Hi All, 

I have a question to advise a customer about how to perform a Production Support Form in IFS. Currently, they work with a Product Support Form, this should be integrated in IFS. This PSF contains about 100 different points.

Since i`m only experienced yet in a little Control Plan knowledge, i need your help and advise.

Every part the customer manufactures, will have a separate Shop Order with the amount of 1. So every produced product has its own, unique Shop Order.

This form meets the following Requirements

• Several Serial numbers must be registered (Used (purchase) parts that have a serial number must be tracked/traced and registered and be retrievalble to the manufactured part.)
• A series of control plan steps should be performed --> OK/NOK (control plan)
• (Unique) Measurement results must be registered (Control Plan?)
• Different Operations/work centers have to perform these steps (Assembly/quality)
• Tests must be performed, and the results must be registered.
• Checklists must be checked off

Questions:

• What might be the best setup for this? So that the several steps to perform will follow up (according to the routing operations?), and the serialnumbers, test results and control plan results can be tracked/traced to the correct Shop Order where the used serialnumbers are retrievable and registered.

• How do i set up the serial tracking/control plans/analysis results all in 1 flow?

I would love to hear your ideas and input!

Don`t hesitate to reach out if you have any questions.

Thanks in Advance,

Michiel