Warehouse Data Collection (WaDaCo)

This will include questions related to WaDaCo.

  • 302 Topics
  • 1,052 Replies

302 Topics

TsuJenifW
Sidekick (Partner)
TsuJenifWSidekick (Partner)
asked in Warehouse Data Collection (WaDaCo)

WaDaCo Register Full PO Arrival

If I have a PO with Multiple Lines, In the WaDaCo Configurations is it possible set up a Capture Configuration ID to receive all the lines at once to an Arrival Location?  I am attempting however cannot get past the system asking for “Inventory Quantity to Receive”.

1
D
Hero (Employee)
1 year ago
GISANCAR
Sidekick (Customer)
GISANCARSidekick (Customer)
asked in Warehouse Data Collection (WaDaCo)

WADACO - split barcode field

Is it possible to split a scanned barcode field into multiple input fields in IFS.I can’t figure out how to split the barcode in Warehouse Data Collection or if it is possible or not.We have labels, from an external system, where the barcode contains Shop order + Relase no + sequence no. For example ‘670303-1-1’. Separation character ‘-’.Right now we scan part number, and then select the correct shop order from a list in the scanner. It would be much more efficient if we could scan the barcode with the shoporder/release/sequence no.I also have a scenario where a QR code could be scanned that contains all fields from the label, with a separating character. It would be very useful to be able to split the information instead of scanning multiple different barcodes. 

1
D
Hero (Employee)
2 years ago
P
Do Gooder
pvan4100Do Gooder
asked in Warehouse Data Collection (WaDaCo)

IFS Partnered Warehouse Application with OFFLINE Capabilities

Is there any IFS Partnered Warehouse Management Application that supports OFFLINE Capabilities?

1
ROVECH
Sidekick (Partner)
1 year ago
F
Sidekick (Partner)
First EmployeeSidekick (Partner)
asked in Warehouse Data Collection (WaDaCo)

Move_part_In_Receipt

Hi, after doing Register arrival, we would like to use Wa Da Co to move the parts from the arrival location to a picking location. During register arrival, the operator prints the barcode label and attaches it to the part. Next, we want to have as less actions as possible using WaDaCo. Preferably only 2: we scan the barcode attached to the part, and enter the ‘to location’. However, it seems that the barcode does not include the Source Ref 1, which is needed for the receipt. Is there a solution for that? If I enter the source ref 1 manually, I keep getting the error “Configuration id * does not exist in the context of the entered data and this processs”. I don’t have any configuraiton ID’s involved?

1
D
Hero (Employee)
1 year ago
Dinidu Udana
Hero (Employee)
Dinidu UdanaHero (Employee)
asked in Warehouse Data Collection (WaDaCo)

When WADACO set auto pick is it possible to skip the automatically displayed data?

Data Collection Configuration set UNQUE_LINE_ID List of Values=Auto Pick.Create Shop Order and Shop Order Pick List.Report Picking of Part Shop Order Pick List from WADACO.Because Data Collection Configuration set UNQUE_LINE_ID List of Values=Auto Pick.The picking item shows automatically.Can we skip the item to next picking item?For example we want pick Q-HW instead of Q-CPU.

1
Bhanuka Ranaweera
Hero (Employee)
1 year ago
F
Do Gooder (Customer)
FionaBrownDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

Wadaco process - Move HU question

We move HUs from location GO to location LS using the Wadaco process Move_Handling_Unit. At the moment our operators do a visual check and sign the HU label to say its been matched with what’s on their HU.Is it possible to add a step in the process where the user has to scan the finished goods barcode then scan the HU label to make sure they match up? Scan HU label, scan FG barcode and check that EAN matches, if it does match move to To Location screen if it doesn’t throw up an error. Thanks, Fiona 

1
Jakob Bjorklund
Do Gooder (Employee)
1 year ago
S
Do Gooder
Simon PertinDo Gooder
asked in Warehouse Data Collection (WaDaCo)

Security issue for ScanIt app

Hello,I’m working on Wadaco implementation with my client using the ScanIt app. They made a internal audit to analyse the APK, and they pointed 2 security problems :application send personal information on the network application send informations about installed application on the networkIs it possible to clarify what kind of information are sended and is there a solution for that ?

1
James Ashmore
Hero (Employee)
1 year ago
A
Do Gooder (Employee)
Anthony DDo Gooder (Employee)
asked in Warehouse Data Collection (WaDaCo)

WADACO issue part on Work Order using Pick List

Hi all, We want to use WaDaCo to issue part on Work Orders with Pick List. We don’t see any WaDaCo process which handle this transaction. To issue part on Work Order in WaDaCo there are only transactions for manual issue and unplanned issue but no transaction with pick list. Moreover we have seen in product documentation that transaction manual issue for Work Order doesn’t work with pick list.So my question is : does there is a way to issue part on Word Orders with Pick List using WaDaCo ?Thanks for your Help

1
D
Hero (Employee)
7 months ago
K
Do Gooder (Partner)
KalleshDo Gooder (Partner)
asked in Warehouse Data Collection (WaDaCo)

Is it possible to use scanner (barcode) functionality to issue material against work order

Is it possible to scan the the barcode and issue material against the work order using WaDaCo functionality in Aurena and Apps 10

1
D
Hero (Employee)
1 year ago
ctaylor56
Hero (Partner)
ctaylor56Hero (Partner)
asked in Warehouse Data Collection (WaDaCo)

Scan It - Android 11

Can someone tell me if IFS Scan It (Aurena Native App for IFS Cloud) is compatible with Android 11 OS? Thanks,  Curtis Taylor

1
E
Do Gooder (Customer)
1 year ago
K
Do Gooder (Customer)
kjronoDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

FS Scan It 8 & 9 removed from Google play store

Hi we can’t get IFS Scan It 8 & 9 app downloaded from Google play store anymore. Is it possible to get it back?

1
D
Hero (Employee)
1 year ago
mfrejik
Sidekick (Customer)
mfrejikSidekick (Customer)
asked in Warehouse Data Collection (WaDaCo)

Create Custom WaDaCo Configurations (Apps 10)

Is there a way to create custom WaDaCo configurations from scratch in Apps 10?  For example, I want to make one where you scan the part # & lot # and the feedback is the quantity,  availability control id & description. There are a lot more things we would like to do with WaDaCo, but don’t have ways to achieve them with the included processes. Thanks,Mike  

1
D
Hero (Employee)
1 year ago
E
Do Gooder (Partner)
EqeMariaVDo Gooder (Partner)
asked in Warehouse Data Collection (WaDaCo)

Setup Wa Da Co Barcode PO, Line, Rel

Hi All,Is it possible to set up Wa Da Co in such a way that a scanner can read a barcode that consists of a PO No, Line No and Rel No? If so, How can this be done?Your help will be greatly appreciated.With kind regards, Marian.  

1
D
Hero (Employee)
1 year ago
T
Do Gooder
techifsDo Gooder
asked in Warehouse Data Collection (WaDaCo)

Permission to Warehouse Data Collection Processes

Can I know how to check the presentation object which is required to be granted to access Shipment and Arrivals indicated in the screenshot below  

1
D
Hero (Employee)
1 year ago
HoiAnushB
Superhero (Partner)
HoiAnushBSuperhero (Partner)
asked in Warehouse Data Collection (WaDaCo)

401: Unauthorized error in IFS Aurena Scan It 10

IFS Version – APP10 UPD11A user gets 401: Unauthorized error in IFS Aurena Scan It 10The error is only there for several users and other users can use the app without any error.Seems the device and app are working properly as one user was able to log in and another got the error using the same device.All users are granted WADACO_MOBILE_USER and TOUCHAPPS_ADMIN permission sets.Has anyone got this error previously and what is the remedy for this.

1
D
Hero (Employee)
1 year ago
K
Do Gooder (Partner)
KotaDo Gooder (Partner)
asked in Warehouse Data Collection (WaDaCo)

How can I print directly from WADACO?

Dear Community.How can I print directly from WADACO and output forms from the printer?I'm considering using Data Collection Configurator "REGISTER_ARRIVALS". Among the line items, there is an item of "PRINT_INVENTORY_PART_BARCODE".I used this field, but the data was saved to the Report Archive and did not output from the printer.I want to run a print from WADACO and output from a printer. If you know how to do that, please let me know.Best regards.

1
D
Hero (Employee)
1 year ago
H
Do Gooder (Customer)
Hard2HandleDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

IFS Data Collection

What are you using for data collection in IFS?  WaDaCo?  Something else?  What do you recommend for data collection in IFS? 

1
william.klotz
Superhero (Customer)
7 months ago
T
Do Gooder (Customer)
THeerDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

WaDaCo config

Hello,  Is there any WaDaCo config which would force a user to enter a value? Its lets user bypass the Barcode ID without entering value.  

1
D
Hero (Employee)
1 year ago
L
Do Gooder
Lureis952Do Gooder
asked in Warehouse Data Collection (WaDaCo)

How to install and configure Scan it in the current version of IFS or Aurena? (Read the description)

Hello community, (This is not an existing topic, I checked before) I've been searching around here for a topic that would help me install and configure Scan it, but I found that some are skipping important steps and that didn't help me completely. We have access to Aurena version 10, but we have been using the IFS executable software for 1 year. My question is: After installing the Android application 'Scan it for applications 10', the access was configured in 'Account Manager' and accessed with the 'IFS Credentials and password'. NOTE: We use the master user I managed to generate the license on the Scandit.com website as a test and I pasted the license on the IFS as per the tutorial of another topic. After these steps I open the Scan it app and the following question/message appears: 'No processes enabled for current user and website. Change website? When researching this, I found that I needed to do a setup over WADACO and IAM. I found WADACO in the permission set, but I didn't find

1
D
Hero (Employee)
1 year ago
K
Do Gooder (Partner)
KumikoDo Gooder (Partner)
asked in Warehouse Data Collection (WaDaCo)

Hi, How can implement warning message on WADACO process?

Hi, How can implement warning message on WADACO process?I recognized there is method for error message, but this stop wadaco process,we want to display “warning” message, which is for example note the item is special item for user, without stopping process.Does anyone have an idea? Or, is there any example on core WADACO process?

1
D
Hero (Employee)
1 year ago
E
Do Gooder (Customer)
elegreDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

WADACO app9

Dears,We have a need for displaying blocked material on the scanner with something that really pops out. In the process of handling blocked material we do need to move it sometimes but then it would really be great if the WADACO really displayed that out loud so to speak :) A really poka yoka action Can someone please help out? We are using App9 KREleonor 

1
D
Hero (Employee)
1 year ago
L
Sidekick (Customer)
LundahlOskarSidekick (Customer)
asked in Warehouse Data Collection (WaDaCo)

WaDaCo Could not establich a secured connection with the indentity provider

Hi, I have an issue trying to use the ScanIT app for android for WaDaCo.When I enter the system id: Example.Company.comTAS ID: https://Example.company.comI get the error message “Could not establish a secured connection with the Indentity Provider”. What can be the issue? We are using IFSAPP10

1
James Ashmore
Hero (Employee)
1 year ago
Z
Do Gooder (Customer)
ZhanHaoDo Gooder (Customer)
asked in Warehouse Data Collection (WaDaCo)

IFS Cloud 22R2 - Scan It Projection

I did some testing using the "ScanIt" projection and it seems to only control access to the IFS Scan It application and does not work independently. To be able to proceed further we still need to give standard projection. We have purchased 50 licenses for warehouse data collection app. My understanding is that this "ScanIt" projection will act as an add-on license for the user to only have access to the application and we still need to consume our full user license. Please correct me if I'm wrong.

1
James Ashmore
Hero (Employee)
7 months ago
D
Sidekick
Dario Flandia
asked in Warehouse Data Collection (WaDaCo)

Wadao Report_Picking_Part Release reservation

HelloHow can I setup the step (29) RELEASE_RESERVATION as auto-pick?We want that the step will not be displayed during the picking and that it will be an auto-pick = yes. So that the reservation will always be released as it is in the usual standard picking process. Currently I have following error message:  

1
D
Hero (Employee)
10 months ago
Link
Superhero (Customer)
LinkSuperhero (Customer)
asked in Warehouse Data Collection (WaDaCo)

WADACO log in without Azue AD

Hi all,we use IFS App 10 with SSO (Single Sign On). If I start “IFS Aurena Scan It 10” I have to log in with my Microsoft Azure AD.How can we deactivate Azure AD on “IFS Aurena Scat It” only, that we can log in with IFS username and password?Thank you in advance.

1
Link
Superhero (Customer)
1 year ago

Badges

Show all badges
Terms & ConditionsCookie settings