Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

im using IFS app 10, recently for many work orders their planned and expected finished dates are not showing. how do i resolve this?

I am playing with IFS Workflows and encountered an issue where workflow isn’t triggered. My workflow is designed to automate the “Picking” of CO from quick order flow handling screen using “Report Reserved Quantities as Picked”.Read CO Quick Order Flow: First Block reads the Quick Order flow data using Order No.   Second Block: Only executes if the Objstate is “Reserved”. I am calling the action “ReportReservedAsPicked(Selection,LocationNo):Void” to pick the CO. You can see that it’s executing properly in the test mode (Inspect BPMN diagram) Triggering the workflow using Event Action:

Hello,We have been experiencing some issues where a Sales Charge Type which we no longer use has been being selected as the charge type on several Customer Orders. It is causing issues with how charges are getting processed on these orders. So we would like to know what our options are for deactivating, hiding, or deleting this particular Sales Charge Type, either on the Sales Charge Type screen itself, or on the Customer Order. Can someone point me in the right direction?Thank you,

Dear All,I am currently working on an integration where I need to send a CSV file to an SFTP location.The application message has been successfully created. However, I observed that, although I intended to send a CSV file, the message input data contains an XML file instead.  The expected file name is correctly specified in the address data section.At present, the SFTP sender is deactivated, which is causing an error. Therefor I am unable to check the actual file.My concern is if the file type mismatch could impact the successful completion of the application message. I would appreciate it if anyone could share their thoughts or insights on this matter.Thank you in advance for your assistance.Nija

Hi Team, There are some configurations and customizations done for CustomerOrder screen and i am unable to open the page designer as the page throws error right after navigating so how do i resolve this?  Any help on this would be much appreciated Regards,Rakesh

Hi,We have just upgraded our environment from 23R2 to 25R1 and when we print, we cannot see our local printers anymore. We only see our logical printers.All looks ok on the Aurena agent side, anybody has experienced this problem too ? Thanks and Regards,Anne-Sophie

BuilPlace capture all activities (Jobs) with the invokers email etc, however it seems it doesn't send any email notifications when Jobs status changed by cloud. This is very difficult as we order sanity builds etc that cloud teams perform but since there is no notifications , we have to log to builplace and keep refreshing to check if the jobs are performed or not.

Hello community, I scheduled database task for couple of companies and rate types. However one of rate type is not updating and there is an error in BPA_ASYNC_SYS_TAB. I can see in the observations that the request is reaching to workflow. However, the rate is not updated properly. When I run rate update by start now then it is updated without problem Anyone has idea?  ThanksFurkan

Hi All, Thank you for taking the time to review this post and hopefully provide a solution. As the title indicates, we’re looking for a way to migrate users from one environment (e.g., UAT) to another (e.g., Production). We’re currently implementing IFS Cloud, and manually creating accounts in each environment has proven to be very cumbersome. If there’s an “easy button” or a streamlined approach to handle this, it would be greatly appreciated!

i’m probably missing something. Trying to make a simple call to CustomerOrderHandling to creat the customer order Header.tried it with simple quotes and without ‘ Always having error  When trying the same this with postman my order is createdany Idea please?  

Hi All, Is there a way to track or log failed login attempts in IFS Cloud 25 R1. Regards,Sahil Gupta

Hello All, I am trying to add all the columns from the column chooser , so i am taking all the columns from left to right side and click Okay than all the columns are visible in list in table format but after that when i am refreshing the screen than columns are not visible and its went back to the left side again in a column chooser. I am trying to add again than again same issue . When i am taking 241 columns total and refresh the screen than its visible but for more than 241 this issue is coming. Same for the Purchase Order Lines tab also here i am able to add 234 fields only if I’ll add more than 234 than this issue is coming.I wanted to know there is some limitation from the IFS side or what. Thanks,Pallavi

Hi all,We have built a custom API that changes a field (IFS Cloud).I built the Custom event so that whenever this field is changed with “value,” the workflow is triggered. This works fine if I run the custom API from Postman or the value is changed using IFS Cloud. But for some reason, when it is sent via IFS Connect (Using Projection as Routing Rule), the workflow is not triggered.Do you have any idea why this is a different behavior? Thanks,

Hello, I am attempting to create an arrival to receive a Purchase Order line via REST API. I am inspecting the endpoint calls that Aurena makes during the process, but i’m unable to figure out which call is actually performing the receipt. I see calls to CreateReceiptSet but the payload doesnt include the information from the arrival line (PO #, Line, Etc). I also see CreateArrivalReceipt, but it only uses what i assume is the OBJKEY that is returned from CreateReceiptSet. I know this is a little tricky because an assistant is involved, but I cant seem to make sense of the calls that are happening. Any tips for figuring out how this assistant works? 

As the topic says, I have an IAL, and would like to reference data in a QIS.However, when I do this, and try to create the IAL, it says I have insufficient privileges.I’m referencing the QIS as below… with IFSAPP.SELECT tm.Week_Commencing from IFSAPP.QFACT_EDF_TIM_REG_DATA_IAS$ tmAny thoughts?

Hi, I saw that in Cloud there is a possibility to export/import a personal profile in the same way as it works in IFS 9. That's good, although something is left. 😊There is no problem with performing a single export.However, I wanted to ask how do I perform a bulk export of all profiles (select all + export).I would be grateful for your feedback. Regards,Patrycja 

We are currently working on our IFS Cloud Upgrade project. So we have installed 25R1SU5 on test environment and 24R2SU9 on our dev.This week we realized that the Web DevTools are no longer working for both environments.I suspect the latest update(s) for MS Edge to be the cause of this problem. The problem manifests itself like this. I open IFS Cloud, active the devtools link. Then I press F12 and I can see the standard network traffic from IFS Cloud and I can also Inspect web page elements.As soon as I activate the IFS Web DevTools there is only the start page shown. No network or trace information:Also the network traffic is no longer recorded and stopped. I cannot inspect page elements anymore and the reload for the page is not working. Is anybody else experiencing this problem and has found a

In 25R1 SU2, I’m trying to connect the Standard Entity JtTaskTransactionUtil to the Projection WorkTaskHandling. But when I try to create the Key Mappings for the Entity Association the Child Entity Key, LoV is empty. Is this a bug or am I doing something wrong? 

Working in earlier with IFS Developer Studio using Marble, I do remember that I could get hints and guidance when writing code. For example, if a added an attribute to projection entity, I could easily see (by a tool tip or something alike) which settings/preferences I could use for that object. Like a reference documentation in the editor.Is this still possbile to switch on? What do I miss in my setup?/Fredrik 

Hi,In Aurena, we have a projection GLVoucherRowsAnalysisInside we have the entry date "EntryDate": "2021-01-14T09:46:58Z",But this field is not in the Voucher Row table, it is in Voucher Table. So this field is not indexed. Is there a way to index it ? or create a custom field that we can index ? I have created Cf_objversion to display the hidden objversion on the row level, but same issue …How to access the Objversion as it could replace the EntryDate?The idea is to use this column to create an update query that appends new lines to our Fabric Datalake. But if it s not indexed, the query is very very slow (we use standard Aurena API EndPoint). So it works well on voucherdate, but this date is not interesting for incremental refresh.

Hello,I'm struggling to populate a multi-choice Custom Enumeration attribute via Camunda Workflow in IFS Cloud. I have a custom attribute (e.g., Cf_Factory) that is a multi-choice (multi-select) custom enumeration. When adding a row using the UI, I can see (in the debug console) that the field expects an array like:Cf_Factory: ["CfEnum_London", "CfEnum_Manchester"] When I try to create this row using Camunda Workflow, things break: If I set a single value: execution.setVariable('Cf_Factory', 'CfEnum_London');, it works. If I try to set multiple values, nothing works. I’ve tried multiple things via a Script Task: ArrayList, Spin, comma-separated (["CfEnum_London","CfEnum_Manchester"]), etc Has anyone successfully set a multi-value (multi-enum) Custom Field via Camunda Workflow? Surely this must be a common task and usage for Workflow

 I am trying to access some data via web url using the link generated from “copy data link” When I tried, I got an authentication error saying "We couldn't authenticate with the credentials provided. Please try again."I'm using- IFS Cloud 25R2- Office 365 E3 for Excel.There's a similar question in this post, but I can't reproduce it with a different version. Does anyone know how to solve it?https://community.ifs.com/framework-experience-infrastructure-cloud-integration-dev-tools-50/ifs10-rest-api-authentication-from-ms-office-error-49792?tid=49792&fid=50

I have been told it is not possible to have a menu option/button from a form (eg Functional Object) taking the user to a Lobby and passing a parameter to the same, where the link is dynamic using the environments URL rather than hard-coding it, creating extra work when db is copied having to change hard coded URL’s. Isn’t there a way to have a dynamic URL in this scenario? e.g. https://prod.domain.se/main/ifsapplications/web/lobby/9bc0e701-c84a-4cc9-990b-f98dcb475ed1 and https://test.domain.se/main/ifsapplications/web/lobby/9bc0e701-c84a-4cc9-990b-f98dc

Hi, Do anybody knows if there is a possibility to add “Tooltip” for Lobby Element?I see it could be nice to have more explenation in details what the element contains/shows.Is it possible?Br. Barbara

I am using 22R2, remote deployment model after importing standard dashboards from ifsroot\infrastructure\ifs-monitoring\dashboards my all database panels are not showing data in Grafana dashboard If anyone knows what to do it will be very helpful,Thanks in advance