When trying to do "Database Open" and "Reload", Advance Planning Board (APB) gets loaded to the stage "CBS Schedule Successful Loaded" then the Advance Planning Board gets crashed and closed down.Steps followed:Following steps were followed to load the “Shop Orders” in the APB. When trying to reload from the database APB gets crashed and closed down after the following screens. Version of the APB client: When checked the APB logs there were not any error entries.For further reference those logs were attached below.
Issue:After completing the configuration for SFTP readers/senders according to the following documentation, how to test the functionality of SFTP readers/senders?https://docs.ifs.com/techdocs/23r1/030_administration/030_integration/300_ifs_connect/010_configure_connect/060_transport_connectors/configure_sftp_transport_connector/#sftp_sender_specific_parametersResolution:According to RnD team,There is no functionality like having a test button or whatsoever now to test SFTP readers/senders after the configuration is completed. There are internal discussions to include functionality to test SFTP sender like in IFS Application 10. For SFTP reader you can test the connection by checking whether FTP location has the access by using a third-party tool like "FileZilla".
After creating a custom attribute for an entity, it is required to enable History Log for that. For that following steps were followed. Test Plan:Create a “Custom Attribute” in the "PurchaseOrder" entity and publish it. Open the "History Log Configuration" page and search for Lu Name "=PurchaseOrder". Observe that only one entry is shown with Table Name "PURCHASE_ORDER_TAB". Expectation:Expects another entry - "PURCHASE_ORDER_CFT", so can enable logging on custom attribute. This used to work in IFSAPP10. See following attachment. But in IFS Cloud, it doesn’t seem like above. See following attachment.
A Cust layer add-on function calls a standard function. The standard function has changed its arguments due to a service update, but it is not detected by Update Analyzer.Analysis is done for update 22R2SU2 to 22R2SU3.According to the technical documentation, the following mentioned impacts are not clearly mentioned in the pre-defined list.https://docs.ifs.com/techdocs/22r1/060_development/050_development_tools/110_update_analyzer/010_analyzing_impact/070_interface_impacts/Refer to the following table to check the information about changes.Cust Layer Source Differences between 22R2 SU2 Core & 22R2 SU3 Core Is this impact shown in the tool? 01. UpAnalyzeTest4-Cust.plsql module: order LU: CustomerOrderFlow Procedure: Customer_Order_Flow_API.Create_Report_Settings In this case, a new default parameter is added to the procedure "Create_Report_Settings". No 02. UpAnalyzeTest5-Cust.plsql module: vim LU: TransferMaintEventUti
Is anyone else having documentation for APPS 7.5?
Issue:Cannot add new acceleration packages in Cloud. There is no + button in the window: In-Memory Acceleration Package.Refer to the following attachment also:In the tech doc following information is available: It is possible to create custom In-Memory Acceleration Packages. It can be done using the same page meaning that all functionality like calculating estimated memory requirement, enabling/disabling In-Memory Acceleration Packages, etc. is available as well. URL: https://docs.ifs.com/techdocs/23r1/030_administration/140_system_info_and_util/025_in_memory/Questions:How to create custom In-Memory Acceleration Packages as mentioned in the tech doc? Is creating custom In-Memory Acceleration Packages through the Aurena Client possible? If not how?Product Version: 23R1 SU5
Issue:When downloading and running the Print Agent, the documentation says it should prefill most fields. It gives them a default value but a dummy one.Product Version: 22.2.7Resolution:In IFS cloud, the authentication is handled by IAM identity providers. Therefore, it is necessary to set up an IAM client id for IFS Print Agent. Therefore, to log into IFS Print Agent, you must set up an IAM Client first.For more details, please refer to the section - "Setup IAM Client for IFS Print Agent" in the following documentation.https://docs.ifs.com/techdocs/22r2/070_remote_deploy/400_installation_options/003_security/030_setup_iam_clients/#setup_iam_client_for_ifs_print_agentThe default values for "Connection String" and "Client Secret" will not be the ones of your environment. Adjust those to make sure to connect to the proper instance.Refer to the following attachment for more information.Print Agent valuesNote:You must add the client secret value from your IAM Client 1:1 here. It will be en
Issue:It is possible to transfer large DB extracts from the FTP server ftpeu.ifsworld.com.It doesn't seem to be possible to connect directly from the Linux DB server through command line SFTP or SCP to get the file directly to the server.Instead, it is possible to connect with FileZilla on Windows so the file must be first downloaded to NAS through Citrix and then SCP'd into the Linux host.Question: Why is it not possible to SFTP directly from Linux hosts (sftp ftpeu.ifsworld.com or curl just hand and give timeout) or what steps can we take to make downloads directly from ftpeu.ifsworld.com in Linux command-line?Environment: Linux hostsCause: N/AResolution: You can use lftp, that supports ftps required by ftpeu.ifsworld.com.In Oracle Linux, which can be installed with root permissions with:yum -y install lftpThen using the following command, it is possible to access ftpeu.ifsworld.com via Linux cmd.lftp ftps://ftpeu.ifsworld.com
Issue:The "ExcelQuickReport" interface of the application has been used as a server task to send the email when Excel is created and emailed. The following questions were raised regarding this.Where is the Excel stored until it is emailed? Is it stored on a table in the DB? If stored in a DB table, which table is it stored in? What is the name of the table? Is the data stored before Excel is created instead of saving Excel? At what point will the saved Excel or data be deleted? Or will the data be saved for a certain period and then deleted? What is the retention period currently?Environments/Databases: IFS APPS10 UPD8Resolution:Refer to the following answers to the questions.No, excel is not stored in the database. As excel is not stored in the database, there is no such table. Data for the excel is obtained from the "Quick Report" that you need, which is already saved in the database. There is no deletion of data. Because necessary data for excel is obtained from a quick report. Tho
IssueTest Steps:01. Open many Windows like below. 02. Then press the 'Back' button. An error message will appear.Error: User XXX has not been granted access to activity AbortRequest ResolutionThe actual reason for the error message mentioned is not having permission for "AbortRequest" activity. The activity "AbortRequest" is an IFS base functionality. You can view "IFS Base Functionality" inside the "Activities" tab. In there you can see the activity "AbortRequest".The following attachment shows where "AbortRequest" activity can be found in IEE client.Workaround to prevent the error from occurring:So, what you must do is provide permission for the "AbortRequest" activity which is inside the "IFS Base Functionality" for the users who are getting this issue.Reason for this error:Some, or many I would say, of those activities, are technical building blocks in certain flows in IFS. They are not documented since, in general, they are not meant to be used by anyone other than our internal Pr
IssueI want to implement an interface to IFS by using RESTful APIs. In my specific case I want to query IFS for customers via REST. I am using the projection CustomerHandling to GET information for a given customer number. We have developed several custom objects within the LU CustomerInfo and some of them being custom enumerations. If I query IFS for the customer, I get a JSON result containing all fields of that LU but with the issue that the enumerations do not contain the value they show in the IFS client. The database has the correct value too. Only via REST the Enums return something else. In fact, I don't know what the value should represent.Please find attached two screenshots. One showing the custom fields (dropdown list) in the IFS enterprise explorer and the other showing the JSON result I get when querying IFS via REST for the same customer.Note:I do receive the same JSON result when posting the REST URL into a browser.URL: https://vsm-test.ifs.cloud:48080/main/ifsapplicat
Refer to following “Quick Report” query which is taking 10+ minutes or even timing out on some occasions. Any ideas on increasing performance of this SQL query? SELECT DISTINCT sp.activeind, sp.catalog_desc, sp.catalog_no, sp.cf$_last_modified, sp.contract, sp.gtin_no, sp.List_price, sp.List_price_incl_tax, sp.sales_price_group_id, sp.sales_unit_meas, spc.cf$_last_modified AS char_lastmodified, spl.last_updated AS SalesPrice_LastUpdated FROM Sales_part_cfv sp LEFT JOIN Sales_Part_Characteristic_cfv spc ON sp.contract = spc.contract AND sp.catalog_no = spc.catalog_no LEFT JOIN SALES_PRICE_LIST_PART_PRICE spl ON sp.catalog_no = spl.catalog_no WHERE sp.contract = '201' AND (sp.cf$_last_modified >= '&datestring' OR spc.cf$_last_modified >= '&datestring' OR spl.last_updated >= TO_DATE('&datestring2', 'yyyy-MM-dd'))
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
