Finance (Financials)

4308 Topics

JamesW72Sidekick (Customer)

Ageing Buckets query

Apps 10 UPD14.It has been noticed that some of our companies have 6 Ageing Buckets and some companies have 4 and some have none. Does anybody know why this would be the case and any idea how we can make all companies have the default 6 Ageing Bucket.It seems it is not possible just to add them in the client but in the BUCKETS_API method, it seems it is possible to add..

2 months ago

djsteigerDo Gooder (Customer)

asked in Finance (Financials)

Credit Card Interface - Mastercard Bin Numbers

We use the Credit Card interface to send credit card transactions to our payment processor, PayPal.Mastercard has added more bin numbers for their cards, so we need to update Credit Card Verification basic data to accept the new bin numbers. Mastercard used to only be 51-55, but now they also have numbers from 2221 - 2720.The way the basic data is currently structured, we have to enter a line for every number in a range and it’s corresponding valid length.Is there a way to enter bin prefixes as a range of numbers like they’re defined from the credit card company instead of keying in 500 new lines?

2 months ago

WiaPasanDSidekick (Partner)

asked in Finance (Financials)

ACH/WIRE - Electronic Payment Address is not enabled as a RMB option in Customer Master

Hello,I have connected a user-defined payment format (with the option ‘Generate Trace Information’ enabled) to a payment method ‘ACH/WIRE’ to process customer ACH/WIRE payments. However, after I connected the Payment Method to the customer, the RMB option to add an Electronic Payment Address was disabled. Please refer to the below screenshots:Payment Format:Payment Method:Payment Institute and Payment Methods per Institute:The Customer, when trying to connect an Electronic Payment Address, is as follows:Kindly request advice on how to enable the Electronic Payment Address.Thanks, and Best regards,Pasan

2 months ago

AbdessamadDo Gooder (Partner)

asked in Finance (Financials)

Update fixed assets previous depreciation

Hello, Is there a way to update a fixed asset previous years depreciations ? We imported a list of fixed assets but there was an error in the previous years depreciations import. So we went to know if it’s possible through an external file. Best regards.

2 months ago

LakshmiMDSidekick (Partner)

asked in Finance (Financials)

How to allocate a budget automatically to a cost code

2 months ago

clwilkDo Gooder (Employee)

asked in Finance (Financials)

Changing the Default Display Order of 'Posting Proposal' Attachments

Hi ,In Posting Proposal, if there is one attachment with the actual invoice and another attachment with specifications, is there a way to change the order in which attachment images are displayed?Best Regards,Chalana

2 months ago

NPGIFSJOMAIISidekick (Customer)

asked in Finance (Financials)

BPA workflow for external invoices / posting proposal

We receive all our supplier invoices in the external supplier invoices view. In this view, today we spend a lot of time correcting any incorrect invoices that have not been successfully created. The same applies to invoices that have reached the posting proposal. Here, too, we pay a lot of time administrating things that normal system parameters does not cover. Does anyone have experience using BPA workflow in these views? Of course one part is to work with internal processes and our suppliers. But sometimes the default settings are not enough. Please share your experience!

2 months ago

kacperifsSidekick (Customer)

asked in Finance (Financials)

Preview of invoices - IFS CLOUD

Hi, Is it possible to view the invoices that have been posted or authorized by me without access to the invoices that have been posted or authorized by other users?I want to see the invoices that belong to me.

2 months ago

Isuru Thilina

asked in Finance (Financials)

ACCOUNT_GROUP_DESC error when calling GLBalanceAnalysisHandling.svc/BalPipeLineFunc

When calling GLBalanceAnalysisHandling.svc/BalPipeLineFunc via postman receive below database error is received. What am i missing here? ACCOUNT_GROUP_DESC is not a parameter in BalPipeLineFunc./int/ifsapplications/projection/v1/GLBalanceAnalysisHandling.svc/BalPipeLineFunc(Company='10',CompList=null,CompName=null,CompGroupList=null,BalanceSetId=null,IncludeHoldTable=false,SimulationVoucher=IfsApp.GLBalanceAnalysisHandling.SimulationVoucherEnum'Normal',MultiCompany=false,Attribute=null,AttribValue=null,ShowAllBalances=false,WhereStmnt=null,NavStatus='FALSE',RepMapStartYearPeriod=null,RepMapYearPeriod=null,RepMapYear=null,RepMapPeriod=null,ExcludePeriods=null,PeriodMappingExists=null,FromYear=2023,ToYear=2023,FromPeriod=2,ToPeriod=2,FromYearPeriod=null,ToYearPeriod=null){ "error": { "code": "DATABASE_ERROR", "message": "Database error occurred. Contact administrator.", "details": [ { "code": 904, "message": "ORA-00904: \"A

2 months ago

AbdessamadDo Gooder (Partner)

asked in Finance (Financials)

Rollback partial payment - Offset proposal

Hello I have a question about partial payment rollback for both customers and suppliers. It creates a SUPOA or a CUPOA on the company, The problem is those payments on account cannot be used for an offset proposal afterwards. How to handle this case ? Best regards

2 months ago

ShaazSidekick (Employee)

asked in Finance (Financials)

21R2 Error occurred while updating the PO Reference in the Manual Supplier Invoice Only for German Language

Hello Experts,Please assist me in resolving this issue for a 21R2 customer.A customer is experiencing difficulty updating a PO Reference in the Manual Supplier Invoice Window.This problem occurs only for the German language; all other languages' PO reference updates proceed normally.When updating and saving the PO reference, the user receives a error for a specific language (German).I've also attached a document from the case.Please share your knowledge of this Error Message. {“error when serializing content”.}

2 months ago

DavidSmileSidekick (Customer)

asked in Finance (Financials)

List of new posting types in IFS10

Hi, Guys,Could anyone point me to an official IFS document which have a list of newly added posting types in IFS10 (upgraded from IFS 9) ? It’ll be super helpful for auditing… Thank you in advance!Best,David Cheng

3 months ago

HuguesGSidekick (Partner)

asked in Finance (Financials)

Currency rate on customer invoice in preliminary status

Can you manually change the rate on a customer invoice (CUSTORDDEB or COADVDEB)? It does not look like it is possible. My question is why the “Currency rate” field is greyed out when the invoice is in Preliminary status? Is there a config somewhere that is blocking that field? Is that standard way in IFS 10? It seems like you need to create a currency rate correction (does not work for COADVDEB) and it creates 2 additionnel invoices, one to reverse the original invoice and a second one to recorded a new invoice with the correct rate. Is there a easier way than that?

3 months ago

Shiham SaheelDo Gooder (Partner)

asked in Finance (Financials)

Non-Supplier Payments unable to be executed via supplier payment orders

Hi,The system is firing the below error message when I try to acknowledge the payment order which consists of a non-supplier payment. As per the error message, it is requesting to use the mixed payment screen instead. However as per the IFS online documentation, the ‘automatic supplier payment on file’ activity diagram shows that non-supplier payments can be done using payment orders. It doesn’t mention anything about using mixed payment screen for non-supplier payments.The IFS version I am using is Apps 10 upd 15. Appreciate if anyone could share your thoughts on this and advise how I should go about with processing non-supplier payments. Thank you!

3 months ago

ZSBDo Gooder (Customer)

asked in Finance (Financials)

Coordinator-based weighted discount lobby

I need help about of create a “Coordinator-based weighted discount lobby”. Is there anyone who did something like this? I need to group the data and calculate it. how can i write this code?

3 months ago

SMcLeesSidekick (Customer)

asked in Finance (Financials)

Change order - automatic matching

Why won’t a new price automatically pull through if a change order has been processed to update a new price? For example, invoice is in query because it is short of £500 - the purchase requistioner updates the PO to reflect new price, but to clear the invoice we have to manually go to the posting proposal and ‘pull in’ PO/receipts again, despite having a scheduled job to run to check for new receipts?

3 months ago

DERYNGVE

asked in Finance (Financials)

Trigger Automatic account matching when closing a user group per period

Hi, Would it be possible, in IFS APP10, when closing a user group per period to:Trigger automatic matchning in accounts for automatic matching Create a report (for example supplier ledger open items) and send to user and/or be save to a defined folder?How would you go about setting this up?

3 months ago

FatRarDo Gooder (Partner)

asked in Finance (Financials)

How to void a reconciled supplier check

Hello I’m using App 9 and I need to void a supplier check which is in cashed state. Also this check is reconciled. Can I void the check?

3 months ago

GDFMNICHOLSDo Gooder (Customer)

asked in Finance (Financials)

Billing Fee Questions

We have a third party customer (global_name) that has requested that we send all invoices to their processing firm and take out a 3% fee off of every invoice (including taxes). I am struggling to come up with a solution and have a few questions regarding this situation and billing.1. I know there are a lot of complex settings we have not used yet regarding billing with fees and adjustments. I was looking into Billing Configurable Financials. We don't have one set up, but was wondering if I could utilize this functionality for what I am trying to accomplish or something like this?2. I am not seeing a method to calculate a fee in a way that includes taxes. We use a Vertex API Integration to make a call and stick it onto special charges. Is there a way to calculate a fee that would include special charges, really just a way to calculate a fee based on the invoice total plus taxes?3. Is there a way to put a fee against a total invoice, instead of on each individual line?4. Is there a way t

3 months ago

ronhuHero (Customer)

asked in Finance (Financials)

Supplier Invoice Error - Divisor is equal to Zero

Community, We have below error, which is not application error, it’s a DB error. when we check the costing tab, we found a line with all zero amount.in the purchase order line body, i can see the line 4 is in zero cost.my question is, how we could avoid this error? when doing receipt matching, we can simply skip this line receipt?Thank you.

3 months ago

SilvesterDo Gooder (Partner)

asked in Finance (Financials)

Sending multiple invoices

Hello,How is it possible to add multiple invoices in 1 E-mail in IFS10? From a customer Invoice it's possible to select the option “Send invoice...”, but in the Customer Invoices tab this option doesn't exist. It's desirable to have multiple original PDF files of the invoices in 1 E-mail, which can be send at the same time, not 1 e-mail per customer invoice.

3 months ago

pratik.b.shahSidekick (Partner)

asked in Finance (Financials)

URGP payments with ISO20022 - How to do this set-up?

Does anyone has idea, how to do the below set-up from scratch. Where I can find it? Thanks & RegardsPratik Shah

3 months ago

bytsophanHero (Partner)

asked in Finance (Financials)

Voucher gets not posted into Internal ledger

Hi ExpertsI am having issue with the customers IL and GL setup. as you can see below you can see an example where vouchers from GL gets not posted into IL. As you can see in the picture above, Voucher Type S and E does not get posted or even created for internal ledger. in the below printscreen the vouchers are setted up for all the ledgers. there is also no vouchers excluded the authority levelis there anything else i can check?

3 months ago

Furkan ZenginSuperhero (Partner)

asked in Finance (Financials)

Tax No Country Code in JPK File (KodKrajuNadaniaTIN)

Dear community members,I am generating a JPK file without problem. However, country code is not assigned for some transactions. Country of the supplier is TR. Does anybody aware if there should be an additional setup, checkbox or similar to get country code?Thanks

3 months ago

pratik.b.shahSidekick (Partner)

asked in Finance (Financials)

Advance Supplier Invoice Issue when two different tax code

Can some help me to understand why I cannot create advance invoice on manual supplier invoice screen with multiple tax code i.e. when two different tax code are used. Check the error in the screenshot below. How to solve this?

3 months ago

Page 14 / 173

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded