Hello friends, hope everyone is well,We create a StopPSO-Cut attribute and place it on the job codes that we want removed from the technician's timeline (PSO Pic))We waited 5 min and it only worked when we forced it manually: (PSO Pic 1)Whenever we do this manually, it is reflected in System TasksWe then configured “ System Tasks – Schedule “ to auto update every 1 minute. The “Run History” shows the routine was run but it did not not update the PSO: PSO Pic (2)Why is not MWM configuration working automatically the same it is working manually?
My friends of the Community,At the step (2) of the help part certificates, it states ‘’to print Query (F3) for the relevant work order, right-click and click Print Part Certification Form. The Print Release to Service Documents assistant opens.” I took a print of my screen in which I could not find this path. Is there a setting to enable this command?Regards,Leibnitz
Hello, my friends of the Community,I have been dealing with this issue for a while. I did many different test to check if different configurations would lead to different results, but it never did. I have not been able to quote additional items in Maintenance Orders (MO) when it was previously connected and released to a Service Quotation (SQ) at its Header. The normal flow of a maintenance is to cast the initial work scope, its quotation that will be connected to a SQ and release. In that case, release of both of MO and SQ. When I connect the SQ of the Header of the MO, meaning that all the items will be included on it. Later on, additional items will show up either due to non routines or due to opportunity. What I am experience is the difficulty of not being able to quote those additional items included in the MO.For the additional items, I would expect to be able to connect them into a SQ using the RMB at the right side of the MO screen, with the MO detail tab selected. I found a wa
Is there a single report that includes all Maintenance Events: Scheduled, Life Limit, AD/SB… showing last performed and next due maintenances in it? The closest I see is the Serial Maintenance, but I need to navigate from tab to tab to get a whole view and last performed maintenance is in a complete separated tab.I need also to see maintenance for the Serials installed, in case they have their own Maintenance Program. That is the customary way of presenting the maintenance report to Brazilian Authority and, in the need to see any detail, a filter is applied, not the contrary.
Dear Community, I registered a new Serial with manufacture date on 1/Mar/2019. I should enter two operational logs to go ahead with my maintenance tests on 1/Feb/2021 and 2023 respectively. However, I mistakenly entered for the first log the totals for the second entry, what would scrape my test.I looked for some way to undo it. There was the edit feature allowing me to blank the field and re-enter the correct values, but I was never able to save them.Although I could easily register a new part to go on with my test, which I ended up doing, I was wondering if that occurred with an actual record, for which that get away would not be possible. What should I do to get it fixed?My best regards,Leibnitz
Hello Formidable Team,I am facing issues with resource allocation. The ultimate goal of this test is to see if a tool becomes unavailable once set to scheduled or unscheduled maintenance. But before I dealt with the maintenance side, I checked if I registered the resources properly.If I start the allocation with the 'Filter by Available Resource' flag unchecked, I can see the three tools I registered for this Work Order (WO) available for selection. Once I check this option, all three tools go away. I opened only one VIM WO after registering the tools, so the unavailability does not come from other allocations. There is no EQUIPMENT WO open for tool repair or preventive maintenance. Why do they not show up in the allocation table?At the resource navigator, we can select the calendar to be used by the Resource Group. I did not see any effect in choosing the two options loaded in the system, the default calendar and the Maintenance Calendar, which is 8:00 to 12:00, 13:00 to 17:00, Monday
Hello Dream Team,I am going through two relatively large Maintenance Orders to experience the ELS characteristics. The two are very similar except that, for the second, I wanted to try subtasks how IFS would be like (Pics OM 1 and 2).The repeating subtask belongs to tasks that go into the same WO. So, as an additional step, I went into MRO and Fleet Operations\Heavy Maintenance Execution\Work Order Management\Work Order Structure and used the Set WO Master/Duplicate command to optimize it (Pic 3).I am repeating the same process to move forward quickly throughout the WO:Alocate resources. Release WO. Set technicians status to Work Started. Pick Materials. Set tecnicians status to Finished. Anotate Action Taken. Do the inspector Sign Off (Mechanic Sign Off occurs when I set the respective technician status to Finished. Set the materials as Non Invoiceable. Set the Work Task to Finished. Set the WO status to Finished.Right on the WO for the subtasks, I have been give the msg ‘Actual Start
I found no documentation for what the selection of this flag does. Does anyone know? Does anyone have examples? Regards,
Hello All, In MRO and Fleet Operations\Fleet and Asset Management\Maintenance Program\Maintenance Plan, there is the checkbox Adjust Above Upper Tolerance which help states the selection adjusts when the maintenance is performed above the due date + the tolerance, but there is no explanation on how the calculation is done is this case.For the calendar options, Cal. Int. - Adjust if done Early (Late) checkboxes, I was able to find in the page help that IFS adds or subtracts the days anticipated or exceeded, respectively, on the next due date. Is the calculation the same for the Adjust Above Upper Tolerance? Does that subtracts the quantity of the operational parameter exceeded in the last performed maintenance? Thanks for the support!
Hello All, In MRO and Fleet Operations\Fleet and Asset Management\Maintenance Program\Maintenance Plan I need to define a Mx Event for the Serial that is based on the secondary parameter only. There are number of Mx Events that are controlled based on FH and FC, but there are a few that is controlled only based on the FC. Thanks for the help
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
