Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

This will include the questions related to Foundation1 and Technology, Infrastructure, Cloud, Integration, Developer Tools, Data and IOT, and Platform.

  • 7,013 Topics
  • 21,929 Replies

7013 Topics

F
Superhero (Partner)
Furkan ZenginSuperhero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Invoice No field on Manual Supplier Invoice for auto numbering

Hi community,I defined a new invoice type and series ID for supplier. Then I assigned the new invoice type to supplier as default invoice type for manual invoice. When I create a new invoice for the supplier, invoice type and series ID are populated from supplier basic data however invoice no field is not read only as expected. See my steps below Define a new series ID Select series ID and click invoice number series button. Enter valid from, start value, end value and next value in detail window. Define a new supplier invoice type and select previously created invoice series ID for definite invoice series ID. Go to supplier master and change default invoice type for Manual to newly created invoice type.  Create a new supplier invoice. See that invoice type and series ID info is populated from supplier master. However, invoice no field is not read only as expected. If you manually assign the invoice type for any supplier then the field is read only. Can someone test in reference enviro

4
F
Superhero (Partner)
10 months ago
Z
Do Gooder (Customer)
ZAEDOMNYADo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Exporting file to shared drive using IFS Connect

I was wondering if someone has been able export a file to a shared drive using IFS connect. I have created a routing address with file sender that is linked to a new connector sender.In that connector sender I have specified shared drive as the output directory and granted SYSTEM read and write permission to that drive but I am still not able to write to that drive. I keep getting Error while sending data... Caused by: java.io.IOException: Could not create directory or the file exists and is not a directory   

4
Mathias Dahl
Superhero (Employee)
3 months ago
R
Sidekick (Former Employee)
Roshanga KulathungaSidekick (Former Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Streams are not pushed when sending as send to colleague option

In app10 IEE client, when sending a straems message as 'Send to Colleague', the receiver does not get the notification. Other options like using an event action and subscriptions works fine. Is there a binary patch or does this prevent becaus eof a setting

0
R
Sidekick (Former Employee)
2 years ago
E
Sidekick (Employee)
Eugene WagerSidekick (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Print Agent Debugger Option Available? #GSDTECH#

PROBLEM:   intermittent errors with customer’s Print AgentRECREATED IN CORE:  No.  Only occurs at customer’s siteRECREATED IN CUSTOMER’S ENVIRONMENT:  yes, but at unpredictable intervals (hence the request for additional debugging help)BUSINESS IMPACT:  intermittent need for repeating print job requests by IFS users and associated inconvenience to usersIMPORTANCE:  2-High Case ID: G2225593-B REQUEST FROM R&D:  Is it possible to provide a “debugger version” of Print Agent to customers which might display additional information upon print job errors?

7
Shanaka Tennakoon
Hero (Employee)
2 years ago
R
Superhero (Partner)
RutJWhalenSuperhero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Issue with CUSTOMER_ORDER_IVC_REP

Missing RELEASE_NO field from CUSTOMER_ORDER_IVC_REP.  How can I add RELEASE_NO  I haven’t found an API call where I can grab this information. Thanks John

1
R
Superhero (Partner)
3 years ago
A
Do Gooder (Customer)
adam.grzymislawskiDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Customer registration history

Hello, is there any way to track who and when registered new customer / customer contact? Is there any way to track changes in customer address data? I can’t find it in History Log settings.BRAdam

2
Wimali Athulathmudali
Hero (Employee)
2 years ago
eqbstal
Superhero (Partner)
eqbstalSuperhero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Using $count on projection set in Workflow (BPA)

For each set of a projection we can request something like:[YourServer]/v1/CurrencyRatesHandling.svc/CurrencyRateSetThis will give a list of all the currency rate sets. Great. One of the query parameters is $count (see [YourServer]main/ifsapplications/projection/v1/CurrencyRatesHandling.svc/$openapi?V3#tag/CurrencyRateSet).How do I use this on the URL as mentioned?This is my first step to understand how to implement retrieving the number of rows in a set retrieved via something like the following:It comes down to knowing in the end, are there zero or more rows. Based upon the count I can perform another step in the process.

5
K
Hero (Employee)
1 month ago
M
Do Gooder (Customer)
mkellythegreatDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Oracle Accounts with AAD Authentication

Hello,We’ve recently enable AAD authentication for our test environment in IFS 10 UPD9. Is it possible to use Oracle accounts in IFS still with AAD enabled? If so, how do we authenticate the Oracle accounts with SSO?

7
M
Do Gooder (Customer)
1 year ago
P
Sidekick (Employee)
PIrelandSidekick (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Cloud User Guide - Latest?

Hello,I’m trying to see if there is a User Guide for IFS 23R1 or any of the modern versions for that matter.  I’ve found the Cloud - Aurena User Guide but it is dated December 2020 – Early Access and its screenshot are old.  I also have the PPT named  How Presentation_UX23R1 (I’ll be darned if I know what the use of the word How is supposed to mean), which talks about 23R1 Enhancements.Do we have a single document (PPT) with everything included that is dated currently? I also understand that the use of the Aurena designation is passé.  Should the current documentation mention Aurena at all?Thank you.Patrick

3
P
Sidekick (Employee)
7 months ago
M
Sidekick (Customer)
MarkMrSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

SUPPLY_ORDER_ANALYSIS_TAB Table and supply_order_analysis_api.generate_tree() Procedure

Hi Everyone, As part of some BI work we need to be able to track an order as it flows through Supply Chain Order Analysis within the oracle database. (E.g. we want to track an order based on the original customer order number, even when the order gets a new order number). We have been looking at the Supply Chain Order Analysis screen and the related SUPPLY_ORDER_ANALYSIS_TAB table in the Oracle database. This table seems to contain the data that we are looking for, however the SUPPLY_ORDER_ANALYSIS_TAB table gets regenerated each time a user visits the “Supply Chain Order Analysis” screen via the supply_order_analysis_api.generate_tree() procedure and will not contain an order unless someone visits that screen for looking for that order. Does anyone know how we could recreate the logic for the supply_order_analysis_api.generate_tree() procedure? It has to be in the database somewhere but I just don’t know where to look. Thanks, Mark Mruss

6
H
Hero (Customer)
1 year ago
P
Do Gooder
PheonixDo Gooder
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Barcode/QR codes are not printed after applying UPD18 in APP10

After applying UPD18 Barcode/QR codes are not visible in any report. Even though  data is coming to the field, report is not converting those data to Barcode/QR code. I have tried to print several different reports with barcodes and QR codes and all of those reports had the same problem. I have tried to print the same report with same layout in an environment with UPD16. In there all the Barcode/QR codes are displayed without any issues. Is this a known issue ? Is there a fix or a workaround for this issue ? 

6
Shanaka Tennakoon
Hero (Employee)
5 months ago
P
Do Gooder (Customer)
pacharryDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

No result set in XML with larger size PDF reports

Hi,We are running on IFS 9 and using report rules to send emails in order to have control of the the PDF file name. However, much of the time the rule fails with an error similar to:Rule ID=30 ORA-6502:ERROR Evaluating Expression=''[@CUSTOMER_ORDER_CONF_REP/BILL_ADDR_1]'' result_key=1499formatter_properties=LocaleCountryUS Upon further investigation, the rules are failing on larger sized documents (order lines can number into the hundreds of lines).  I downloaded the report XML and see that the file contains no information other than the report translation information, which would explain the errors reported in the reporting rule log.The reporting rules work fine with smaller printouts where the report data is present in the XML.Are there any settings that control this behavior?Thank you.Best regards,Pakorn

1
ChanakaAmarasekara
Hero (Employee)
2 years ago
A
Do Gooder
ankurgoyal800Do Gooder
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Find out view name in IFS Evergreen

How could we find out the related View in IFS Evergreen Projection ? 

1
Kelum Pradeep Kumara
Superhero (Employee)
1 year ago
I
Do Gooder (Employee)
iam0kruDo Gooder (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS Embedded Workflow

Relating to how Camunda is implemented within IFS

8
I
Do Gooder (Employee)
1 year ago
Link
Superhero (Customer)
LinkSuperhero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

EDI - how do add package units in xml

Hi everybody,I’ve downloaded the xml file for despatch advise from “IFS Interface Browser” and it contains the package units. But if I export or send a despach advise from the screen “Shipment” it doesn’t contain the marked xml tags. Why not? Is there any settings?  

8
Link
Superhero (Customer)
6 months ago
Simo Ollanketo
Do Gooder (Employee)
Simo OllanketoDo Gooder (Employee)
posted in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Lobby Page Parameters - Multiple values in one Parameter (IFS Cloud)

Hello.I’ve seen some conversations/questions in Community about possibility to add multiple values in one lobby page parameter.Here, how I solved this thing in my configuration, SQL WHERE in Datasource Designer is a bit different than what I found.--------------------------------------------------ATTRIBUTE like DECODE(instr(',' || '$PARAMETER$' || ',', ',' || ATTRIBUTE || ','),0,nvl('$PARAMETER$','%'),'%')replace ATTRIBUTE with your attribute/column in datasource.replace PARAMETER with your lobby page parameter name.--------------------------------------------------For example if you need to have Purchase Group as parameter in lobby, defining datasource like this will allow user to add multiple values in one parameter. Values in parameter field to be separated with comma, and no spaces in between.STAT_GRP like DECODE(instr(',' || '$Purchase Group$' || ',', ',' || STAT_GRP || ','),0,nvl('$Purchase Group$','%'),'%')If NULL’s wanted to be included, just add OR STAT_GRP IS NULL .----------

0
Simo Ollanketo
Do Gooder (Employee)
3 months ago
O
Sidekick (Customer)
OrangeCloudSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

correction Invoice Remove Button in Tax Lines

We use Correction invoice to credit back Sales Tax only.In IFS8, we use to ‘Remove’ these lines  using ‘Remove button in ‘Tax Lines’ Right Mouse Button on line of PR Correction Invoice.In IFS10 ‘Remove’ button is not highlighted. Looks like IFS change few things in this area… any ideas on how to get this ‘Remove’ button back so we can remove these lines and return only tax,In following scenario, when remove button is not available, the tax amount and gross amount both becomes  zero and it effects postings too. Thanks

2
O
Sidekick (Customer)
3 years ago
A
Sidekick
AdarshSidekick
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Where i found partial new projection configuration in aurena?

Hi All,   I was started created new projection configuration in Aurena.    In middle of steps , i go back to new other one page then i back to create projection configuraiton.     Not found on my details of New projection configuraiton.     When i was create again same projection name ..then error shown that ‘Projection entity already configuraiton’.I am search ,but unable to find .Kindly assist us.

5
EntNadeeL
Hero (Partner)
3 years ago
S
Do Gooder
shewaDo Gooder
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Filter in custom attribute LOV 23R1

Hi,Is it possible to add a WHERE clause (filter) to custom attributes in 23R1?Thank you. 

1
Rukmal Fernando
Hero (Employee)
9 months ago
T
Hero (Partner)
TheoBHero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

What is a projection?

Hello everyone, I would like to know exactly what a projection is? How does it work with oData services? Thanks in advance!

1
N
Hero (Employee)
1 year ago
ProThushA
Do Gooder (Partner)
ProThushADo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Video on Lobby does not work

Video Element, does not work properly. Is there any specific set up?   

1
NickPorter
Superhero (Customer)
2 years ago
M
Do Gooder (Customer)
mess1153Do Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Global Company Lobbies

I created a lobby for our Accounts Receivable team to show customers balance and past due amounts. The list is drillable so they can go right to the customer invoices. The issue that I’m having is that you can change the company in the lobby, but when you drill into the table it goes to the global company and not the company selected in the lobby. Is there any way to have it drill to the correct company?

1
BGPROBYOUNG
Do Gooder (Customer)
2 months ago
H
Hero (Partner)
Hans AndersenHero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Create page footing in crystal report

Hi all,I report designer, the invoice page footing is extracted into rows and columns. Is there an easy way to do something similar in Crystal Report?

3
H
Hero (Partner)
2 years ago
G
Do Gooder
gongcuihuaDo Gooder
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Open the page and give CCombobox a default value. How to implement it

dear all,           I want to give CCombobox a default value when I open the page. How can I implement it? I tried to assign it a value under the load event, but the page doesn't show up correctly 

3
G
Do Gooder
2 years ago
R
Superhero (Partner)
RutJWhalenSuperhero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Mail Recipient opens Chrome window instead of mail message

For some of our users when they click Mail Recipient a Chrome explorer window opens instead of the Outlook New Message. Has anyone else had this and if so, how did your resolve this issue.Regards John

2
Mathias Dahl
Superhero (Employee)
3 years ago

Badges

Show all badges
Terms & ConditionsCookie settings