Hello I have an object / asset , 2021-33 that was activated in October 2021. In November 2021, a manual entry was entered to adjust the value of the asset. After this, it stopped depreciating. When we run a depreciation proposal, we get this message in the log: I would appreciate any help on how to correct this and get the object to depreciate again. Thank you.
Hello We have US assets that will required MACRS depreciation that includes a 168(k) Allowance % of 50%. For example, we have this asset with a 168(k) allowance % of 50% and a depreciable % of 200. Is there a depreciation method from the existing ones below that would be appropriate to use ? Or if there is none, how could one be set up? When I look at some of these methods I do not see a field where I can specify a 168(k) allowance %. Would appreciate any input and assistance on this.
Hello. We set up the project below, with only 1 activity, where planned revenue is 100K and planned cost is 70K so that planned margin is 30%. Actual cost is 85K all of which was booked in one period. We set the financial project to a Project Type of Capitalize Rev/Exp and Revenue Recognition Method of POC Revenue First. When we run revenue recognition, it recognizes revenue of 100K and cost of only 70K even if actual cost is 85K. In this overbudget scenario, we would like to recognize revenue of 100K (ie. the planned revenue) and cost of 85K (ie. the actual revenue). However, in an underbudget scenario (let’s assume planned revenue is 100K, planned cost is 70K and actual cost is 65K), we would like the cost recognized to be 65K (ie. actual cost) and revenue recognized to be 92,857.14 (ie. the revenue needed so that the planned margin of 30% is achieved). I would appreciate any thoughts on how we could achieve this. The IFS version we are using is Apps 9 U13. Is there a particular
Hello. When I try to create a depreciation proposal, I get the error below. Would anyone kindly advise what this error means? Would be much appreciated.
Hello Currently, we have some automatic MPL vouchers hitting a non-ledger account (account 1270 Manual WIP) monthly which should be hitting a ledger account (account 1271 WIP) . So we do a manual external voucher to move these transactions to the ledger account . We would like to cut down on this extra manual entry. Is it possible to write some sort of script in IFS that automatically creates and posts this external voucher to move those transactions that hit the non-ledger account to the ledger account?
Hello. Our company will be acquired and so we will need to do a hard close in the middle of our fiscal year. Then start again under the new ownership. So for example, our 2022 fiscal year is from October 2021 to September 2022 . Acquisition will finalize at the end of March 2022, so at this point we would like to have a hard close since it is under the old ownership (and as such, we would like to be able to run financial reports etc. for the period/ time span under old ownership) where income items are closed to retained earnings etc. Then we would like to move all ending balances to the beginning of April 2022 then start anew under the new ownership. Is this possible to do in IFS? I would appreciate any advice on how to go about this. Thank you.
Hello I would usually run the report below which is a 12 month income statement. However there is a an account that doesn’t show, account 8060, which is a new account that was created to replace account 8055. There has been activity in account 8060 so it should be a part of the income statement. Would anyone have an idea of why the account is not showing in the report and how to fix? Any assistance would be much appreciated.
Hello. Kindly refer to the attached file, which is the Object Transactions Analysis window populated. I recently imported acquisition values and accumulated depreciations for 24 assets (rows 2-49 of the attached) via external file upload. For the acquisition transactions, I assigned an object transaction ID of 1 and for accumulated depreciation transactions, I assigned an object transaction ID of 2. I then activated object 2016-027, ran and posted depreciation on it then rolled back (rows 50-51). The object transaction ID for the depreciation posting and the rollback is 938 and 939 respectively. I then activated object 2016-041A, then ran and posted depreciation for it and object 2016-027 (rows 52-53). The object transaction IDs for these are 1145 and 1146. I am trying to understand why there is such a large jump in the transaction object ID. Why is it that the first depreciation and rollback (rows 50-51) jumped all the way to object transaction IDs 938 and 939. Then the next depreci
Hello. Our fiscal year 2022 starts in October 2021. At the end of December, there will be a change of owners / acquisition so we would like to do a year close to clear the income statement (Period 1 to Period 3 FY2022) to retained earnings. At the start of January 2022 (Period 4 FY2022), we will manually upload balances under this new ownership. Then at at then of September 2022 (Period 12 FY2022), will do a year close to clear the income statement to retained. So essentially, we would like to do close to mark the ownership change/acquisition then a another close to end the year. As such, we will have two year closings (ie. two year closing periods in FY2022). Is this possible? I would appreciate any thoughts on this or other alternatives. Thank you.
Hello. In Parent Consolidation, there is as an option when right clicking called Start Currency Balance Adjustment. Would anyone be so kind as to explain what this does? Thank you.
Hello I have these two errors in revenue recognition: When I check the project, B25857 for example, the estimated revenue matches in the Project and Financial Project. But when I recalculate revenue recognition, I get an error that revenue cannot be recognized. Is there something that I am missing? I would appreciate any assistance on this.
Hello. I posted a depreciation proposal with posting date 4/3/2021 . But when I try to rollback the posted depreciation, I get the below error: I am not sure why I need to rollback any transactions for this object since the depreciation posting was the most recent transaction. All other transactions for this object were posted before the depreciation. Any help or guidance on this would be much appreciated. Thank you.
Hello. I created the asset below and imported an acquisition value of $2,409.15 and an accumulated depreciation of $2,179.69, so it’s remaining value is $229.46 . It has 8 months of life remaining. Is there a depreciation method that is already in IFS that can be used to depreciate the remaining value over the remaining 8 months of its life? And if so, how can it be set up in the Books tab of the object? Any assistance would be much appreciated.
When I run the Supplier Ledger Age Analysis Report, is there a way to exclude the following Series IDs: SUCHECK, SUPOA . If not, would it be possible to modify the report so that it does not show amounts under these series IDs? Any assistance would be much appreciated.
Hello.Under System Info of the Import Object window, there is ObjectTransactionDate and EventDate (highlighted below). Does anyone know what the difference between these are? I would appreciate any assistance. Thank you.
Hello. I have an external file template to upload objects: We recently created 3 custom fields in the Object window, highlighted below. Now I would like to add these to the external file template, but I am unsure on how to do so. I would appreciate any assistance on this. Thank you.
Hello.I have the following template to upload an object. I used this template to upload this object, UPLOADOBJ6 : The template has fields for Acquisition Value and Acquisition Value in Parallel Currency, which I filled out. My understanding is that this same template would also upload these values to the two highlighted fields below under Import Object. However, it did not go through when I did the upload. Does anyone know have an idea of what might be causing this? Any help would be much appreciated. Thank you.
When I try to post imported object transactions, I receive the following error. Does anyone have an idea of what might be causing this? Would appreciate any help. Thank you.
Hello. I am testing an upload template to upload Depreciation Data that, if done manually, would have been entered into the Import Object window of an object. I am getting an error that says that an FA_OBJECT_TRANS_VALUE_TYPE is required. Could someone advise on what this is or what field in the IFS window it refers to? Any assistance would be much appreciated. Thank you.
Hello. When a PO is created and a no part order line is entered, is it possible to assign a FA object to this line so that when it is received into the system, the FA object is activated and the acquisition value is set? I would appreciate assistance/thoughts on this. Thank you.
Hello, I am hoping someone can assist or shed light on an issue I am struggling with: I created an FA Object then successfully set its acquisition value ($1,000) through a PO and subsequent PO receipt. I then activated the object. I then increased its value by $10 via a supplier invoice but with no PO. After posting the invoice, I activated this additional investment via the Add Investment - Progress window. Now I would like to increase its value by $100, but this time via a PO receipt. So I entered a PO, assigned it the same FA Object ID, then received, ran transfers and updated the GL. However, when looking at my Distribution and Manufacturing Postings Analysis, I get this error: “You have specified an object with wrong status.” This suggests that the object shouldn’t be in a non Active state for the postings to go through. So I tried to deactivate the object, but get an error message: “There are active transactions that needs to be rolled back before deactivating the object.” This
Hello. I have a PO with 5 of the same items. These were all received at once. In the posting information section of the posting proposal of the supplier invoice, is it possible to have 5 lines where each line matches to a receipt quantity of 1? Or should the 5 items be received separately for this to be possible? I would appreciate any assistance/thoughts on this. thanky ou
Hello. I would appreciate guidance on how to upload fixed asset objects. Is this possible and is there a template for this? Thank you.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
