IFS Solutions

Q&A Discussion of IFS Solutions for our IFS Employees, Partners and Customers

27657 Topics

F
Do Gooder (Employee)
FabriceDo Gooder (Employee)
asked in Distribution (CRM, Commerce)

Add new column name in duplicate check rule

Hi,I would like to know if it would be possible to add a new column name in the Duplicate Check Rule. For example to check for duplicate descriptions on the lead.If this needs a modification I would like to know if you think this would be feasible or if it would be too complicated to develop.Thank youFabrice

5
Jonas Feigl
Hero (Employee)
10 months ago
PRODQ
Hero (Customer)
PRODQHero (Customer)
asked in Finance (Financials)

Email Customer Invoices to Multiple Contacts (Cloud)

Does anyone know if it is possible in Cloud to setup emailing invoices (confirmations, pro-formas etc) to multiple contacts, please? I appreciate there are a number of other handles to turn but basically in Apps9 I know if I set up an entry like this in the Comm Method tab of the Customer with abc@company.com; xyz@company.com; 123@company.com in the Value field, customer invoices will be emailed to all three addresses.     So far, all I can glean is you enter your email address here...  … and then pick it up from the List on the Payment/AR Customer Contact section.  But this is only a single contact - not multipleAny thoughts/ideas/suggestions/know-how would be greatly appreciated!   Thanks LInda

1
Ieva Rituma
Superhero (Employee)
4 months ago
Darshana Herath
Hero (Former Employee)
Darshana HerathHero (Former Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS Cloud Print Agent without SSL

[005] 30/05/2023 1:22:40 PM: Starting REST Service...[005] 30/05/2023 1:22:41 PM: SEVERE ERROR during startup. Check configuration.[005] 30/05/2023 1:22:41 PM: Index was outside the bounds of the array.[005] 30/05/2023 1:22:41 PM: State changed: ERROR[005] 30/05/2023 1:22:41 PM: State changed: STOPPED

0
Darshana Herath
Hero (Former Employee)
11 months ago
T
Do Gooder (Partner)
TimBrunoMDo Gooder (Partner)
asked in Warehouse Data Collection (WaDaCo)

WADACO - Start Picking

Hello everyone, Does anyone know which subprocess WADACO - START PICKING takes first when actually starting the pick?For example, I am creating a PickList (in which there is Handling Units and Parts) and the Customer wants to Report all the Parts frist and only then the Handling Units. How can I do this in WADACO? Because sometimes it is starting with Handling Units and the other times it is starting with Parts…. Does anyone know how to solve this issue?

2
T
Do Gooder (Partner)
9 months ago
Franck.G
Sidekick (Employee)
Franck.GSidekick (Employee)
asked in Distribution (CRM, Commerce)

Create new record after

Hello everyone in Apps 10 it was possible to configure the creation of a new line after a field... please confirm if this function is still available in IFS CLOUD…  

2
Franck.G
Sidekick (Employee)
11 months ago
Kanishka Dilana
Superhero (Employee)
Kanishka DilanaSuperhero (Employee)
asked in Buying (Procurement, Demand Planner, ASC, SRM)

Is it possible to change the default Answer for Warnings in Cloud?

I would like to know whether it is possible to change the Default Answer for the Application Warnings in the Cloud solution?For example, all we need is to change the Default Answer from ‘Yes’ to ‘No’ in a Warnings message similar to the one given below,  Same issue was discussed in Community post https://community.ifs.com/framework-experience-infrastructure-cloud-integration-dev-tools-50/warning-message-is-it-possible-to-make-no-button-as-default-in-warning-message-10667?tid=10667&fid=50, but is for IEE.

1
Marcel.Ausan
Superhero (Partner)
5 months ago
J
Sidekick (Customer)
JamesW72Sidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

RECURSIVE CPU - 94%?

Apps 10 - UPD14. Hi All,Quick question, our Test instance is quite slow even though the Db (20gb SGA / PGA) and host machine (ODA Server) is adequately sized for the number of sessions / users - at any one time, there are only around 15 users using it.One thing that I have noticed is in the IFS System Monitoring console, the Recursive CPU is constantly at 94% - ‘Parse’ CPU never gets above 1% and ‘Others’ again never goes over 6%..Any idea why the ‘Recursive CPU’ is so high any SQL I can run to check to see why? Thanks in advance

3
Technical Toby
Superhero (Employee)
5 months ago
T
Do Gooder (Customer)
Tea Man DanDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Experience with 23R1 stability

Hi, we are on 22R1 currently and are deciding whether to update to 22R2 or 23R1.Logically it makes sense to move to the latest, but there are some internal concerns about new release stability.Has anyone installed the latest release without any trouble?Thank you

2
T
Do Gooder (Customer)
10 months ago
S
Sidekick (Customer)
semonSidekick (Customer)
asked in Finance (Financials)

How to setup residual value rate or value in depreciation method

Could someone share knowledge about residual value rate setting for specific depreciation method? We expect different residual value rate based on base value in different depreciation method.

2
S
Sidekick (Customer)
10 months ago
untsrikanth
Sidekick (Customer)
untsrikanthSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Trigger predicates in IFS event actions

Hi All,Is there a way to use the trigger predicates in IFS event actions. We ended up creating too many events and are now in the process of consolidation and cleanup. Our thought is to keep a single event for each table and validate the trigger type in the action, is there any way to do it in IFS Events?Or I need to have 3 different events for Insert, Delete and Update for each table.Any suggestion will be greatful. Regards,Sri

1
NickPorter
Superhero (Customer)
10 months ago
E
Do Gooder (Customer)
Eesha1753Do Gooder (Customer)
asked in Data Migration

adding a logo to IFS Standard report

Hi,Does anyone know how to add a picture to a IFS apps 10 standard Report, do i also need access to the build place to publish my changes on the report? thanks,

3
A
Sidekick (Customer)
4 months ago
V
Do Gooder (Customer)
VALRHONDAVEEDo Gooder (Customer)
asked in Projects Based (Contract/Resource Management, Project Management, Engineering Design & Deliverables)

Project Management Currency Rate

When creating a  Project, the currency rate that applies is based on the company; however, we need transactions to occur based on the Customer’s currency code.  We have entered the pricing for USD rates, but transactions on the Project Transaction screen is still showing as EUR. Is there a field that allows us to change the currency rate so all transactions occur in USD? 

1
J
Hero (Employee)
6 months ago
P
Do Gooder (Partner)
PaengmuangJDo Gooder (Partner)
asked in Finance (Financials)

How can i create manual supplier and math PO receipt with no Prelim status?

How can i create manual supplier on IFS cloud and math PO receipt with no Prelim status?

5
P
Do Gooder (Partner)
8 months ago
LenaicDAVID
Hero (Employee)
LenaicDAVIDHero (Employee)
posted in Service (Touch Apps, MWO, MRO)

Object Measurements linked to Work Task

Hi,Creating this idea on behalf of a customerIFS Cloud 22R2 - Service / EAM solutionWhen Object Measurements are registered from a Work Task or a Work Task Step, either on MWO App or directly on IFS Cloud, the Work Task reference is not recorded against these Object Measurements.This prevents from being able to easily integrate Object Measurements into the work reporting for the Task.Unless creating a CRIM for it.This would be a great enhancement to have this link as part of the standard core solution 

2
LenaicDAVID
Hero (Employee)
8 months ago
F
Sidekick (Partner)
FEKTSIRYSidekick (Partner)
asked in Finance (Financials)

Why i don't have the real cost matched in périodical capitalization like the cost in project monitoring.

Hi all,I have one question,When i do the capitalization of my cost and revenue, i don’t have the same amount when i look at my real cost in monitoring of the project and the real cost capitalised.So i don’t Know what is wrong?So can anyone help me for this? For your information, my project is not finalised.Thanks for your answer. 

7
F
Sidekick (Partner)
6 months ago
E
Do Gooder (Employee)
eric.vivesDo Gooder (Employee)
asked in Distribution (CRM, Commerce)

Can you import data into Cloud?

Hello,Does anyone know if we can import data into IFS? So, say for example, we export a list of contacts and make some changes into an excel spreadsheet, can we import it back into IFS so it updates the fields?Kind regards.

2
R
Do Gooder (Partner)
8 months ago
R
Hero (Customer)
ronhuHero (Customer)
asked in Buying (Procurement, Demand Planner, ASC, SRM)

Customer Owned Management

Community, Would like you to share your experience in Customer Owned product management. Financial AP is facing more and more issues that user put Customer Owned stock, on purchase order, yet buyer never realized, released PO until the supplier invoice is arrived at AP team.any experience on how to control this kind of issue take place again?Thank you.

6
R
Hero (Customer)
10 months ago
D
Do Gooder (Customer)
Dean OCDo Gooder (Customer)
asked in Field Service Management (FSM) & Planning and Scheduling Optimization (PSO)

How to convert an inbound array into a single string?

I am seeking to receive an array from our customer’s system and convert it into a single string that we can add as a note.They are sending the below in the body of their message: "request": {"site_id": "0085","template_id": "1533","cross_reference_id": "RTS-326","po": "RTS-326","priority": "","part_id": ["00DN001","00L8367","01L1646","011545A","01L1647"],"long_description": "Testing scanner order"}When reviewing the transaction logs, I can see that all 5 parts were interpreted in the system but only the first part_id, 00DN001, populates in the notes.<request>  <site_id>0085</site_id>  <template_id>1533</template_id>  <cross_reference_id>RTS-326</cross_reference_id>  <po>RTS-326</po>  <priority>  </priority>  <part_id>00DN001</part_id>  <part_id>00L8367</part_id>  <part_id>01L1646</part_id>  <part_id>011545A</part_id>  <part_id>01L1647</part_id>  <long_descrip

3
D
Do Gooder (Customer)
9 months ago
S
Sidekick (Customer)
sachiniSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

How to find jar files for IFS JAVA Access provider

Hi All,I would like to use IFS JAVA Access provider. But I could found the ifs-fnd-ap.jar & ifs-fnd-common.jar. Can anyone please send me those jar files. Thank You,Sachini

1
dsj
Superhero (Partner)
11 months ago
I
Do Gooder (Partner)
IFRANSDo Gooder (Partner)
asked in Projects Based (Contract/Resource Management, Project Management, Engineering Design & Deliverables)

How can I deliver Project demand without a Customer Order?

I would like to know how to make a delivery to a customer from my project, without using a Customer Order.Thank you for your time.

1
E
Hero (Employee)
6 months ago
lopespetro
Hero (Customer)
lopespetroHero (Customer)
asked in Assets (Asset Management)

Same site for different company

Hi All.is it possible to create the same site ID but in different company?E.g.:Site 02 Company 07Site 02 Company 01I’m getting a message that the site already exists for the company. Br.

3
Mathias Dahl
Superhero (Employee)
8 months ago
Chamaka Wimalarathne
Hero (Partner)
Chamaka WimalarathneHero (Partner)
asked in Insights (Business Reporter and Analysis Models, EOI)

Using multiple page Contexts for a user

I want to have a Custom context for a user group so I created one . And out of that group I want just one person to have a different lead page than other users .Something like below But when I create it as below . Is there a way to give priority to contexts . To use a logic like this …check the context chamaka is in the page , if not use the context pagero ..cant the context to be page oriented ?

2
EntNadeeL
Hero (Partner)
10 months ago
S
Do Gooder (Customer)
StejonatLDo Gooder (Customer)
asked in Field Service Management (FSM) & Planning and Scheduling Optimization (PSO)

How to add workflow condition to screen in Mobile Designer

Hi Guys, I am unable to add a workflow condition script to one of the screens in Mobile Designer.This is for FSM Mobile app. 6.18 I realize that screens with the pencil button as below has the workflow condition field, but screens without the pencil does not. How do I enable, add the workflow condition field to screen in Mobile Designer?    

9
Shneor Cheshin
Superhero (Employee)
11 months ago
J
Do Gooder (Customer)
jnagatiDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

User Permission at the concept and development phase

Hello,We are implemeting IFSCloud.  we’ve defined keyuser to customize it according to the needs of our bussiness. As a security officier, I am wondering which access right should I give to key user knowing that they need to see all transactions made in this phase but not grating access right. Same question for the users of our integrators. Any one has answer to my question . Thank a lot  

3
JJäthing
Hero (Partner)
9 months ago
B
Sidekick (Customer)
Benjamin CharltonSidekick (Customer)
asked in Finance (Financials)

Why are there no items in the Cost Center Id drop-down list?

We are using IFS Cloud version 23R1. On the Manufacturing Labor Class screen, and also on the Manufacturing Labor Classes screen, there is a field called Cost Center Id. See below:  All the values have gone. It used to have options in the drop-down list of available values but the list is empty now. The values we’d like to use are in the system on another screen called Code String Completion. See below: Does anybody know why these codes aren’t showing as options in the Cost Center Id drop down list please?

2
B
Sidekick (Customer)
5 months ago

Badges

Show all badges
Terms & ConditionsCookie settings