering performing a release update on the lifecycle portal and recreating a new build home for the upgrade from IFS9. However, we are concerned about whether this update will impact the upgrade scripts that are currently set in the 23.2.5 build home.Has anyone encountered a similar situation, and could you provide advice on the best steps forward?Thank you,Hardik

Hi,Has anyone ever come across an issue with the Active Directory Integration where the sync process continuously errors with the below message:“ORA-20105: OracleAccount. REUSED_PASSWORD_ERR. The password can not be reused.”Each time the sync runs, it creates/sync just one account but does not grant the end-user role. Instead, the sync process just ends with the above error. If we run it again, it creates a different new account but with the same issue.We have the option ticked to set the password to be the same as the username. It is throwing the error, both when it tries to create a new account, as well as when it is trying to synchronise an existing account.

Hi, I have setting on the ‘invoice’ the currency = ‘PLN’ for supplier 100045 : but when I add the charge line on the other supplier (ID=102679), but with invoicing supplier = 100045  I still don’t have correct currency.It should be ‘PLN’, but is ‘USD’ ( like base supplier = 102679).   How can I change the currency in charge line ?In result, I need that correct charge line will automaticly set in PO. 

Why does the setup below cause an error during the creation of extended site info in site screen?  when i change the status to active, i can create extended site info without any issue. Setup - BlockedError :-  

Hello,I want to cancel a work order because my customer made a mistake, but there are costs that have been transferred to accounting. is there a way to cancel the transfers?  when I want to cancel the work task  Thank you for your help

Hi!Why is it that if you want to send document links of Document Type = View, you can only select the Latest Revision option? Seems like I’m missing something here, but isn’t the view file also conntected to the document revision on the same terms as the original?/ Kenneth

 When the user clicks on Aurena no page is displayed and the URL now has the suffix #aurena.casual# On clicking on IFS Enterprise Explorer link again no login page and the URL now shows the suffix #rwc.client.path# Click on IFS Aurena B2B and nothing happens other than the URL now shows the suffix #aurena.b2b# If we add admin after the URL all the 3 options above work. Any ideas on why and how to resolve this issue?

Hello:I am re-introducing a topic that has been brought up before in both Workplace and here in the Community, but I have yet to see any input from anyone in Product Development with a solution or guidance.The issue is creating Lobby Navigation URL’s to “tree-enabled” screens like Equipment Object Navigator, Project Navigator, Sales Rule For Part, etc.  When navigating to these screens manually, the URL in the browser looks something like:https://<server_url>/main/ifsapplications/web/page/SalesRule/Form;$filter=<expression>;treeviewrec=<value>;treeview=Tree;treeclient=SalesRule;treenodeid=<value>;path=<value>;record=<value>;searchfilter=<expression>However, no combination of this URL type will work as a Lobby Navigation URL - you will just get framework-related errors.Looking through the 21R2 Lobby Navigation Guide, there are mentions of a “tree” URL type, similar to “page” and “assistant”, but there are no examples in the documentation that sh

HIDuring a customisation our customer has encounter a crash during the publicaiton to “public” of the customization. He has been obliged to kill the astea browser process.Now when he wants to redo is customization, when he save the customization  the following message is displayed “Another save transaction currently executing in customizationmanager module” and he is blocked. How can we solve this ?   

Hi,how or when is deployed Java code in projections?Is only way (except of running local Docker/Kubernates) to develop Java actions/functions develop it on TOP environment and recreate it before each test?Is there some other option to deploy these files to running instance - when they are already build locally?Or is here some automatic job what import it after commit/push? Or import on start of environment? ThanksBR

Hello , any one can help me to cancel paid posted supplier invoice , or can give me the correct way to reopen the invoice 

Hi all,On a DOP Order I want to change the structure and Routing Alternate.When I try to use the action button “Change Structure/Routing” I don’t have the possibility to select the alternate. Do you have an explanantion? Thank you per advance

Hello,  I have a question about period end vouchers. My client is migrating from 7.5 to cloud next month. Should the previous period end voucher be done on the new version they will be using then migrated or be done directly on IFS cloud ?  Best regards.

Does the functionality exist that would allow us to remove all DOP netted demand against part numbers?  We are about to undertake our stock take and always experience a problem where we are unable to adjust the inventory quantity if there are reservation quantities greater than the counted quantity.  I want to be able to remove all DOP netted demand prior to us counting.

When you receive a shop order, what is the calculation behind the scenes regarding check on the amount of material issued. I currently have the following scenario: Shop Order Lot Size = 10Material AQty per Assembly = 1Qty Req Excl Planned Scrap = 10Scrap Factor = 20%Qty Required = 13Qty Issued = 13 Despite the lot size being 10, I can over-report to 13. However, let’s say we increase the lot size to 11. I now have: Shop Order Lot Size = 11Material AQty per Assembly = 1Qty Req Excl Planned Scrap = 13Scrap Factor = 20%Qty Required = 14Qty Issued = 13 For some reason in this scenario, I can only report upto 10pcs. Reporting any more results in error message ‘Not enough components issued to receive this quantity’. Assuming I’m missing something, but I cannot see how I can report 13 in the first instance, but then only 10 in the second, despite the Qty per Assembly and Qty Issued not changing?

Hi All,  I am planning a work order on an equipment object with an associated manufacturing work order.  My WO has an Obstructive Operation status and I am warned that the Work Task may interfere with planned Shop Orders.  I can see that the correct work centre is listed in the prepare tab.  I have shop order operations planned for the same time as the planned dates in the Work Order.   I cannot seem to see the planned load on the Work Centre where it shows that a Work Order is planned to be executed.  Is anyone able to point me in the right direction as to what I may be missing?

Hello, Does anyone have a solution for how to set up a block that prevents a user from accidentally creating a counting report of all the system's inventory parts? If you run the "Create Count Report" wizard, no filters are pre-filled and you click OK immediately, a report is created on all inventory parts for you primary site. Thanks,Johan   

The auto-assign function is on, why doesn't it work?Automatically indude Mx Event at the bottom is still notCannot change to yes 

Trying to check for open service orders. This works, but checks for only one status. <root xmlns="http://astea.com.schema.bc.service_order"> <session email="" alias=""> <state bc_name="service_order"> <action name="execquery"> <attribute in_var="" out_var="" entity_name="order_locator" query_name="order_locator_scrl" sort_column_direction="+" sort_column_alias="request_id"/> <attribute dtype="argument" name="where_cond" value="(serial_no = '3090R720141') and (order_stat_uniq_id = 100)" operator="="/> </action> </state> </session></root>I want to check for < 500, but it does not parse as valid xml.Any ideas?<root xmlns="http://astea.com.schema.bc.service_order"> <session email="" alias=""> <state bc_name="service_order"> <action name="execquery"> <attribute in_var="" out_var="" entity_name="order_locator" query_name

Hi does anyone know where I can find a sizing guide for 23R1? thanks Gary 

Hello, We have a shop order with a main product and a by-product. A user is asking why the by-product does not appear as a supply on the part’s inventory part availability planning page.  Does or should IFS treat a by-product has a supply signal from a shop order? For context, the part that is the by-product is also part of the materials to be issued. Please see attached screenshots below. Any information or context would be appreciated. We are currently running IFS Cloud 23.1.7. Thanks,Kyle

Community, When I was entering a Parked Supplier Payment, I was requested to enter Series ID. then I am using LOV trying to select one value, but the LOV is empty. Wondering where to have this basic data created? 

Morning.  Anyone that can tell me what is the system effect of the “Generate” Action on the Graphical Position Structure:Thank you.Anya

Hi everyone,I wonder if anyone has documentation on all these configurations, how and when to use them?And which process (screen on IFS) is affected? Thank you in advance. 

Issue Short Description: After clone from PROD to Non-PROD environment, Crystal reports are not working. Log:[GetAppSetting] Get the value for OpenReportPath from Web.config.[LoadReport] Loading report : F:\IFS\crystal\OpenReportPath\Component Repair Card.rpt[LoadReport] DBUser = ifssys ,DBPassword : ******* ,DBServerName : DB_Server_name ,AppOwner : IFSAPP[LoadReport] Processing 9 parameters.[SetTableLocation] Set appropriate post-fixes for CR_WEB_INIT_A[SetDatabaseLocation] Generating fully qualified database object name for CR_WEB_INIT_AERROR in [ExportReportWithParametersAndlogonInfo] Error in exporting the report in rpt format. Logon failed.Details:  [Database Vendor Code: 1017 ] Logon failed.Unable to connect: incorrect log on parameters.Details:  [Database Vendor Code: 1017 ]   at CrystalDecisions.ReportAppServer.Controllers.DatabaseControllerClass.SetTableLocation(ISCRTable CurTable, ISCRTable NewTable)   at CrystalDecisions.CrystalReports.Engine.Table.set_Location(String value