For some reason in our non-prod environment, the integration schedules stopped running two days ago and the next run date was set to be 2 days in the future. We have also seen this happen following a shutdown/restart of the server after maintenance. Is there a way to adjust these manually? There is no adjustment in the configuration screens nor does restarting the Monitor Service does fix the issue.
Best answer by roklde
Hi Richard,
besides checking the Integration Monitor Person and Password parameters, you could also check the last ping received from the default Intergration Monitor instance (Screen: Integration Monitor Instances). If nothing of the above helps, you can try to disabled and enable the Schedules and doing a refresh schedules and re-start Integration Monitor in between. Sometimes this can be a bit tricky when the schedule is out-of-sync.
Best regards
Roman
+13Hi
Which FSM version are you using? If it’s an old version, this could happen due to the expiration of the integration monitor person_id expiration in your respective environment. Just search the app param INTEGRATION_MONITOR_PERSON_ID (if it’s null, then it has to be the METRIX person_id) and then check whether the password has been expired under the security tab of the person screen. You may need to give a full cache refresh after changing the expiration date.
Give this workaround a try, if the previous suggession did not work out for you.
+26Hi Richard,
besides checking the Integration Monitor Person and Password parameters, you could also check the last ping received from the default Intergration Monitor instance (Screen: Integration Monitor Instances). If nothing of the above helps, you can try to disabled and enable the Schedules and doing a refresh schedules and re-start Integration Monitor in between. Sometimes this can be a bit tricky when the schedule is out-of-sync.
Best regards
Roman
Hi Roman. Everything with the integration person record was fine and the last ping was more or less current. In the end, I think it was the disable, refresh and restart sequence that got things going again but I still had to wait until the time caught up to the next run time which was several hours. I would have to think that a mechanism similar to the ability to actually set the next run date on the scheduled processes would be helpful as well for the Integration Schedules.
Cheers,
Richard
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
