Hi @Dario Flandia Checking at the code it looks like it not allowed to edit or delete output type PURCHASE. Maybe for some historical or upgrade reason, I don’t know for sure. But just try and create another output type but don’t call it PURCHASE it should work better.
Hi @EqeMariaV Yes you can do that in a couple of ways.Easiest is if you are using IFSAPP10 or CLOUD then you can use the GS1 barcode functionality for that. Check links below how to setup a configuration to use GS1 barcodes. You will need to find a so called AI Code for your different values, if you cannot find any that is directly connected to PO you can use any code you like, for example the 90-99 codes are free to use or find some other as long as the datatype and length fits the values you will be using here. If you are an older version or don’t want to use GS1 for some reason, it could also be possible if you either make sure that there is Carriage Return character between each item in the barcode or have another character as a delimiter between the values in the barcode and then setup your scanning device to replace the delimiter character with a Carriage Return character when scanning/return the value from the barcode. This carriage return will force a save between each value in
Hi @Sarah Neuman Ah ok, now I get what you are asking about, forgive the confusion here since you posted this in the WADACO (warehouse data collection) section so both me and @Link thought you were actually talking about a wadaco process that had some barcode printing functionality.But what you are asking about is the general Print Inventory Part Barcode functionality that existed long before wadaco was built and that we in wadaco can use to scan the stock keys from in many processes. This question should have been entered in the Supply Chain section since this functionality belongs to Supply Chain and Inventory rather then to wadaco.I’m not an expert on that report, but as I remember location is not part of its content at all, probably due to some old historic design decision I would guess. You can see exactly what information can be gather from the barcode if you open the Inventory Part Barcode Analysis page.I think this report is mostly to gather the part information like serial/lot
Hi @TsuJenifW I don’t think that is possible, the process have been setup so you will always have to enter at least one of the quantities while the rest can be calculated from that one.
Which process are you talking about, since neither Move Part nor Move Handling Unit have any label printing in IFS core, so not sure what we are talking about here even, is it a customization perhaps.
To me this don’t sound like a WADACO issue since we have no special WADACO reports, its the same reports that exist in the regular client so the same problem should then exist in the regular client also.
Hi, I cant find the security_wadaco_mobile_user.ins file. where would i find it? It depends on which Application version and update are you using, Apps10 or Cloud.It have been renamed 1 or 2 times, alternative names are:POST_Wadaco_security_wadaco_mobile_user.sqlsecurity_wadaco_mobile_user.ins
Hi @mfrejik It depends on what you want to do exactly, some things can be setup like you want in the configuration, like the things you describe could be configured that way depending on which process it is and if that data exist as items in the process. If some items are missing they can be added as customizations to the process. And if its a new process needed it can also be added as customization. This is something that customers do all the time, either with help from IFS consulting or our partners or even by themselves if they have the competence to understand and write IFS server code. Wadaco processes are more or less just plsql server code so there is no need to do any changes in the app for example to add some new logic or items to a process or add a new process. See additional links for more information, including long presentations how to change configuration settings and explanations how wadaco and the processes are built up.
@Dario Zani Otherwise stated, it would make sense we loop in someone from R&D team involved in printers setup. Do you know one of them ? At the meantime, could you explain what you’ve already planned to support, so as we have clear ideas ? Sorry I don’t have any names.I think the idea for future is to maybe add a new printer data item to processes that have print functionality that would have a LOV similar to the printer dropdown list you can select from the regular print dialog. If that is possible. So that is why I’m asking if those mobile printers can be seen here or not.
Maybe @rukflk should answer this.
Please note that supporting the mobile/wifi-printer might a totally different thing then what we are planning to support in the future. We don’t have access to any wifi-printers here, but maybe you or your customer to try out such a printer in the general IEE/Aurena web client and print any report and see if you can choose that printer from the print dialog or not? If you cannot see the wifi-printer or use it there I would guess it will not be accessible from wadaco either since we are using the basic ifs printing framework and we trigger the printing from the server side.
Hi @EntChitrL You need to upgrade to latest update to fix that one.
Hi @Christian CordiusI think you might have a customization done in this process that makes it try and do all these moves in one step so thats why it feels strange to me that it works so, since that is not the core functionality for this process.I noticed you have customized data item C_NEW_WDR_NO so I'm guessing there might have been other customizations to this process also.I think you have that customization just because you wanted to have this functionality you describe: "A session is created per stock move after the execution is confirmed, but before the execution of the flow happens, the flow goes through all lines on the location and makes the movements afterward." So my first guess its this customization that now takes long time so it timeouts due to that. So who ever did this customization might have to look into that code and see if any thing can be done to increase the performance so it will not timeout, or the alternative is to run this in the background but then the user w
Hi @mfrejik First of all, if you want to use GS1 solution in wadaco you need to move up one of the GS1 barcode data items to before the item you want to fetch from the barcode and turn off its Use Fixed Value setting so it can be scanned.Then you need to make sure the item(s) you want to get from the barcode have been setup to have Use Automatic Values set as Fixed and correct GS1 Application Identifier. This is necessary to setup the code to parse the barcode string to find your GS1 elements inside it. This is also mentioned in the online documentation for wadaco in 2 places, plus its mentioned in the help text for GS1 Application Identifier:GS1 barcodes:The GS1 barcode data items are disabled by default. To enable the GS1 functionality the GS1_BARCODE data item must be put before the data item(s) it should identify and Use Fixed Value should be set to Never. In order to display the scanned GS1 value in the information table of the scanning client, Hide Line must be set to Never. The
In IFS cloudIs it possible to export all configuration in bulk? Or is it only possible configuration by configuration using the export/import buttons. No bulk, only configuration by configuration.
Also, do you have an idea on how to configure the scanner so it’s possible to move all records from one location to another in an efficient way? Thanks! No not much you can do in the scanner. What you are looking for is to create new or customized process that will do all that in one session. And if that takes a long time to execute the execute in background option could be used to avoid waiting for the execution to finish so it will not cause a timeout in the scanner.
Hi @Christian Cordius I’m a bit confused now, as I remember this process only executes one stock move per session with this configuration so I can’t understand how it would do 65 for one session. Does this process have a customization somehow so it can do multiple stock moves at the same time, since that is not how the core process works as I remember. What you describes is more or how it would have worked if you were using an internal loop, which you are not using apparently.Plus 65 stock moves would create some transaction history posts also I would guess, that could take some time.So does this timeout happen when the execution is suppose to happen then, since that was not clear to me here?Yeah I would recommend to clean up the wadaco session tables with the background job 'Remove Data Capture Sessions' regularly if you have a large number of sessions. Your 659.269 sessions record is like 20-40 times records in the session line table, which is a lot and can affect the performance.Not
Hi @Christian Cordius Hmm your have configured it in way I don’t think I have seen before. You are not using internal loop from what I can see, so each session is executed separately I guess. So when does this time out happen, is it during execution or is it between some items?You can see some hints if you check the Data Collection Session client but it will only show performance issues between certain items, if the execution takes time it will not be clearly seen there.Since you have not taken an update for a while you say and it worked previously maybe this is performance issue due to increasing large number of records in certain tables.2 things I could think of if you are running the background job that will cleanup the wadaco session tables from time to time? It is often customers forget about that and then the increased volume of old records can start slowing down wadaco generally.Also since this is move part process that access the inventory part in stock data source, it could ge
Hi and thanks for your explanations! We are in 22R2 SU2 and encounter the same error with IFS Scan it V23.2.798. Do you know if and how we can retrieve the .apk file of previous version for IFS Scan it? Thanks ! Yes, that same issue exist for all the old cloud tracks if you have taken the latest app version and not upgraded to the latest service update. The issue is fixed in service update4 for 22.2 and update 11 for 22.1.I guess Dinuka have not come back yet with more information, but I think there was issues with giving out an old version of the app as I understood it, so the recommended way is either to upgrade to the latest service update or request an Out of Band release (hotfix) on top of your current version to fix this issue. You will have to send a ticket to RnD through Support for the Out of Band release, it should be a very small fix that should be easily installed in your environments.
Hej Sara,Sorry my knowledge about the Touch Apps server is zero, I mainly work with wadaco itself. So is this mostly happening when running the Transport Task process or can it happen for other processes also?Since I don’t think the transport task process usually have much performance issues what I know about. The From Location No LOV from your picture should have very small number of possible records I would guess so that LOV should not have any performance issue either. Your examples points to some sync issue between the client and the server I would guess.Which app are they using here? It looks like it is the IFS Aurena Scan It 10, you know there is another android app that is older and more stable, IFS Apps 10 Scan It.It requires IFS account manager to be installed and used to login which is the only downside with that app compared the to Aurena one, but its more stable and have been around since the beginning, while the Aurena app is still very new have some issues and limitation
Ah its the recent issue that have been mentioned in this forum, see comments here:
1) Are there any released configurations (Data Capture Configuration) that also are enabled for the company/site your are running? 2) Can you see any processes outside the mobile app, like directly from the aurena client (warehouse data collection page)? If you can, you have at least some released configurations for the site you are using. So you issue is perhaps only with the mobile app.3) if you can't see anything even in the aurena client, it could a couple of other things, like there is perhaps a wadaco menu created for that site/company your using but no configurations or processes have been added to it yet. It could also be security/grant issue that the user is not granted to the processes that have been released. It could also be that you have tried to add some user access on the configuration that might not be setup correctly.You can find more tips on how to configure wadaco here:https://community.ifs.com/warehouse-data-collection-wadaco-252/wadaco-configuration-guide-video-149
https://community.ifs.com/announcements-notifications-280/minimum-supported-ifs-application-core-versions-for-scanit-cloud-v23-2-798-0-32611
Hi @sara19 I don’t know much about the Touch App Server, but as I remember a year ago I think the TAS team where investigating some similar issues for some customers, I don’t know what those resulted in. But from a ScanIt mobile app and wadaco perspective I can say that client and server code are very sensitive to timeouts between the server and client if there is like a 30-60 seconds delay then they could become out of sync and I guess errors like that could happen. Was there a performance issue for certain process around certain items in the process or when it was suppose to be executed/confirmed? Then it could be performance issue that causes the timeout. You could for example look at the data capture session client for a session that this happens to and look if there is some delay happening inside that session, you cant really see the delay if it happens during the execution phase in there.You can try and run the exact same process from the IEE client or the Aurena web client to s
Hi,Both these processes prints the inventory part barcode report which is a pure stock record barcode for most of the stock record keys, it don’t have any additional information. If you want to source_ref1 or other items part of the barcode you have to create a new customized barcode, maybe by using the GS1 standard if you want to have several values including both stock keys and source_ref1 in one barcode/QRcode.About the error, I’m guessing this is after you have scanned inventory part barcode so it will use those values for the stock keys that have been setup to use automatic value. You could try and turn off some of them like for configuration id to see what happens or check what values was used in the data capture session client (since some of them might be hidden in scanning client).You could check the barcode used here and see what values we will fetch from it by looking at it in Inventory Part Barcode analysis page.The error could be misleading and maybe it is one of the other
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
