Products (Manufacturing, Products, Engineering)

2576 Topics

DIDILKDo Gooder (Employee)

asked in Products (Manufacturing, Products, Engineering)

RSPO (Roundtable on Sustainability & Palm Oil) Audit Functionality

Hi,Does IFS Apps10 and/or IFS Cloud 21RX supports functionality to maintain RSPO status for customers in manufacturing industry? Or are there any extensions support this?Does the functionality supports a mass balance of sustainable, mixed and non- sustainable sourced palm oils? Thanks!

2 years ago

AanHGTSHero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Rerun Erroneous Distribution and Manufacturing Postings not fixing the issue even after setup the Posting Cost Groups

My shop order variance postings are driven by Posting Cost Groups. I have couple of transaction with Erroneous Postings. This happened due to the Cost Buckets were not connected to Posting Cost Groups initially. But later connect Cost Buckets with Posting Cost Groups. Now new postings have no issues.I ran, “Rerun Erroneous Distribution and Manufacturing Postings”, but the previous errors were not resolved. Do I have to perform any other activity to get the Erroneous Postings fixed in the above scenario?

2 years ago

Dinidu UdanaHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Shop Order Availability window – Only show Shortages checkbox

Pre- requisites:Product structure with routing Component part with ‘availability check’ and ‘Shortage notification’ ON Scenario:System will have a Shop order due on future date in released/Planned status confirmed Purchase is already available due date is prior to the SO need date. Planning alert per site is executed No Availability problems were detected with ‘Material availability check In the shop order availability window> Only show shortages check box is checked for the above created Shop order. Still the component part is shown as a shortage In the inventory Part availability planning window. open supply is indicated.Why the component part is shown as a shortage on shop order availability window?

2 years ago

hmccabeSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Undo Material Issue on Shop Order in Bulk

Is there a way to unissue many serial numbers from a shop order at one time instead of individually?

2 years ago

hmccabeSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Shop Order Error Inventory Part in Stock object does not exist

A serial was received on a shop order and shows in Inventory Part in Stock. When we try to unreceive it from the shop order, we are getting the error message “The inventory part in stock object does not exist”. Does anyone know the cause of this error message and how we can correct it?

2 years ago

EntNananNSidekick (Partner)

asked in Products (Manufacturing, Products, Engineering)

Activity Based Costing

Hi,Is there any document showing the process of Activity Based Costing in app-9/10? It will be appreciated, if someone shares the document. Regards-Nahin

2 years ago

ntaylorSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Shop Order WIP on Closed Orders

Hi all,I currently have an issue that was highlighted on a report where some very old orders (some back as far as 2012) are fully closed and reported however have an outstanding WIP value. Shop Order - Detail Shop Order Costs As the outwork was fully completed, the order received and the product sold there is nothing I seem to be able to do in relation to clearing this WIP value.Hopefully some of you clever people have an idea on how I might proceed to dealing with this?RegardsNathan

2 years ago

ig_Do Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

Handling of Basic Data Translation IFS 9 - Add new Logical Unit

Hi Community, we are currently getting more into translations and are checking the possibilities in the system and the best approach to handle our needs.We are also working with ‘Basic Data Translation’ but are missing some logical units in there. Is there a way to add Logical Units (not Component) ourselves? Or do I have to request this from our IFS consultant and do a full package installation routine? The Logical Units exist in the system, but are not available in this form. We are using IFS Apps 9 UPD16 Thanks

2 years ago

ronhuHero (Customer)

asked in Products (Manufacturing, Products, Engineering)

Enable Print Handling unit (Contents) Label

Hi, Community, We ticked the checkbox on below box in Package InstructionPrint Handling Unit Label Print Handling Unit Content Labelthen we are using “Receive into Arrival, and Putaway” for purchase part receiving case. but when we do the goods receiving, system do the packing and created the HU, at this moment, we would expect the HU label or HU content label will be printed as our setup does in Package Instruction, but unfortunately, it is not. what we missed? kindly advise. Thank you.

2 years ago

Shani FernandoHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

How to Remove a Recipe Structure?

Hi All,Is there any way to remove a recipe structure?(Not phase out/ replace)

2 years ago

Shani FernandoHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Unable to remove a branch of a DOP Order | Receiving Error:ORA-01476: divisor is equal to zero

Hi Community,I'm receiving the following error while trying to remove a branch (level 1) from a TOP Level DOP Order.(RMB on DOP Order ID 2 Line -> Remove Specific Branch(es))Environment: APP10 Regional TEST LKP Level 1 DOP Order is in cancelled state. After further analyzing, I noticed that the subsidiary DOP Orders are also cancelled.1. Any idea what might cause the above mentioned oracle error when removing the mentioned branch?Noticed that the Due Date of this DOP Order is in the past and the demand source is not mentioned in the DOP Header.2. How to find the demand source when it is not mentioned under the Demand Tab of the DOP Header?Thank you in advance.-----------------------------------------------------------------------------Not sure whether this is a bug in Core. I followed functional flow (but demand created via a customer order), and created the following DOP Header with the same TOP Level Part. Then cancelled the level 1 DOP order and tried to remove the level 1 branch

2 years ago

ronhuHero (Customer)

asked in Products (Manufacturing, Products, Engineering)

ABBYY interface - PDF Transfer

Community, We are building a interface to SFTP supplier invoice in XML format and processed by IFS API. Mean time, PDF supplier invoice will send to IFS as well. it needs to be an attachment in the manual supplier invoice window. my question is, how to make PDF as an attachment happen? need to config document management? if so, how to config the document management? Thank you.

2 years ago

jrauhSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

SO Release Message Default Structure not effective

Release SO get message that default structure revision is not effective on started date of 10/7/2021 (us format), Inventory Part is active, recipe structure is Buildable with revision date of 1/1/2021 (us date), Inventory Revision tab has product status as Not In Effect with effective date of 1/1/2021 (us date). We loaded the data around the same time and I have some parts that show Product Status as In Effect and some that do not, can’t figure out what is causing this. All structures and routings are buildable.

2 years ago

Devni PanduwawalaHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Setting decimal places in IEE

How to set decimal places from the IEE Client?

2 years ago

Dinidu UdanaHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

run full SQL queries directly from application

Is there any way to run full SQL queries directly from application ?

2 years ago

jamiewhiteSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Resource Analysis Icon Meanings

Hiusing IFS apps 10 and have been playing around with the Resource structures and resource analysis to replicate actual resource constraints.however there is an icon on the resource structure that I do not know the meaning to (below highlighted in red) can anyone help? Also can anyone explain the difference 1) Schedule capacity, 2) Adjusted capacity and 3) utilization capacity on the resource analysis graph? kind regardsJamie

2 years ago

RpauleySidekick

asked in Products (Manufacturing, Products, Engineering)

Combining Columns in Data Source View

Good Afternoon, I was wondering if their was a way to combine the two CASE When SQL’s i have below into one view so my lobby element would show 3 columns (Records Counted, To Be Counted, New Record) The new Record column i am trying to add is parts Recieved this year, Thank you for any and all help it is greatly appreciated (CASE WHEN LAST_COUNT_DATE >trunc(to_date( '#START_OF_THIS_YEAR#', 'YYYY-MM-DD-HH24:MI:SS' )) THEN 'Records Counted' ELSE 'Records To Be Counted' END) (CASE WHEN RECEIPT_DATE > trunc(to_date( '#START_OF_THIS_YEAR#', 'YYYY-MM-DD-HH24:MI:SS' )) THEN 'New Record' ELSE 'Needs To Be Counted' END)

2 years ago

jamiewhiteSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Difference between Company and Site

Hi, i am using Apps 10 and wanted to know what the difference between Company and Site and how if effects CRP?COMPANY SITE regardsJamie

2 years ago

Ravindu PereraHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Invalid Table Name error when 'Show All Reservable Parts' checkbox is ticked in Manual Reservation Shop Order screen - when there are custom fields in ShopMaterialAllocUtil

Hi, in our customer’s APPS10 environment; 1. Go to an Assembly Shop Order with custom fields defined in ShopMaterialAllocUtil (Under manuak resevatuons detail > RMB> Custom fields)2. Now RMb on on line? Manual Reservations3. Check 'Show all reservable parts' checkbox4. You get an oracle error saying"invalid table nameFailed executing query (ORA-00903: invalid table name)"At the same time, while the aboce check box is checkedRMB on the detail tab> Custom Objects> Fields> OverviewYou get another error saying;"---------------------------IFS Applications---------------------------The view for this page and logical unit do not match. It is not possible to add a Custom Field to this page---------------------------[OK]---------------------------" Is there a fix for this issue?

2 years ago

Ravindu PereraHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

'Include sublevel' tick is automatically checked eventhough automatic disassembly is selected level wise in MRO interim order structure

Hi, MRO customers have highlighted a situation in MRO interim order structure; when you try to perform automatic disassembly level by level via the tree navigator the ‘include sublevel’ checkbox is automatically checked. You can obviously uncheck this prior to performing the disassembly, however the customers’ argument is that when you want to perform disassembly level by level this checkbox shouldn’t be automatically checked, unlike when you’re trying to perform the disassembly via the RMB option in the header. Will this functionality be changed?

2 years ago

Ravindu PereraHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Disconnected ROs not showing in MRO manual pegging after migration from APPS8 to APP10

Hi, For MRO customers who have migrated from APPS8 to APP10 there’s an issue where disconnected repair orders are not shown under manual pegging. I.e. these orders have been disconnected within the APPS8 environment prior to data migration. Is there a fix available for the issue?

2 years ago

PIrelandSidekick (Employee)

asked in Products (Manufacturing, Products, Engineering)

Help! AURENA- Using Engineering Part Navigator with a Parent with many children

There is a significant lack of functionality in the use of the Engineering Part Navigator in Aurena, I’m looking for help from anyone who can give me some ideas on how to manage this.I have a parts list that is single level of 150 parts or 500 parts or, even, a 1000 parts. My objective is to establish Parent/Child relationships within this single level list of parts to, well, establish multi-level BoMs that are needed to build the ship. Imagine trying to do this! We could use the navigator where we put it into Edit mode and cut and paste. Remember, there is NO ability to filter in the Engineering Part Navigator. Go find, say, PN=123 Find Number ABC. (we’re using find no, too, because there are many parts where PN=123. It is the 125th part on the list and I want to cut it and paste it under the 50th item on the list. Now, to get to this child part to cut it, you have to scroll (Show More), 5 times to get to see the part to “cut” in and then you have to scroll again to get to the

2 years ago

ronhuHero (Customer)

asked in Products (Manufacturing, Products, Engineering)

cost the plate time spent in shop floor

Community, in floor stock, we have an expensive part in our Bipolar Plate Production , financial would like to track this part not only the material cost, but also the time spent in the shop floor. my first thought is to create an operation without material, milestone, user report the hours on this operation, then financial cost this hours accordingly (labor class or W/C). would that be possible? any other good solution to handle this? Thank you.

2 years ago

RoanyNFSidekick

asked in Products (Manufacturing, Products, Engineering)

When I print shop order reports with attached documents in pdf, It doesn't print. I just receive that report but the document not.

I want to print shop order with their documents attached but when i print it doesn’t print. somebody know what happen or another way to print it.

2 years ago

Elath De SilvaHero (Employee)

asked in Products (Manufacturing, Products, Engineering)

Manufacturing clocking's is calculated on the wrong date

When an employee works overnight labor clocking's within clocking on day 1 and out clocking on day 2 is 'calculated' on day 2. This causes a mfg. diff. on day 1. Furthermore, duration of the labor clocking is calculated to 0.Could you advice any known workaround available?

2 years ago

Page 67 / 104

Products (Manufacturing, Products, Engineering)

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded