Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

We have a couple of report layouts that can’t be opened in Report Designer 200.3.0000The layouts work in IFS Cloud to generate printouts and they can be opened and modified in the older Report Designer for v10 (100.0.0003).The error message given, when opening the layout, in the latest version:“Mismatch between total span of value of 120 and no of columns of the table”Clicking OK on the message, the layout is closed and not possible to edit in this version. I can’t find anything in the documentation about this error, or anyone who can answer and help me how to address the issue.To be able to work around this I had to install the old version of Report designer on a different server, because the old version requires Java 8 while the new version requires Java 11 and I can’t make them co-exist on the same computer. The only location where ‘120’ exists in the RDL is in this location:                           <table-cell>                              <properties>               

Hi.We’ve been doing some modifying via page designer on request of our users and updating some fields on the Service Contract page as “Required”. Setting fields in a Wizard will highlight a required field in red if its left empty, but this doesn’t seem to be the case on pages that do not include wizards as seen here: You can see the * next to the field name indicating its required, but even when blank its not highlighted in red. This is also the case for fields that are not custom.Are the fields not being highlighted on regular views because they’re not required for creating the pages content such as in a wizard, or is there a way to get these fields to also be highlighted? Thank you in advance.

I have been trying to receive a shop order using an IFS REST API. main/ifsapplications/projection/v1/ReceiveShopOrderHandling.svc/ReceiveShopOrderSetI execute this request successfully. I append the correct fields, quantities, and toggle the flags to denote reception. All rolls smooth and returns and object key and tag reference.I then executemain/ifsapplications/projection/v1/ReceiveShopOrderHandling.svc/ReceiveShopOrderSet(Objkey='" + key + "')/IfsApp.ReceiveShopOrderHandling.ReceiveShopOrder_FinishExecute?"to finish the execution and flush the virtual table. Both requests are successful and return 200 status opcodes. However, nothing happens in IFS. There is zero indication any receipt was performed. I pass in the correct order number, release number, sequence number, and part number. I also append my finish request with the appropriate e-tag and object key.Is this a known bug? 

HiI am working on an integration IN IFS Cloud, where in PLSQL code I am getting the document from document management (as BLOB) and want to send it to Connect to be uploaded to ftp server using FTP_SENDER. I cannot find any method in PLSQLAP_SERVER_API that can handle BLOB message.Any suggestions would be greatly appreciated.Thanks

 Hello,I’m working on a workflow which :-  create catalog / inv / purchase / sales part on different sites- create routing and product structure, work guidelines and fill those with an original shop order / sales part datas- create a supplier for purchase part link and create price list element Link of png of the bpa as i can’t upload directly here : https://ibb.co/wrQvL9ZTThis include a lot of API GET calls to get data to construct POST calls, and to control state of data for logic control.I’m getting the following error when I try to inspect it (to finish to build the workflow) :“It took long time to inspect the Workflow. Please limit the amount of data and try again.”How am I supposed to avoid this ?Thank you

This is an issue I’ve faced for quite a while now, it’s been tested in both 24R1 and 25R1. Whenever I create an end event of type IFS Failure Event and enter another locale, it replaces any non-english characters with diamond question marks in the client. In this example I’ve used Swedish åäö but I assume it would be the same for other languages. So far I’ve just rewritten the messages with synonyms but it’s getting unfeasible with more specific messages.This is how it looks like in the designer: This is the message shown to the user: This is what the debugger shows: Is there any specific notation we can use to get around this? Is the issue in Camunda or IFS?

Hi All,We are facing an issue with IFS Cloud when uploading XML files to a third-party SFTP server hosted by a bank.When IFS Connect uploads the file to the SFTP server, it follows this pattern:Initially uploads the file as:ISO20022_55c5746a-XXXXXX.xml.partThen attempts to rename it to:ISO20022_55c5746a-XXXXXX.xmlIt seems the rename operation might be failing or getting blocked, possibly due to security policies on the bank’s SFTP server. In some cases, the connection is dropped or blocked entirely after this step.Has anyone else experienced this behavior with IFS Connect and SFTP?Is there a configuration in IFS Cloud to avoid using .part extensions?Skip or handle rename conflicts gracefully?Any best practices when uploading to strict SFTP servers (e.g., those that don’t allow overwrite or rename of existing files)?How can we ensure a smooth, secure transfer without triggering security measures?Any insights, experiences, or workarounds would be greatly appreciated!Thanks in advance

The possibility to change the command button sizes, so users don’t need to use to zoom. With this addition the command buttons will be more user friendly and will reduce errors.

In Mainsaver 12.9, is there a way to mass add/update the preferred/default Part to Vendor relationship?  I have about 1000 parts where we want to replace the current preferred vendor and it looks like we can only do this one by one through the end user interface?  Is there an alternative way to do it?I am an IFS Cloud user so I am very familiar with the Excel Migration tool in IFS cloud, but do not know if there is similar capabilities in Mainsaver.

Hello IFS Community, we are trying to create a fairly simple Quick Report for our accounting department that includes a few views and tables, one of them is the one called “gen_led_voucher_tab” but when we try to run the report we get the following:  {"code":1031,"message":"ORA-01031: insufficient privileges"} even if we try to run something as simple as :select *FROM gen_led_voucher_tab we have even tried to run this report using an admin user with what we believe it has all the permissions, but we are still getting the same error, so we are clearly missing a permission somewhere?? anybody has any idea what are we missing ? we are running IFS Cloud 24R2 your help will be truly appreciated !

Are Permission Sets data (Method Objects) stored in a table? I need to know where I can find this data? This shows a visual chech box of object method that are granted to a permission set. Where is this data stored?  

Dear IFS Support, We're planning to set up a High Availability (HA) MicroK8s cluster for our IFS deployment. Our current setup:2 VMs running MicroK8s 2 VMs running Oracle 1 VM ManagementQuestions:Is it possible to configure HA with just 2 nodes for IFS, despite the documentation mentioning a minimum of 3 nodes? If not, what's the recommended minimum configuration for an HA MicroK8s cluster supporting IFS?

I’ve raised a similar question before, but the answer didn’t really help us. Our business want to reserve parts in the portal. Would it be possible to add a button that reserves all the parts that are in the list of planned materials?We’re thinking, a Workflow could run that would do this, it would look at the parts that have been planned on the work task, and then reserve them.Has anyone tried this?

Hi! I’m trying to get into APF Development. I installed Visual Stuido 2013 and  IFS APF Development extension. After opening a solution visual studio just shuts down with no messages or errors. Does anyone know how to fix this issue? visual studio version 

Recently we have found that when starting the Apps10 MWS using the mws-svr command we get timeouts at 10 minutes. There doesn’t appear to be a RAM or CPU usage issue at the time of the failure and monitoring the system closely shows no sign of that even coming close to much load on either or large java process RAM usage, but I suppose we cannot rule it out. If we keep restarting the Windows services and restarting using mws-svr it typically comes up OK after several attempts.Questions:Assuming that the CPU and RAM is fine, is there a way to increase the 10 minute timeout threshold?Any other ideas?Here’s what we typically see, sometimes with MAIN not starting, other times it is INT that doesn’t come up, and sometimes both:---Starting Domain - IFSTEST...11/19/25 4:51:33 PM <WARNING> Thread[Thread-15,5,main] did not responded - TIMEOUT11/19/25 5:01:33 PM <WARNING> Thread[Thread-16,5,main] did not responded - TIMEOUT Domain - IFSTEST - STATUS   AdminServer : RUNNING   Node - FB

Inquiry to IFS Regarding WebLogic CPU/PSU Compatibility for Apps 10 UPD281) Official confirmation of compatibility/certification for Oracle WebLogic CPU/PSU 12.2.1.4.250716 (July 2025) on IFS Applications 10 UPD28, or2) Clarification of the latest PSU currently certified for IFS Applications 10 UPD28. (If UPD29 is relevant, please also confirm the latest certified PSU for UPD29.)

Hi everyone I try to implement an LOV on ProjectList where you can select numeric values defined in a basic data table. The values should be presented as percentage. The values in the basic data table are defined from 0 to 1 (e.g. 0.75).It works:in edit-mode of the List/Table in the Selector (combo box)It doesn’t work:in the default mode for List/TableLOV   lov CProForProjRef with CRealProbProjSelector {      label = "Real. Pro. Proj.";      search = RealProbProj;      format = percentage;   }Selector@Overrideselector CRealProbProjSelector for CRealProbProj {   static RealProbProj {      format = percentage;   }}Is this a bug or do I missing something?Thanks in advanceMatthias

Hello everyone,I am experiencing an issue with QRCode rendering in IFS Report Designer (version 21.1.1.0) on IFS Apps 9.4.I am designing a small label report that contains a QRCode.The problem is that the QRCode always shows unexpected additional padding/margins around it, which causes layout misalignment on printed labels. Here is what I have observed:DataMatrix works correctlyWhen using CodeType = DataMatrix, I can fully control the quiet zone by setting:<barcode-datamatrix-quitezone>0.0</barcode-datamatrix-quitezone>This successfully removes the unwanted white border and the barcode fits perfectly inside the bounding box. QRCode ignores quiet zone settingsHowever, when I switch the barcode type to QRCode, the same approach does not work.I tried the following properties:<barcode-qrcode-margin>0cm</barcode-qrcode-margin><barcode-qrcode-moduleSize>0cm</barcode-qrcode-moduleSize><barcode-margin-left>0cm</barcode-margin-left><barcode-mar

Simple question, can you, when provisioning a user, using SCIM from Azure link the user automatically to companies and Sites?https://docs.ifs.com/techdocs/25r2/030_administration/010_security/025_scim/#user_attribute_mappingOr can you only create users and you have to add the companies manually?  

Hi Team,I’ve added custom fields to the Equipment entity in my IFS Cloud environment (Cust layer). Now I need these fields to be displayed and accessible in the Mobile Work Order (MWO) app. Could someone guide me on the correct steps to expose these fields in MWO .ThanksVenkat

I’m trying to write a workflow that updates the Ownership on a Purchase Order Line.  When I try to do the Update, I am getting this error:PurchaseOrderLinesHandling.ETAG_INCORRECT: ETag is incorrect Any suggestions on what I am doing wrong? 

Is it possible to replace the splash image via a Service Now Ticket ?? --  I’m referring to the image found at IFS-CLOUD-AERO-DEF.jpg (1920×1080) ?? Thank you!

Hi all.I have a client that wants to sort the tabs you displayed in the Attachment pannel however he wants.I have this configuration: And IFS display the following tabs: But the client wants to have the Documents tab always the first one. So, I edit the line and choose the sort he wants: Press ok button and IFS display the connected services as in the beginning. It seems that IFS does not pay attention to the order of connected services. It seems that there is an ID or something like that.Does anyone know how IFS orders these services? And how can we change that order? Thank you in advance. Best regards Sergio

I tried to create a layout using report studio for a newly created report. then I got the error below, designing tools are not visible.. 

Hi All!We are planning to upgrade customer environment from IFSAPP9 to IFS Cloud version.Also, we have made some modifications - the new forms were created.And customer would like to save these modifications on new IFS version.Is there any tool to facilitate the execution of an upgrade task, meaning converting existing IEE form code to Aurena page code?Maybe some kind of code parsing/refactoring/converting tool?Does anybody have such issue in customer project?Thanks in advance!Best regards,EPSDANMI