- - Knowledge base
Product Updates
Events
Groups
Feedback

Community
Search

Topics started by matt.watters

54 Topics

Recently active

Most views Most replies

matt.wattersSuperhero (Partner)

asked in Document Management (DocMan)

Connect One Object to Multiple Existing Document Revisions

Version 22.1.1Is there any method to connect multiple existing document revisions to one business object at the same time?Example: At the Change Request, using the Attach Existing command, can a User find and select multiple records? Or is this a one-by-one process?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

How to Load Orders and Schedule in APB using Finite Capacity on Manufactured Components

There have been multiple posts in which the logic behind the Sched Capacity on the Inventory Part has been presented and what happens when Finite vs. Always Finite is used.This post is questioning how a user is supposed to load data into the APB when manufactured components are either Finite or Always Finite. Customer has the following product structure:P/N 100 P/N 200 (QPA = 30) P/N 200 is always manufactured in lot sizes of 8 and each shop order takes 1 day (8 hours) to process its lone operation.5-day work week M-F, 8-hour days, 8 AM - 4 PM no breaks.There are (4) shop orders for component p/n 200, and each is scheduled to end on Day1, Day2, Day3, and Day4 respectively. These have been APB Scheduled and saved to the database.I have multiple shop orders for p/n 100 that consist of only one operation.When loading and scheduling only the shop orders for p/n 100 If P/N 200 is set to Always Finite, APB does not schedule the orders for p/n 100. It is in Unscheduled status in APB, with the

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Control Plan Manufacturing Analysis View Serial Numbers

Cloud 22.2.1I have an Analysis for a serial part for a variable type data point. I selected the serial numbers for the analysis. I entered the results for the serial numbers and completed and confirmed the analysis. In the header of the Analysis Result page, when I select ‘View Serial Numbers’ there are no serial numbers listed.Using ‘View Serial Numbers’ in Apps10 EE the assigned serials are still visible.Is this a bug or a new feature?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Error with Inner Min Value in Capability Indices

Cloud 22.2.1.I have a manufacturing control plan data point with:Inner Min = 0.98 Nominal = 1.00 Inner Max = 1.02When I open Capability Indices for this line, I get an error ‘Invalid value for property ‘InnerMin’’.Any thoughts why?

matt.wattersSuperhero (Partner)

asked in Supply Chain

Inventory Part Availability Planning to MRP Part Information page

Cloud 22.1.8In the navigator, the Inventory Part Availability Planning page is positioned under Supply Chain Planning > Part Planning.I find a part number in this page and select the MRP Part Information command button.This takes me to Supply Chain Planning > Part Planning > Inventory Part Availability Planning > MRP Part Information - Top Down. In this page, there is no Expand button in the record selector.When I navigate manually to MRP Part Information - Top Down, this follows the path Supply Chain Planning > Material Requirements Planning > MRP Part Information - Top Down > MRP Part Information - Top Down. In this page, there is an Expand button in the record selector. Why does the MRP Part Information command in the IPAP page not navigate to the MRP Part Information Page that allows use of the Expand button?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Weighted Average Inventory Value updated due to new receipt

Apps10 Upd11.Weighted Average, Cost per Part.I have (1) of part A in stock, inventory value = $1000.I receive (1) of part A into stock, actual cost = $2000.I now have (2) of part A in stock, inventory value = $1500/unit, total of $3000.When the inventory unit value changed from $1000 to $1500, is this revaluation ‘event’ visible anywhere, is there any history of this for someone to see? Or is this just behind the scenes and no record of it is stored?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Documentation on Intraday Planning with Master Scheduling

The latest documentation on Intraday Planning with Master Scheduling reads as:When a part with this setting enabled is master scheduled, the demand and planning time fences are shifted one day earlier. I.e. if you have 0 as demand time fence, current day is considered outside the demand time fence with this setting enabled and within the demand time fence with this setting disabled.This is either written incorrectly or the system is not behaving as designed.Version 22.2.1Observed behavior:With DTF = 0 and Plan Manufacturing Supply on Due Date = NO Run MS 1 Calc on 12/7 DTF = 12/7 (current day = DTF) With DTF = 0 and Plan Manufacturing Supply on Due Date = YES Run MS 1 Calc on 12/7 DTF = 12/6 (current day is inside DTF)

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Intraday Planning - Adjust Shop Orders Need Date to Demand Logic

The latest Cloud documentation for this reads:First the shop orders for the parts with the highest low level is reviewed. Then it continues with the next level, and then the level after that until all levels have been reviewed.The phrase ‘highest low level’ is ambiguous. If my list consist of parts with low levels 2, 3, and 4, which one is the highest, 2 or 4? 2 is the highest looking at it from a structure perspective, while 4 is the highest value.If this is a bottom-up approach, e.g., starting with parts at level 4, then moving up to 3 , then 2 and so on, could this be written simply as being a ‘bottom-up’ method? If it is a top-down approach, then the same applies.

matt.wattersSuperhero (Partner)

asked in Supply Chain

Intraday Planning and Customer Order Dates

Version 22.2.1I have a sales part/inventory part setup for Plan Manufacturing Supply on Due Date.The customer order line Planned Ship Date/Time = 12/30/22 2:00 PM.I do not have a Delivery Route configured for this.The customer order line Planned Due Date = 12/30/22 12:00 AM. I expected this to also be 12/30/22 2:00 PM.Is a Delivery Route required to have the Planned Due Date correspond to the Planned Ship Date/Time?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Operation Subtask Signoff Icon in Card View

Version 22.2.1I have an operation for which no signoffs are required on a subtask. In Card View, though, there are icons that can be misinterpreted that a sign-off is required. Why are these visible?

matt.wattersSuperhero (Partner)

asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Recent Pages in Cloud - what is the logic for arrangement?

Version 22.2.1Looking at the Recent Pages, what determines the arrangement of the pages? In EE, it was logical, left-to-right then top-to bottom.In Cloud, I just moved from Document Revision to Technical Drawing, and my recent pages looks like this.

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

How are Shop Order Estimated Costs for Machine or Labor Calculated in Weighted Average?

Apps10 Upd11Working in a Weighted Average, Cost per Part world.When a shop order is created, how are the estimates determined for buckets other than 110 (estimated material)?What is used to determine the Estimated Level and Accumulated Cost for buckets such as 200, 201, 300, 321, 322, 400, and 421?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Link between Shop Order Priority Category and Inventory Part

I have a customer in Apps9 that is seeing the following behavior.When a shop order is created from a shop order requisition for some parts, the Priority Category on the shop order is systematically being assigned a value.How would this be possible?It is not possible on the Inventory Part to define a default Priority Category. These parts are not using any Shop Order Auto Processing types. There are no custom actions performing the insert of this value.They are using history logging of Insert and Update of PRIORITY_CATEGORY in SHOP_ORD_TAB, but looking at a shop order for which the Priority Category has a value, this history log record for insert shows as:

matt.wattersSuperhero (Partner)

asked in Supply Chain

How is rounding precision determined in Customer Sales Quantity?

Apps10 UPD12For a customer order line for which the Sales UoM = kg and the Customer ‘s UoM = lb, what controls the number of decimal places displayed for the Customer Sales Qty? In the order lines below, why is the Customer Sales Qty showing up to 25 decimal places? Is there any way possible to limit this to 1 decimal place?The Qty Calc Rounding for the inventory part connected to the sales part = 1.In the Sales Part Cross Reference, the Sales UoM = kg, the Conv Factor = 0.45359, the Invert Conv Factor = 1, and the Customer’s UoM = lb.

matt.wattersSuperhero (Partner)

asked in Document Management (DocMan)

Cloud DocMan without Aurena Agent

New to doing DocMan in a Cloud environment.What would a user be unable to perform with the Aurena Agent not installed, i.e. can most functionality (create, edit, check-in, view) be done without it?Asking as I am expecting a customer to not have the address info required for running the MSI installation, and unable to configure any User Settings.

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Partial Production Schedule Receipts and Handling Unit Structures

Apps10 Update15 AurenaIt appears that using a packing instruction consisting of more than one level with production schedules does not work the same with partial receipts as it does with shop orders. Each partial receipt against a production schedule creates a HU on the lowest level, as expected, but a new top level HU is also created for each receipt transaction.Example:Two-level packing instruction consists of (10) BOX1 on (1) PALLET1. I can pack a maximum of (2) part 123 in BOX1. I have a Production Schedule for (20) part 123. I report (8) complete. HU (2226) is created for PALLET1 with (2) HUs (2227, 2228) created for BOX1. All as expected. I then report (8) more complete. A second HU (2229) is created for PALLET1 with (2) new HUs (2230, 2231) created for BOX1.I expected the (2) new HU for the BOX1, but I did not expect the second HU for the PALLET1. I would expect some method to re-use the first HU of PALLET1, as with shop orders, but I have not found a way to do this.Is this ev

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Missing Operation Number in Production Schedule Material History

Apps10 Update15I have a production schedule part with four routing operations (10, 20, 30, 40).This part is connected to a production line for which I have defined a Progress Point with a Last Operation No = 20.I report production of (5) at the progress point.I report a partial scrap of (2) at the progress point.In Production Schedule Material History, though, I do not see operation 20 in the Operation No column for the Scrap Product WIP or the Issue Material material history actions.Should operation 20 be listed for these? If not, when would one ever see a value in this field?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Shop Order Scrap of Serial Part and As-Built Structures #2

Looking for methods anyone has used to handle the following.Apps10 update8On a Shop Order I am manufacturing a serial-tracked, lot-tracked, multi-level tracked part through (4) operations 10, 20, 30, 40. Lot size = 5. Serial numbers 1-5 and Lot/Batch AAA have been reserved for this shop order.My Site is set to auto-build the tracked structures.All component material is issued, all of this material is serial and lot-tracked also. The Shop Order As-Built Structure is completed before I start production.At Operation 20 I want to scrap (1) part, and this part has been physically identified in the shop as Serial No. 1.After performing a Shop Order Scrap for a quantity of (1), I delete Serial No. 1 from the list of reserved serials, which alters the parent-child relations in the system-generated Shop Order As-Built structures for the remaining serial numbers. Note: I deleted Serial No. 1 from the list of reserved serials because during the Report Scrap process on the shop order, I cannot des

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Cannot Over Report an Operation with Planned Scrap Quantity Reserved

Apps10 Update 8 IEEIn multi-level tracking, when a component is reserved in a quantity that includes its planned scrap quantity, this over-reservation is not accounted for when attempting to over-report an operation or over-receive in production. User receives an error message that there are not enough reservations for the tracked part and it must be reserved before it is issued. Setup:Shop Order:Part No. = M-987Lot Tracking = Order BasedLot Quantity Rule = One Lot Per Production OrderMulti-Level Tracking = YESLot Size = 40Shop Order Materials:Component Part No. = P-987 (Purchased, Lot-Tracked, Multi-Level Tracked)Quantity Per Assembly = 1Component Scrap = 4Qty Required = 44Qty Required Excl Plan Scrap = 40Reserve/Issue Method = Reserve and BackflushReserve/Issue Planned Scrap = YESIssue Overreported Qty = YESOperation No = 10Shop Order Operations:Operation 10 Op Qty = 40Inventory Situation:Available Inventory of P-987 = 100, Lot/Batch = AAAProcess the Shop Order:Manually reserve all

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Shop Order Specific Control Plan Tools

Apps10 Update 8When a Control Plan is associated with a Shop Order, I can add shop order-specific data points for situations like one-off testing that I do not want in the standard Control Plan. I can also add Tools in the Shop Order > Control Plan > Tools tab. I would like to connect these new Tools to the shop order-specific data points, but there is no method available.If I can add the tools, why am I not able to connect them to any data point? What does one gain by adding tools to a shop order control plan if they cannot be used?

matt.wattersSuperhero (Partner)

asked in Document Management (DocMan)

Document Attachment Visible at all Employee Certificates

Apps10 Upd8 IEEWith the current setup of the Object Connection for Employee Qualifications > Certificates (attachment LU = PersLicenseProfile), when a document is connected to one certificate record for Employee A, the document is ‘visible’ as an attachment at other certificate records for the same employee.Is there a Method available to restrict the visibility only to the Certificate record to which the document was explicitly attached?Object Connection setup:Certificate record where the attachment was made for document 1001832 (certificate TA 0718-17)The other Certificate record for the same Employee/Group ID (certificate TA 1291-15)The Object Key for the document-object connection:

matt.wattersSuperhero (Partner)

asked in Document Management (DocMan)

Editable setting in Object Connection Transformations

I am looking for a better explanation of the settings for ‘Editable’ in Object Connection Transformations than what is provided in the F1 Help for Service Name = DocReferenceObject. Some examples would be beneficial also.Scenario: I have a Source LU ‘A’ and a Target LU ‘B’. I connect a document revision to source LU ‘A’.For each of the three possible values for ‘Editable’ (Source, Target, None):What am I able to do with documents at the Source, i.e., connect additional documents, detach documents, etc., and what effect does this have at the Target? What am I not able to do with documents at the Source? What am I able to do with documents at the Target, and what effect does this have at the Source? What am I not able to do with documents at the Target?My reason for asking this is the documentation provided on this attribute is provided below, with my additions entered in parentheses.None - This indicates that the inherited object connection is read only and no new connections can be mad

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Employee Labor Overhead Cost Incurred for Setup Time but not Run Time

Apps 10 Update 8 EE. Part is serialized and set to Cost per Serial. Site/Company is configured to use Employee Salary Information for the Labor Rate and the Labor Overhead is using the OH Rate (150%) defined on the Cost Source.One shop floor employee working on one operation on one shop order.When setup time is clocked via the SFWB, Labor Overhead cost is incurred. When run time is clocked via the SFWB, Labor Overhead cost is not incurred.Any quick ideas why no overhead is incurred on run time?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Shop Order Scrap of Serial Part and As-Built Structures

Looking for methods anyone has used to handle the following:Apps10 update10Manufacturing a serial-tracked, lot-tracked, multi-level tracked part through (4) operations. Lot size = 5, manufacturing serials 1-5.Site is set to auto-build the tracked structures.All component material is issued, all of which is serial and lot-tracked also.At op #2, I want to scrap serial #1.After performing a scrap for a quantity of (1) (cannot designate the serial I am scrapping, i.e., not going to receive), I delete serial #1 from the list of reserved serials, which alters the relations in the as-built structures.What has been your experience in best practice for getting the as-builts correct after scrapping a serial part? Do not auto-build ahead of time? Wait until receipt to build them and alter them?

matt.wattersSuperhero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Work Center/Labor Class Capacity Calculation Default End Date

Apps10, UPD12.When manually performing ‘Calculate Work Center Resource Capacity’ or ‘Calculate Labor Capacity for Manufacturing’, the value for Calculation to Date defaults to 180 days from system date.Is it possible to change this default of 180 days?I know this can be established if I were to configure this as a scheduled task.

1
2
3

Page 2 / 3

Badges

provenkaghas earned the badge 25th Topic
RvdBoshas earned the badge 5th Topic
Dannyhas earned the badge 25th Topic
gatustisonhas earned the badge 1st Reply
jaz.sidhuhas earned the badge 1st Topic

Show all badges

Powered by Gainsight

Terms & Conditions Cookie settings

Sign up

Already have an account? Login

Login as an IFS Employee

or

Username (Do not use your email as a username.) *

Email Address (Use your work email address.) *

Name *

Company *

Account Number

(Private)

Only you and moderators can see this information

Job Title *

Member Type *

IFS Employee IFS Partner IFS Customer Just Visiting

Products Used

(Private)

Only you and moderators can see this information

IFS Cloud IFS Applications FSM PSO Maintenix Fleet Planner Alliance FieldCentrix assyst MWM Other

Country

Password *

I accept the terms & conditions

loginBox.register.email_repeat

Login to the community

No account yet? Create an account

Login as an IFS Employee

or

Username or Email

Password

Remember me

Forgot password?

Enter your username or e-mail address. We'll send you an e-mail with instructions to reset your password.

Username or e-mail

Back to overview

Scanning file for viruses.

Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.

OK

This file cannot be downloaded

Sorry, our virus scanner detected that this file isn't safe to download.

OK