Skip to main content
Solved

PDM - Engineering Revision Transfer - Make and purchased (raw)

M
Do Gooder (Partner)
Forum|alt.badge.img+7

Hi,
our customer has the following requirements.

They have 3-Site, for example:
A
B
C

He create an “Engineering Part” with “Provide Code” and “Product Structure”, for example:
“Part Number”  = 1212
“Provide Code” = Make


The next step would be “Engineering Revision Transfer Action”.

The “Part Type” per Site are:
A = Manufactured
B = Purchased (raw)
C = is not needed
 

For Site A with “Part Type” “Manufactured” it does the transfer.

For Site B with “Part Type” “Purchased (raw)”  it does not  the transfer! This is the Error message, I understand that, but this situation exists and I think not only in this company.

 

Is there a way to transfer a “Engineering Part” with “Part Type” manufactured and “Product Structure” as a “Purchased (raw)” Part?

Would appreciate a timely response, thank you in advance for your assistance.

BR,
Milanko

Best answer by MikeCH

@CHJYLK Your example is only possible if you have not inserted an part in the Eng Part Structure (tab "Consists Of"). Otherwise, only the part type "Purchase" is possible for the transfer,

In this situation there are two possibilities:

  1. Change the part type at the 2nd site as described by CHJYLK (but only "Purchased" is possible). Then delete the BOM part in the Inventory Part and then delete the BOM. Then the part type can be changed to "Purchased (Raw)".
     
  2. Do not create the Eng Part on the 2nd site via transfer but via "Create Inventory Part" using a "Purchased (Raw)" part template:

     

 

View original
Did this topic help you find an answer to your question?

4 replies

AanHGTS
Hero (Partner)
Forum|alt.badge.img+12
  • AanHGTS
  • Hero (Partner)
  • 131 replies
  • March 9, 2023

@msimovic No. Purchased (raw), cannot have a Structure or even a Structure header created

Cheers, Aan de Silva - https://www.linkedin.com/in/aandesilva/
MikeCH
1 person likes this
  • MikeCH
    MikeCH
C
Hero (Employee)
Forum|alt.badge.img+5
  • CHJYLK
  • Hero (Employee)
  • 40 replies
  • March 9, 2023

Hi,

Since you are transferring the part to a different site it is allowed. Change the  part type in Engineering Revision Transfers page prior to assigning the part for transfer. 

Since you have already assigned the part for transfer, go to Detail Transfer and cancel the job. Then go to Engineering revision Transfer Actions and set the “PDM Preliminary Rev. Change ” to “Not Changed”.

The part will again be visible in Engineering Revision Transfers page for the site. Change the part type to Purchase (raw) and assign for transfer again. This would allow you to transfer the part as Purchase (raw)

MikeCH
Hero (Employee)
Forum|alt.badge.img+13
  • MikeCH
  • Hero (Employee)
  • 146 replies
  • Answer
  • March 9, 2023

@CHJYLK Your example is only possible if you have not inserted an part in the Eng Part Structure (tab "Consists Of"). Otherwise, only the part type "Purchase" is possible for the transfer,

In this situation there are two possibilities:

  1. Change the part type at the 2nd site as described by CHJYLK (but only "Purchased" is possible). Then delete the BOM part in the Inventory Part and then delete the BOM. Then the part type can be changed to "Purchased (Raw)".
     
  2. Do not create the Eng Part on the 2nd site via transfer but via "Create Inventory Part" using a "Purchased (Raw)" part template:

     

 

C
1 person likes this
  • C
    CHJYLK
B
Do Gooder (Customer)
Forum|alt.badge.img+2
  • bryce-o-rama
  • Do Gooder (Customer)
  • 5 replies
  • May 30, 2023

If an item is a structure parent in Engineering, the component/child can be a phantom and the item can still transfer at Purchased (raw).

We have done that for parts of our design that we cannot manufacture; injection molded parts are a great example where I work:

  • Molded part (Buy)
    • Polycarbonate XYZ123 (Phantom)

The molded part will successfully transfer as Purchased (raw).

Reply


Terms & ConditionsCookie settings

Cookie policy

We use cookies to enhance and personalize your experience. If you accept you agree to our full cookie policy. Learn more about our cookies.

 
Cookie settings