Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Hello IFS Community,I’ve been struggling to identify the parameters required for the API method CONFIGURATION_SPEC_API.Get_Objstate in the API documentation from API Explorer.Could someone help me figure out the parameters? Additionally, if you could share a brief explanation of how you found them, it would be greatly appreciated. Thanks,JL

We’ve begun exploring using digital signatures on our Purchase Orders recently. We want User Signatures to be used for our buyers, and we want a Common Signature to be used for non-purchasing staff. To clarify, if Jane Smith from Purchasing prints a PO, we want Jane Smith’s signature to print on the PO. But, if John Doe who works in Project Management prints a PO, we want our common signature to print on the PO. I’ve set up two keystores for each scenario - one for a buyer and one for a common certificate - and I’ve been able to get both of them printing on a PO.  The problem I’m having is I’m not sure how to write a  report rule condition to:Check if a user has their own keystore value.  If yes, print the PO with the user signature If no, print the PO with the common signatureIt seems like something like this should work: But it’s not working, and the documentation I’m reviewing here doesn’t include a lot of examples for configuring report rule conditions. Any help would be appreciate

 Hello IFS Community,We are encountering the following error message when attempting to create a customer order:"ORA-20111: CustOrdCustomer.ORDERATTR: Customer ZZZZ has no delivery address with order-specific attributes specified." Error: No delivery address with order specific attributes specified | IFS Community I have reviewed a similar issue discussed in the topic, "Error: No delivery address with order-specific attributes specified" on the IFS Community, which suggested a potential solution. However, the key difference is that we are using IFS Cloud.For Customer ZZZZ, we have both a delivery address and a document address configured. Despite this, we are unable to create customer orders for this specific customer.Has anyone else experienced this issue in IFS Cloud? If so, could you share the steps or solution that worked for you? 

Hello everyoneI’m looking for the packages / procedures to use to generate an informative and / or a confirmation popup, but can’t find it.For error, we use “Error_Sys.Appl_General” procedure which trigger an error modale/pop-up on the cloud client, but for user experience, I’d like to use different kind of popup corresponding to the result of the action.Thank you

Hello Community, When I start a process from the context menu, I change a field in the form.But the screen shows a confirmation to save the changes (yes/no/cancel).My expectation from the context menu:When it starts the process, it should make the change (db - modify) and refresh the record. it should not ask for confirmation. Visual Studio (frm) IFS Screen:context menuafter clickActually, after clicking on the menu, the save happens. But it still asks for confirmation. RegardsBaris

Does anyone face the problem with big amount of rows in this table? There are over 5mln unique sequence numbers, over 100mln of rows. It looks like most of entries come from wadaco processes.After short code review there is no any cleanup proces to purge this table. There is only on API procedure to delete entries(Shop_Material_Assing_Util_API.Clear_Reserve_Locations) but I think it should be possible to schedule cleanup process for that.  

Can we Store our password in  Azure secret and use those  in IFS installation scripts

I have a Lobby element that is connected to a datasource that is using an IAL to get the data. I can’t seem to get the navigation to work in the lobby element to open up Customer Order Lines and filter that by a custom field. I’ve set the datasource in the List in Page Designer after I added in the custom field as well and it still errors out with this: "The property 'Free_Charge_Reason', used in a query expression, is not defined in type 'IfsApp.CustomerOrderLinesHandling.CustomerOrderJoin'."}] Is their something I’m missing here? 

Hi everyone, i need some help.We have a custom field added to FinNoteText LU which is the one used by the notes list in Posting Proposal page but i can not add it in aurena.I tried looking for the entity in entity configuration but it is not listed there.Any idea on why i can’t add this custom field to the list? or why i can’t find the entity configurationit does not show at all.

Hi, sorry was not able to phrase the question better, but here’s my issue: I’m trying to do a customization in IFS Cloud, where I have to add a new attribute to two different entities (InstantInvoice & CustomerOrderInvHead). In both cases I do it the same way, in a Developer studio project choose to customize the respective entity, and then add a new attribute to the -Cust entity. Below is a screenshot of the Instant Invoice one: For Instant Invoice, this works as expected, developer studio generates a .cre file that can be used to add the new column to the InstantInvoice table. However, the issue I’m running into is that the other entity, CustomerOrderInvHead, is somehow a different kind of an entity, and doing the same customization to it does not yield a .cre file at all, and it seems as if the whole entity does not contain an underlying table, but rather is just extended from the Invoice entity. In such a case, how am I supposed to add a new attribute to it?

 Hi, We are reaching out to you regarding an error we have encountered within our IFS system, specifically related to the Crystal Web Service configuration. We need your guidance and expertise to resolve this issue promptly.The error message we are receiving states:"Crystal Web Service Instance(s) are incorrectly configured or not reachable. Please contact your system administrator."   We would like to inform you that we have thoroughly checked the Crystal Web Service and it is currently operational. Additionally, the IIS site is functioning correctly, indicating that there are no underlying issues with its configuration. In our troubleshooting efforts, we have attempted to disable the antivirus software temporarily but unfortunately it did not have any positive impact on the error.As a further step, we restarted the server in the hopes that it would address the problem, but unfortunately the issue persists. We are now seeking your assistance to determine the required actions to resolv

Hi All,We are currently working on an integration, and with ROPC authentication, we consistently receive a refresh_token with a lifetime of 7200 seconds (2 hours). This implies that if no API requests are made to IFS within this period, the connection is lost, which could easily occur overnight or over weekends.["access_token" => "xXxX""expires_in" => 3600"refresh_expires_in" => 7200"refresh_token" => "yYyY""token_type" => "Bearer""not-before-policy" => 0"session_state" => "zZzZ""scope" => "audience email microprofile-jwt profile"]Is there any configuration or method available to extend the lifetime of the refresh_token?For reference, the customer is using version 23R2.Thank you in advance for your assistance.Nija

In custom screen we are trying to save attachments directly to FTP location via SFTP. we have IFS10 UPD 11 on premises.does IFS10 supports SFTP?  in repository we don't find any option expect ftp. whereas most the FTP location like Microsoft azure supports SFTP (Secured) only.if SFTP is possible, how we can achieve that?

Hello!We want to add a Markdown text (with a guideline to end users) in page designer, and we wish to format the text and/or the background. TechDocs has a limited description of Markdown Text with regards to formatting, but in the example from page Balance Transfer Log, the markdown has yellow background: However, when I am using page designer to add markdown text, I dont have any other options than to alter the text itself - no formatting options.Are there any possibilites for formatting the text and/or background - and if so - how?Best regards,Henning

The Request Work Task page has a key value of Task No (Task Seq). The same page at the line level contains an assignment tab where the key value is 'task_seq'.How to navigate using line level task seq  Element Design Datasource design   How to navigate to using line level key value parameters

Hello,I'm struggling with making my report work to use a dynamic search filter under Pivot for part_no. Does anyone have experience with this? Note, I don't use pivot in SQL very often and tried different approaches.I tried creating a subquery for shop_ord without success. I've also tried using regex:part_no IN (SELECT trim(regexp_substr('&part_no','[^;]+', 1, level)) AS q FROM dualCONNECT BY regexp_substr('&part_no', '[^;]+', 1, level) IS NOT NULL ) I also tried to use query flags without any success. So, I'm a bit stuck and unsure whether this can be done. Does anyone have experience with this? My SQL:WITH weeks AS (    SELECT TO_CHAR(TRUNC(SYSDATE, 'D') + (8 - TO_CHAR(SYSDATE, 'D')), 'IW') + (LEVEL - 1) AS week_number    FROM DUAL    CONNECT BY LEVEL <= 21),data AS (    SELECT         TO_CHAR(TRUNC(s.REVISED_DUE_DATE, 'IW'), 'IW') AS week_number,        s.PART_NO,        SUM(NVL(s.REMAINING_NET_SUPPLY_QTY, 0)) AS total_qty    FROM SHOP_ORD s    WHERE         s.STATE IN ('

Hi nayone seen this issue. We have an Airgap installation but when accessing all kind if iam pages we get a server error. When looking into the odata server log we find this jave exception stack com.ifsworld.fnd.common.exceptions.ODataProviderException:Error while invoking method iamUserList().  at com.ifsworld.fnd.storage.invoker.JavaOperationInvoker.invokeOperation(JavaOperationInvoker.java:166)  at com.ifsworld.fnd.storage.invoker.JavaOperationInvoker.invoke(JavaOperationInvoker.java:91)  at com.ifsworld.fnd.storage.invoker.BpaInvokerWrapper.invoke(BpaInvokerWrapper.java:168)  at com.ifsworld.fnd.provider.processor.FndComplexCollectionProcessor.readComplexCollection(FndComplexCollectionProcessor.java:116)  at org.apache.olingo.server.core.ODataDispatcher.handleComplexDispatching(ODataDispatcher.java:411)  at org.apache.olingo.server.core.ODataDispatcher.handleFunctionDispatching(ODataDispatcher.java:207)  at org.apache.olingo.server.core.ODataDispatcher.handleResourceDispatching(ODa

Has anyone experienced an issue where a user adds a shortcut to their navigator, save their profile and then upon their next login it disappears? I also have had users report that they’ll add a column to a table view of a screen, save their profile and that also disappears upon their next login. 

I have a lobby element that will filter out Shop Order Operations by selecting rows where the Need Date is between the two parameters WeekStart and WeekEnd. I used to be able to click into the element and get brought to Shop Order Operations with the datasource conditions, but since adding everything past “List” it errors out. I’ve tried a variety of solutions and nothing seems to be working, what am I missing?  

IFS Cloud record windows have an Attachment section which offers generic services defined in Object Connections.Is there any documentation on these functionalities?Is there any Academy courses on Attachments section?Of course I can look for Help on each of the topics, but was just curious of there is some kind of comprehensive overview 

Hi Community,  I am currently working on an IFS Cloud Installation and would like to customize the default IFSAPP username during the setup process. I understand that IFS Cloud typically uses IFSAPP as the default application user, but due to specific requirements in my environment, I need to modify this to a custom username.Following F1 Links I found during the search, however unfortunately it won't work.  https://docs.ifs.com/techdocs/22r1/070_remote_deploy/400_installation_options/130_add-on_cmp/maintenix/10_installing_mtx/#installing_the_co-deployed_databases https://docs.ifs.com/techdocs/22r1/070_remote_deploy/010_installing_fresh_system/200_installing_ifs_cloud/035_ifs_cloud_ifsinstaller/030_installation_parameters/#specific_certificate_for_pods I’d appreciate any guidance, best practices, or documentation links you could share on this topic.Thanks in advance for your help!

Hi.I wanted to check with the community if you know whether is possible to have scheduled Quick Reports to generate a .xlsx and have it copied to a SFTP location. So far, we have the Quick Reports scheduled what would we need to do from this point? Should we configure to generate the .xlsx and archive it? Do we need to configure the PDF_REPORT_CREATED event to generate an Application Message? Will this Application Message have the .xlsx file so we can configure a SFTP Routing Address? Or maybe a different approach is required. Thank you much for the help.Best regards.Gonzalo. 

Hello,I created a small table in Dev and I have used postman and created a POST request and pushed some sample data into the table. Looking at the documentation(little confused by it), I can see that through IFS Connect there is Inbound for Routing Rules.In a real business scenario, do you know what steps are needed to allow us to receive data from a supplier via REST? ThanksRoss

HiWe are facing an issue on 24R1 on user connection.We configured a Azure AD authentication with SCIM module. User creation settings are as follows, as recommended in technical documentation.  However, at first connection, when user clicks on Log in with SSO Azure CFG, he is asked to modify his password. After that, user can connect both way : with SCIM by clicking on “Log in with...” and by filling Username/password. Does anyone has any ideas on what is wrong on our configuration ?Many thanks

We can access value after modification and value before modification of a field in Aurena client as follows:We can use origianl.<field name> to access the value before modificationEx:DateApplied= Modified value is stored original.DateApplied= Value before modification is stored Best Regards,Buddhini Samarawickrama