Solved

for performing mass updates in FSM we need to set up columns according to the screenshot of the error message below:Unfortunately we cant find where to do this in studio. if anyone can assist I would be very grateful

when attempting to cancel the matching of a customer mixed payment then we have this error; Wrong Requirements for account 1900.  Please check code part demands Mixed payment cannot be cancelled as there is a supplier payment included that has been cancelled. How can we rectify this and remove the allocation of this payment from customer account/invoices?  

Dear All,When I enter a mixed payment, I need to change the default currency of the bank account. In my case, I can't change the currency. Ex : I have set AUD for my bank account and I receive the payment in USD. But system doesn't allow to change currency from AUD to USD. Even in mix payment line, it is not allowed to change the currency. Any help for this? 

I get following error message when posting the final invoice which is created from the customer order.ORA-20105: Invoice.ACCERROR1: Error (Voucher date for payment cannot be earlier than voucher date (28-MAY-22) on which payment on account CUPIA 45 was posted.) occurred while booking Invoice CD ****The customer order has one advance invoice  and settled through the mixed payment. But at the preliminary stage the final invoice has back dated the invoice date. Is that a problem? I tested all possible scenarios and at the final invoice level only forward day can be entered. Please suggest me solution. 

Hi everyone, i have this issue i was creating a new custom LU Entity, and in aurena i was create a  page configuration and projection conf.   i also create a relationship with project Entity. Then i try to create a List using this entity in the Project Definition Page but doesnt work, i dont know if i missing something . But i need can use this custom entity for create a list in project definition page, maybe i missing something. Thanks for the Help.Regards. 

Hello, We have the below problem in FSM Mobile: In mobile, some fields are “dropdown” type and we want to display predefined values. For example, the below field “CUSER_DEF221” needs to have some values in its dropdown, but in mobile the dropdown is empty. Screenshots below that show the steps that we have already done. The field of the custom table​​​​​​The ‘Lookups’ of this fieldThe global code table The field properties -1-The field properties -2-​​​​​​The actual field with the empty dropdownThanks a lot !! 😊

we are upgrading from 360 to PSO6 and cant find how to add or delete private activities in the Scheduling Workspace as we can in 360. Are we correct in thinking that this is now something that has to be performed in the Planning Workspace in Planning/Resource/Unavailabilities, or are we still able to add the unavailbilities directly into the Scheduling Workspace?thank you for your help

How All.How could I set up a parameter in Aurena Lobby to understand “Like” where condition with % so I will be able to type a part of the text.In the example bellow, if I use like condition with %, the element in Aurena doesn’t not work, just in IEE. IF I remove the %, it works fine.Is it possible?Tks a lot!this way works without %. In Aurena Lobby does not with %UPPER(ITEM_DESCRIPTION) LIKE NVL(UPPER('%$CPF_NOME$%'),'%')  

Hi , I have an IAL view which use a custom filed view(CFV) in FROM clause. when the topic environment is created IAL deployment failed with error “ ORA-00942: table or view does not exist”. I suspect this is due to configurations are not imported (CFV not there) when the IAL view is deployed as per logs. Anyway to solve the issue?Thu May 26 08:21:30 BST 2022] - INFO: Start executing /opt/ifs/build-home/database/ial.tem[Thu May 26 08:21:34 BST 2022] - INFO: Finished executing /opt/ifs/build-home/database/ial.tem[Thu May 26 08:21:34 BST 2022] - INFO: Connection closed[Thu May 26 08:21:34 BST 2022] - WARNING: DB: 7 errors were detected during deployment of DB objects[Thu May 26 08:21:34 BST 2022] - INFO: Running data import, logs location: /var/log/ifs/cbs/deploy_db[Thu May 26 08:21:34 BST 2022] - INFO: Trying to connect to the database to import data as user ifsapp[Thu May 26 08:21:34 BST 2022] - INFO: Connection successfull[Thu May 26 08:21:34 BST 2022] - INFO: Importing Application Con

Hello!In the ‘Jump to screen’ icon in FSM mobile, we would like to display only the screens that belong to this specific workflow, based on the ‘Workflow Condition’ script of every screen. Is there any way to configure it? (In the screenshot below, all the screens are displayed, OOTB and Customs) Thanks!!   

Hello All, Our customer wishes to use digital signature functionality so they have created a new custom event action for event DOCUMENT_APPROVED. Method:Edm_File_Sign_Util_API.Certify_Pdf_File (‘&DOC_CLASS', '&DOC_NO', '&DOC_SHEET' , '&DOC_REV' , 'Signature from IFS'); They have generated new user certificates in keystores window and when the user try to approve the document, below error “Invalid file name” comes.As you can see there are no special characters in the file name. When I check the application message I can see the same error message there.The message request xml is in correct form and has valid structure. <DOCDIGITALSIGNATURE_CERTIFYPDFFILE_REQUEST><DOC_CLASS>XYZ.01</DOC_CLASS><DOC_NO>COVA-111</DOC_NO><DOC_SHEET>1</DOC_SHEET><DOC_REV>02</DOC_REV><DOC_TYPE>VIEW</DOC_TYPE><FILE_NO>1</FILE_NO><REASON>Signature from IFS</REASON></DOCDIGITALSIGNATURE_CERTIFYPDFFILE_REQUE

Hi Is it a bug that  navigation searching  of aurena does not support fuzzy search with Chinese language1， “采购订单接收” page can be found ， if we  search the “采购“ key words 2，but if we  search the “订单” ，  “采购订单接收” page would not be found. 

Hi All,i am planning to use perform method using metrix xml in map function.  how can we capture response in xml maps.  as per document “Metrix 5 XML Messages” ,  ex: below is the xml message in map function . <create_task result_name="CreateTask01">       <request>          <request_id>{requestId}</request_id>       </request>   </create_task> Response ; <create_task_result result_name="CreateTask01">       <task>          <task_id>6198</task_id>          <accepted>N</accepted>          <plan_start_dttm>05/01/2012 03:19:00 PM</plan_start_dttm>          <plan_travel_to_min>0</plan_travel_to_min>          <plan_travel_return_min>0</plan_travel_return_min>          <plan_travel_start_dttm>05/01/2012 03:19:00 PM</plan_travel_start_dttm>          <fixed_commitment>N</fixed_commitment>          <status>OP</status>          <task_status>OPEN&lt

Hi, Is it possible to control (hide/show) the task’s status change icon on top right corner for different screens for the mobile app?  Thank you,João Oliveira  

Hi everybody,Is it possible in IFS Apps9 to manage the grants like quick reports?Is there something like this screen? Thank you and kind regards.

Is there a place in IFS IEE to see both active and historical work orders in one place? It seems you can only see historical records in one view and active records in another.

Hi All,We are an Alliance v12.5 site.We’re setting up a Customer Support workflow, but have a requirement for different SLA times, depending on what the Problem Code is.As far as I’m aware, the SLA times are pulled through to the Customer Support job, from the active contract that’s assigned to the customer, in which case the same SLA times would be populated regardless of what the problem code is.Is there a way that anyone knows of, where we could populate different SLA times dependent on what the problem code of the job is??cheersMark

I’m trying to move the elements (.rpi, _rpt table and _rep view… is there more?) for a custom operational report (this is an SSRS based report that I did not create) from one test instance of IFS to another.  Is there a way to do this from within the application?  

Is there a canned report that shows the historical weighted average unit cost of a part?  I can find cost on transactions or cost set history but not a log of unit cost changes as calculated by the system. Thank you!

Hi All, I am testing the New Part Assistant to be used by our Procurement team to create new parts. When we Selected the Purchased Inventory Part in the New Part Assistant, it creates everything correctly, except that the inventory part is Purchased. We woukld like the inventory part to be Purchased(Raw). Is there some configuration that we can do to maake it create the inventory part as Purchased(raw).

Hey all, *** THIS ANSWERED THE ISSUE ***:  I must have missed that both a year ago and this morning before I posted. Apologies! I switched the NLS Length setting in SQL Developer preferences to CHAR, recompiled, and the API package works fine now!   ORIGINAL POST...A strange error about a buffer being too small has happened again (happened a little over a year ago) in the INVENTORY_PART_IN_STOCK_API package.I am needing to recompile that package for debug, and as soon as I do (no code changes whatsoever, just a recompile), any call to that package results in the error: ORA-06502: PL/SQL: numeric or value error: character string buffer too smallORA-06512: at "BELL1APP.INVENTORY_PART_IN_STOCK_API", line 73 All parts of this API worked flawlessly up until now. Line 73 of the package body is this:last_character_    CONSTANT VARCHAR2(1)  := Database_SYS.Get_Last_Character;When I saw that line I recalled this happening before. I changed the size of the VARCHAR2 to 2 – still errors. Upped it

Hi Friends,  Can any one help me how to create Supplier payment on account. Regards,Naga

"Contract Desc" is still displayed in 21R2 as an 'Order by' option for Object Site/WO Site in Active Work Requests page.But it has been changed to "Site Description" in the latest Apps 10 Aurena.Can I expect the same changes in the IFS Cloud releases? I'm responsible for the Japanese translation quality, but it is hard to handle this "Contract Desc".

Hello,So I know that for the “Over Delivery” field, the system looks first to the Purchase Part, then if that’s blank, to the Purchase Group, and if that’s blank, to the Site. Question: How will the system behave if all 3 are blank?  

I am trying to add a new system administrator in our system.  The person has been granted full system access, but when he tries to create a new Employee File, he is getting this error:  Insufficient access rights.  You cannot modify Pers Protected data for the person JOHN.DOE. What access do I need to grant, so he can do this?