Hi,
Anyone has experience using serial rule-automatic ? We tested, it's just sequential number. Wondering whether it could be like manual serial, we could set up prefix, length...somewhere in the system?
Thank you.
Ron
Solved
Serial Rule - Automatic
Best answer by HoiAnushB
If you are using Serial rule as “Automatic,” the application will automatically generate the serial number sequentially. You cannot define a Prefix/Suffix/Length for that. As far as I know there is no such basic data to be defined.
Ron
This topic has been closed for comments
Hi
Have you tried below option with Sequence. When you click on ‘Sequence’ there you will get another dialog to add a prefix/suffix?
Hope this helps!
Regards,
Naveena
Naveena,
thank you for your reply.
my question might confuse you. what you suggest, is the serial no manual creation process. i am talking about the settings below. highlighted in red.
Ron
+15If you are using Serial rule as “Automatic,” the application will automatically generate the serial number sequentially. You cannot define a Prefix/Suffix/Length for that. As far as I know there is no such basic data to be defined.
Anushka Bandara - https://www.linkedin.com/in/anushka-bandara-25b8b735/
+19Hi
The capability of Sequencing which Naveen explained to you above, diminishes any requirement for user to have separate prefix suffix and length definitions when using Automatic Serial rule.
As I checked, there is no other ability to do this as you request in the standard system. But I think you can use Sequencing well-enough to generate serials ‘automatically’.
Thank you :)
https://www.linkedin.com/in/vimukthi-mahakumbura-9b2296aa/
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.