Skip to main content

Hello,

 

Currently I am trying to improve our manufacturing situation with manufacturing parts. our System is set up with planning method G. The problem that comes up quite often is that when there is a hold up at on of the production lines (assembly line missing a purchase part for example) the manufacturing does not know about that and keeps manufacturing parts according to the orders. now the manufactured parts pile up in the warehouse or at the assembly line while the line is waiting for the other parts. I tried to set the manufacturing to run on Kanban in IFS. so when the parts on hand quantity runs under a certain threshold, the request to produce more parts is created, this also limits the overproduction of parts. but when using the Kanban only for production, the system does not know when to order raw material since the Proposal Release has to be set to: Do not release and the part availability planning goes empty. If I do not set teh peroposal release to: Do not release and keep the kanban circuit then the system also starts to generate production suggestions and starts overproducing again. Maybe there is a different approach to my problem all together, but I haven’t figured anything else out. Does someone have a suggestion what else could I try?

 

With Best regards!

 

Sten

@Savtsuk let me see if I correctly understood your scenario.

You have a finished product - FG1 that needs to be assembled from WIP1 (produced inhouse) and PUR1 (part supplied by your external supplier).

I assume now you have different Shop Orders for producing the WIP part and another Shop Order for the Assembly. And that might be the reason why your production planning maybe is losing track of this.

One suggestion could be use just one Shop Order with 2 different operations

  • internal WIP production
  • assembly

Then, whatever is produced in operation 1 must be consumed in operation 2. You could setup the routing that the 2 operations can run in parralel and then your production planners will see that the assembly is stuck and could communicate to the shopfloor to stop operation 1 from overproducing. Just an idea.

Hello, 

 

Thank you for the quick reply. you understood the problem correctly, but I am afraid that this would not be doable for us. for example the final assembly consists of 100 different manufactured parts and 100 purchased parts. and we print out a shop order for each batch of subparts. the assembly line is designed by the required capacity. for example the line can produce 10 final assemblies in one day. the line storage is built to fit the subparts for 30 assemblies so we have a manufacturing lead time of 3 days for the subparts. but if the subparts and the final assembly would be on the same shop order then the finals assembly cannot start until all the subparts are done also we would need to remodel the way we create shop orders, because each operation has to be started and ended by scanning the barcode on a physical printed shop order, and this cannot be in 100 different stations. that is why I was hoping to build the system so it would react to the quantity of the subparts on the final assembly line. when the quantity goes under a threshold, the system would give a suggestion to start producing more subparts.

 

Thank you,

 

Sten

@Savtsuk  Sten then why not simply use Order Proposals for the WIP part (method B or C). You setup your order point / lot size / safety stock and then the system will ignore the open demands for that part and just create an order proposal based on the  order point / lot size / safety stock. Then you process the Order Proposal and convert it to Shop Order so that you could start your production.

 

You could read more on this at the below page:

https://docs.ifs.com/ifsclouddocs/24r1/MaintainInventory/ActivityInvOrdProposalOrdOrReq.htm?StandAlone=true

Hey,

 

Thanks for the suggestion, I tried this in the test environment but with planning method B for the WIP part we lose the MRP planned demand for raw material.

 

With best regards!

 

Sten

Reply


Terms & ConditionsCookie settings