Products (Manufacturing, Products, Engineering)

msimovicDo Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Kanban - run Simulation

Hi at all,did somebody has expirience with the Job “Run Simulation” in “Kanban Demand”?I had till now not found any information or explanation about this topic?And if I do this in the Cloud Environment it is not quite understandable.Thanks for your supportMilanko

7 months ago

CurPiapHeDo Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Splitting a batch in two handling units after creating a MRB Case

The case is, that when a MRB case is created for a specific lot/batch on a Handling Unit in the Inventory Part in Stock view, and you want to disposition the lot/batch , you wantt to split the lot/batch on two Handling Units in order to create two different disposition lines, where a part of the lot/batch can be used as it is, and the other part needs to be scrapped. It is possible to split the batch on two handling units on the inventory part in stock view, but it is not having any effect on the MRB Case, it looks as though the hole lot/batch is still on the same handling unit. I cant refresh or update the MRB case in any way.

7 months ago

ewatsSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Advanced Planning Board Batch Processing/Load to Database

I’m looking at implementing scheduling with the Advanced Planning Board or CBS.What is the purpose of Batch Processing in the APB? Can the results from the batch load be set to save to the IFS database automatically when it runs? Or is CBS needed for automated scheduling? Thanks,Eric

7 months ago

haruta-asabaDo Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Unable to update structure and routing status with multi-level authenticator

How do I update my status in the MultilevelPromotion?

7 months ago

Vimukthi MahakumburaSuperhero (Employee)

asked in Products (Manufacturing, Products, Engineering)

What scenarios trigger SODIFF+/- transactions?

It is known that SODIFF-/+ transactions are generated in several scenarios. This is an attempt to kindly invite experts to identify scenarios which triggers SODIFF-/+ transactions in IFS in this forum to make it widely enable.

7 months ago

Constantinus101Do Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

Manufacturing Visualizer vs Table

Hey guys, Have you also experienced some discrepancy between manufacturing visualizer and the table content? For example the filter is set to only include work centers 23 and 24. The machine productivity chart follows those filter criteria but the labor productivity (bottom bar chart) does not. It includes further work centers which were not selected in the filter criteria in the first place. Any explanation for that? Thanks

8 months ago

bverderaDo Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

-OP removed after Outside Processing

We have an OP part causing issues creating a HAR. There is concern that there's an issue in IFS regarding this part number (#######-###-OP). I don’t believe It should have the -OP appended to it at this point given that parts are inventory. As I understand, the OP is added when parts are sent out for Outside Processing and removed when parts come back from that processing.

7 months ago

PJIFSDo Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Quantity per assembly in recipe Structure

Hi All,My understanding is that in a recipe structure where all parts are added in kg and Enter by is Qty weight UoM the Quantity per assembly is the quantity required of each Part in the structure for 1kg of the parent part.However, I have come across a structure with the same settings as above where the quantity per assembly total is 6.4. I can’t see how this has been created, and can’t recreate anyone have any ideas?Thanks

7 months ago

First EmployeeSidekick (Partner)

asked in Products (Manufacturing, Products, Engineering)

DOP Netted orders are partially reserverd after release

Hi, After creating, releasing and netting a DOP structure, we have multiple shop orders generating the same end product. We merge these shop orders, in a planned status, into one order. However, if we now release that one shop order, IFS only reserves the components which were in the initial shop order. The components that come from the ‘old’ shop orders, are not reserved. However, everything was netted. The reserve/issue method of that SO is “Backflush” If we take a look at the “new” shop order, under ‘DOP Supply orders’, all components are listed there. The supply type is inventory reservation. In “inventory part reservation screen”, we see that the part from the “original” shop order are reserverd, the ones from the “old” shop orders are still netted to the DOP. Any experience with this?

8 months ago

craryitSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

order_supply_demand_api.get_qty_plannable_fast

Has anyone used this API before? I am trying to use it to get a plannable quantity from a specific date, but I can’t seem to get the right numbers to calculate. I am guessing I am misunderstanding one or more of the input variables. FUNCTION Get_Qty_Plannable_Fast ( contract_ IN VARCHAR2, part_no_ IN VARCHAR2, configuration_id_ IN VARCHAR2, include_standard_ IN VARCHAR2, include_project_ IN VARCHAR2, project_id_ IN VARCHAR2, activity_seq_ IN NUMBER, dist_calendar_id_ IN VARCHAR2, starting_balance_ IN NUMBER, available_balance_ IN NUMBER, picking_leadtime_ IN NUMBER, planned_due_date_ IN DATE, stop_analysis_date_ IN DATE, site_date_ IN DATE, source_ IN VARCHAR2, exclude_reserved_ IN VARCHAR2, exclude_pegged_ IN VARCHAR2) RETURN NUMBER

7 months ago

CCunninghamDo Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

Aurena Shortcuts prompt for variable

In EE we have shortcuts that refer to advanced queries which prompt the user to enter a variable, For example we have a shortcut that takes the user to Inventory Transactions History and prompts them to enter the Lot/Batch No, I understand SQL and Advanced Queries aren’t possible in Aurena however is it possible to prompt the user for an variable input? In EE this is possible by putting a & in the search criteria field We are currently using IFS Apps 10 - UPD 19

7 months ago

lisa.gilesABSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Setting Up and Using Barcodes in IFS Apps 10

We are currently exploring if using Barcodes against our inventory is something we want to develop. Does anyone know how I can access some Tech Docs regarding how to set up and what Tech Requirements there are? Thanks,

7 months ago

DMNVHEIDo Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

serial aaa for part bbb already exists on a specific stock or transit record

ErrorSerial aaa for part bbb already exists on a specific stock or transit record issue.CasePart is serial traced, not traced in inventory, but specific part has been identified so has a single record in inventory part in stock, other stock is of this part is “anonymous” (*)Part is reserved for shop order and via wadaco shop order picking the specific part has been selected to be picked. Result error as described occurs.Please advise, kind regards,Vincent Heijmer

7 months ago

Buwaneka ParanamannaDo Gooder (Employee)

asked in Products (Manufacturing, Products, Engineering)

Project transactions get stuck in Corrections Status Intermediate

When customer tried to credit invoice , the project transactions get stuck in corrections status Intermediate. When checking the created project transactions, there are two transactions. On is in Intermediate state and one is in Corrected state. How to process this and get the transactions get corrected?

7 months ago

FakhmiadiDo Gooder (Employee)

asked in Products (Manufacturing, Products, Engineering)

Manufacturing Report and Traceability for Surface Mount Device Machine

Hi All,Currently we are working with company that running in Electronic Industrial use IFS Cloud.They have several production line machine called by Surface Mount Device. A set of machine that working for mounting component on a PCB board. There are some condition with this manufacturing process;We don’t use IOT integration for manufacturing Manufacturing proposed use Production Schedule/Repetitive Manufacturing Component Inventory UOM in PCS but have catch UOM in Roll/Tape Traceability for material component lot need to be traced for each production line. Common Material component part can be used in multiple production line. But when a specific part Roll/Tape planed for 1 production line. It cannot be used for another production line. Multiple ‘Roll/Tape’ can be used for one Production Line.Does anyone have any experience dealing with this condition?I’m looking for practical solution for this condition.Thanks! -Adi-

6 months ago

First EmployeeSidekick (Partner)

asked in Products (Manufacturing, Products, Engineering)

Default remaining qty in shop floor time clock

Hi, For the shop floor workbench, we have the option to display the remaining operation quantity in the approve operation dialog.This can be enabled on the site screen. I would like to have the same feature for the shop floor time clock. Is this possible?

7 months ago

KrupSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Routing operations for cost vs. planning

Our current routings use 4 operations, one for each zone of the machine. Management likes that we can report labor by machine zone using these 4 operations, but the planning team wants a single operation to plan by so they do not have to deal with the noise that 4 operations creates. How can I meet this objective within IFS?Thank you!Robin

6 months ago

IC-LukaszPHero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Master Scheduling for Configured Parts - continuation

Hi,Continuation of this topic: https://community.ifs.com/products-manufacturing-products-engineering-40/master-scheduling-for-configured-parts-30168---------------------------------Background:There is a configurable finished good, DOP handled. One of its major configuration characteristics is width. There are 10-20 different values (widths). For each width there is a phantom configured manufactured part created, DOP handled. Occurance of each width/phantom part is controlled by configuration rules. Under each phantom part (=width) there is a list of "real" components in different types - manufactured configured, manufactured non-configured, purchased. Subject:Forecasting using Master Schedule. Business would like to register forecasts in MS for each WIDHT. This is the level where forecasts are possible to establish. We cannot register forecast value for finished good part level, as this summarized information is too inaccurate and cannot be just disaggregated using 'Usage Factor'. We c

8 months ago

BeaIoanaCDo Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Estimate total cost not transferred to Sales Quotation

Hi, Is it correct that the cost that is showing on the sales quotation line, is not connected to the “Total cost per unit/ base” of the connected estimate but instead to the “Total Variable Cost per Unit/Base” in the the Estimate? For example, if I have “Total Variable cost per unit/base” of 11.38, this is the value that will be fetched in the sales quotation once I update it and it will ignore the total additional cost per unit/base and will not take the Total Cost per unit/base. Estimate:Is this the standard IFS behaviour or in which situations is the “Total Cost per Unit/Base” fetched as a Cost in the sales quotation line? Thank you!

7 months ago

KrupSidekick (Customer)

asked in Products (Manufacturing, Products, Engineering)

Scheduling operations as one unit

I am new to IFS (4 weeks) and have been tasked with coming up with a way for our schedulers to be able to plan using drag and drop (I am looking at visual planning) as well as plan with a single line of the route (we currently have up to 4 operations). Is there a way in IFS to group the operations together for planning while leaving the 4 separate operations intact for the rest of the organization? Right now we are on the path of creating a ‘dummy’ work center that would represent the full time on the machine. This is failing because when I set the operation to the bottom of the route (operation 50), it doesn’t start until operation 30 is complete. I need it to start at the same time as operation 10 and complete at the same time as operation 40.Is there a way in IFS to make this happen, or what am I missing on the operation set up to make them align?

6 months ago

Tracy NorwilloHero (Partner)

asked in Products (Manufacturing, Products, Engineering)

Part Cost Rowversion Not Updating

I have a customer using Apps 10 Update 14. I’ve noticed when a part’s cost changes in part_cost_history, the rowversion in inventory_part_unit_cost_tab is not updated. This means that the cost can change in that table without the rowversion reflecting that it’s been changed. Is this intended functionality or a bug? Small test:Create part and give it an initial unit cost on 10/2 Change the cost on 10/3 Notice that the rowversion still says 10/2 although the cost is now updated.

7 months ago

mingramDo Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

Default search Active work orders- Work type

I have a problem getting default search to work right here. When choosing Work type to search through and filer that list it is not starting with Default search but showing always all the rows. I can get default search working in the previous window by editing Properties but how to add default search for the next search window?

7 months ago

Shimogaki0111Do Gooder (Partner)

asked in Products (Manufacturing, Products, Engineering)

Setting of dafault values for supply option on project deliverables

Hi allNow I'm considering how we can define the default value of “supply code” per inventory part (or part?) on project deliverables.Ideally, when the configuration is copied, the supply code should be entered according to the default values in the materials requirement of the project deliverables.Please tell me about the parameters and operations that should be set.Regards

6 months ago

westjanDo Gooder (Customer)

asked in Products (Manufacturing, Products, Engineering)

DOP release event

IFS version 10 (update 8).Hi I am trying to create an event on "Release DOP" action.That means, when user releases DOP (on "DOP Head" -> RMB-Release All), than the event should insert data to myself created table "agapp.ag_approve_col_hist" (different schema, not ifsapp) about approval proces on "Customer Order Line" that DOP is connected to. I have created and tested sql code in sql developer and everything is working fine. But as soon as i put exactly the same code (only particular dop_id in pure sql is in the event action parameter &NEW.DOP_ID) into the event action, the system gives me error in "Background jobs" Any suggestions??Thanks a lot.Jan Details;SQL (ok in sql developer):DECLARE key_ref__ VARCHAR2(32000) := NULL;BEGIN for i in ( select * from ifsapp.dop_demand_cust_ord where dop_id = 312169 ) loop begin key_ref__ := 'LINE_ITEM_NO='||i.line_item_no||'^LINE_NO='||i.line_no||'^ORDER_NO='||i.order_no||'^REL_NO='|

8 months ago

Marcin SzczurekSidekick (Employee)

asked in Products (Manufacturing, Products, Engineering)

turning on assistant window

I need to turn on assistant window in Aruena. How to do it?

8 months ago

Page 100 / 103

Products (Manufacturing, Products, Engineering)

2566 Topics

Kanban - run Simulation

Splitting a batch in two handling units after creating a MRB Case

Advanced Planning Board Batch Processing/Load to Database

Unable to update structure and routing status with multi-level authenticator

What scenarios trigger SODIFF+/- transactions?

Manufacturing Visualizer vs Table

-OP removed after Outside Processing

Quantity per assembly in recipe Structure

DOP Netted orders are partially reserverd after release

order_supply_demand_api.get_qty_plannable_fast

Aurena Shortcuts prompt for variable

Setting Up and Using Barcodes in IFS Apps 10

serial aaa for part bbb already exists on a specific stock or transit record

Project transactions get stuck in Corrections Status Intermediate

Manufacturing Report and Traceability for Surface Mount Device Machine

Default remaining qty in shop floor time clock

Routing operations for cost vs. planning

Master Scheduling for Configured Parts - continuation

Estimate total cost not transferred to Sales Quotation

Scheduling operations as one unit

Part Cost Rowversion Not Updating

Default search Active work orders- Work type

Setting of dafault values for supply option on project deliverables

DOP release event

turning on assistant window

Badges

Products (Manufacturing, Products, Engineering)

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded