Upgrades & Updates

Hi all,Strange problem i have.I have a very long IAL that is calculating labour efficiency so hits time card, shop floor clockings, operation history and oper history.Runs fine when the IAL is set to live data only (apart from time card where i made a CLU to get that data before IFS HR gets in the way).Now when i switch over to copy all data. Which i need to do as it takes 30 mins to run. All the Hours clocked are 0’d off which comes from shop floor clockings.If i run the report from IFSAPP it shows correctly and in crystal the report shows correctly if im using the live data.So why when its copied data the number is 0’d off?I am thinking this is the HR module getting in the way but that should only happen with live data.Also i cant find anything wrong with the code plus it works.Permissions are fine for ifsinfo too. Im not sure what is different about storing the data when compared to the IAL view version.Bit odd. Otherwise i can keep it as live data and then schedule it but i dont wa

Hi All,I am looking for information regarding the new exploit Log4j and older customer environments. We are in the process of migrating from IFS 7.5 to IFS Cloud but we do need to keep our 7.5 environment serviceable for the short-term.I appreciate that it not the highest priority as there is likely a smaller customer base and it is an end-of-life product. However can we get some details regarding:The exposure of IFS 7.5 Environments to the Log4j vulnerability Expectations around if any patches, mitigations or updates will be provided to these environments if they are found to be exposed?Even if the answer is no, we do want to understand the exposure so we can take the right actions internally. Any info is appreciated! ThanksNote: Sorry if posted in the wrong place, first post!

Dear experts,One of our customer is running IFS version 8SP2.Please let us know in case any thing need to perform from our end. Regards   

Hi ! Everybody, Is there anyone can help me on this topic?I USE IFS8. In function Solution Manager\Configuration\Logs and Queues\Setup History Log, how can I see all settings existing quickly? So I know if they is the log setting already which I want. Otherwise I have to take about 3 minutes to find the component, table and field.   And is there anyone can give me a simple instruction on how to choice Sub forum? I really don’t know which sub forum should I select for this question. 

We are a customer with Developer License, we handle our own upgrades and are set as Prime. Our IFS rep has just set us as «Self Sevice Enabled» so we can get access to IFS bugs and patches. But they are unsure where we can access and download them. Their view is probably different from ours. Does anyone knows where we can access them? We have access to partner.ifs.com, community and support center. 

We have an on-premise server that is working with version 21.1.2, and we have previously gone through the build place update process to push the version in the build place to 21.1.4. this has generated a delivery. However have not yet applied that delivery to our on-premise server, but are now looking at moving up to 21.1.7. If we move the build place to 21.1.7 and then generate a delivery, does the 21.1.4 delivery need to be applied to the on-premise server, first THEN 21.1.7? Or can we just apply 21.1.7 and skip the older 21.1.4?

Hi Community,    Anyone working on this subject , which is image migration via FND tool/Script in Employee Screen.    Kindly assist us that how can migrate Image into Employee screen via Fnd/script.    Thanks in advance.

Hi,We are in the process of installing patches in our IFS environments, but we are unsure regarding the process as we are maintaining our own customization layer. Some background information around our build and delivery process:1. Merge update received from IFS into our archive folder.2. Generate a new build home (without our customizations)3. Generate a docker image containing the build home. This is done in order to run multiple builds at the same time. 4. Build and install a new delivery from-to the correct update version. 5. Continuously build and install deliveries including our customizations.Step 1-4 are we doing only once for each update.The question is, how are we going to include patches into this process? Do we have to add new patches to the archive folder and generate a new build home for each patch or series of patches?

I have a custom page with 1.5 million records that i need to highlight.When i try to select and page down, i am finding that it stops highlighting records after about 5 or so pages.However, if highlight and go up the page it keeps the records selected.So wondering, if i could skip to the bottom, it would make things easier.Does anyone know a quick easy way?I have tried CTRL down arrow, CTRL+SHIFT+END etc.. no joy!

Hi, Currently we are using IFS Cloud 21R1.Please suggest the upgrade process from IFS Cloud 21R1 to 21R2. Regards,Srini

Hello, I’ve recently joined IFS as a User Experience Designer and am looking into the area of release and feature adoption.I’d love to know as customers or partners, how do you go about identifying features to adopt, particularly new features?What sources do you use to find out information and have you experienced any challenges?Please respond in the thread or I’m happy to set up a 30 minute call to listen to your experiences and needs, if preferred.Thank you.

Dear communityI want to hear some advice from you about IFS update. One of our customer is considering IFS Apps9 update from Update 6 to Update 17.To reduce some cost, we will run Update Analyzer and skip detailed verification of the files resulted "No Impact" by Analyzer. [Need advice]Could you tell me about risk factors of skipping detailed verification on "No Impact" files ?For example, some factors might need to be verified anyway because they are out of scope of Update Analyzer.Or maybe, somebody could tell me about actual problems in update caused by skipping/reducing verifications on "No Impact" files. I heard that a similar tool for other ERP software was too loose and failed to catch many "Impacted" parts in its analysis.I believe IFS Update Analyzer is much tighter but I wonder how can I trust on it. Thank you.

Does anyone know if There is a way to log into Aurena with the APP owner account when using SSO. There is the admin link for enterprise explorer is their a similar option for Aurena?

Hi,I would like to know how can we validate impact of the deployed configurations in environments prior to an update. Thanks,

Hi, A markdown Editor field has been used for one of the customizations in App10 Aurena (UPD9), but the below client error is encountered (appeared to be a RnD bug): Example of a markdown editor field used for a customization in Aurena (UPD9)Client error which is encountered in Aurena (UPD9) due to markdown editor fieldDoes anyone familiar with this client error or a relevant correction ID?or else, Could anyone please provide me an example for a functionality in which a markdown editor field is used in standard IFS (Aurena or Cloud versions)?

Hi Community,    I wrote a script for migrating loge(image) in Customer Screen for customers.    I am unable to migrate Logo customer wise.    Anyone has an idea about this, Kindly assist us. Thanks in Advance.   

Stream serve functionality is replaced with what in IFS Cloud

Hi, I have an issue with permit report using report designer. Nothing is showing when I preview the permit report. Only logo and date is showing, nothing else. I think some issue with table connection. Can someone help me with this?

repeated error occurs (for random users)while navigating in APP10 IEE  A connection attempt failed because the connected party did not properly respond after a period of time,or established connection failed because connected host has failed to respond 10.100.1.250:48080

Hi Team,I have added the image location in system parameter in IFS Apps 10 and i pasted the image in the same location physically.I am try to import the image in report desiginer in Add graphic scection but i am getting the below error. Can anyone help me on this issue.Thanks & Regards,Sivakumar K

Hi Everyone, Can someone please advise how can I set favorites in IFS Apps 10 on different screens and how do I share the set favorites with a team member. Regards, Urvaksh

How to change the Address Presentation, especially the Zip Code which is required to be Post Code,  we have an Address Template set for the UK, but this still displays ZIP CODE. 

It may be a poorly worded question, but just wondering if its possible

We are working in a Citrix Build Place for Apps 10 for a customer.We have noticed that different files being generated in Dev and BnT build_homes although the same .plsql file is present. The code generated in BnT build home does not contain the customizations. The .plsql file is fetched from Harvest for code generation and development team do not get any issue when generating code in Developer Studio. The file has not been modified for the past couple of years.Eg:Component: callcFile : CcCaseContact.api/apy generated through CcCaseContact.plsqlIssue: Get_Default method does not contain the attributes added from customization and does not contain customized methods in BnT build home but correctly generated in Dev build home

Hi We have a CTU User limit of 350 in the SFW CTUand Current usage says 350We have on one site 258 Shop Floor employees set as Workbench Userand on another site 12 employeesSo the question is how 270 users count as 350?Or are some other users also counted?br Per