Warehouse Data Collection (WaDaCo)

294 Topics

TSCLMQUINTASDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

Task ID Description- WaDaCo

Dear all,How can I change this description in the Warehouse Tasks listing in WaDaCo?(WaDaCo Process: START_WAREHOUSE_TASK)Best regards

2 months ago

Chamath KuruppuarachchiHero (Partner)

posted in Warehouse Data Collection (WaDaCo)

"Generate SSCC" on RECEIVE_SHOP_ORDER process through WaDaCo

Hello Community,Anyone of you came across with the below issue when performing the RECEIVE_SHOP_ORDER function through WaDaCo? Pre-requisites“Generate SSCC” enabled in Handling Unit Types windowCreate a packing instruction and connect the HU type Create a Manufacturing part and set up product structure and routing with a component part and create a shop order and connect the packing instruction. Process the Shop order until to Receive step. ( Release > Reserve > Report Operation > Issue)Perform “Receive” User can see, “Create SSCC” option is enabled and when perform the Receive, SSCC numbers are generated and can view them in Inventory part in Stock. BUTWhen user perform the “RECEIVE_SHOP_ORDER” function in WaDaCo. SSCC numbers are not generating and not visible in the inventory part in stock window. Even though the “Generate SSCC” enabled in Packing Ins and Handling unit type level. But as a work around user can select create SSCC in IEE client and then receive through WaDaCo

3 months ago

DaveNormanSidekick (Customer)

asked in Warehouse Data Collection (WaDaCo)

Translation in WADACO

Does anyone know why the translations in WADACO change back to the Prog language when it’s been set to polish. What is happening, we have set up WADACO for UK and Poland but when we sign in as Polish and use WADACO the first couple of transactions are in Polish and then it seem to revert back to the prog (English) language . Any Ideas?

3 months ago

Nimesha WijesekaraSidekick (Employee)

asked in Warehouse Data Collection (WaDaCo)

Wa Da Co task : Process part on transport task - Only one location is available to pick in LOV

HI Community,Looking foreward for your advice on following, Create a transport task. Go to the WaDaCo Warehouse Data Collection configuration page. Release the PROCESS_TRANSPORT_TASK_PART for the company. Start scanning and select the created transport task ID and proceed. When the “To location” data item appears, go to the LOV. Notice that only the location which is mentioned in the created transport task is available in the LOV to select. Why the multiple locations are not available on the LOV to pick?

3 months ago

sholmesHero (Customer)

asked in Warehouse Data Collection (WaDaCo)

Printing all shipment handling unit labels at once - Apps9

All,We often have to play with the pallet configuration of shipments so often don’t print out box or pallet labels until we have got the shipment correct in IFS.I’m wanting to use the IFS report to print the handling unit labels however I can only print one label at a time (even if multiple lines selected the print processes is individual) and this just isn’t a practical way to work.Is there a way to print all handling unit labels in one go?Sarah

3 months ago

astfaraztHero (Partner)

asked in Warehouse Data Collection (WaDaCo)

Report picking of parts in bulk - WaDaCo

Can the report picking by part support a bulk pick by part number?For example, if a Customer Order has:5 different lines for Part# XX-100 for a quantity of 5 each These 25 pieces exist in one Inventory LocationIs there any mechanism that would point the user to go the Inventory Location and pick 25 pieces of Part# XX-100 as opposed to 5 different line items of Part # XX-100?The business requirement requires multiple different line items as reports need to be generated in a specific format with unique tags being referenced on each line item. Although this affects packing of the Shipment, the customer does not want this to impact Picking of the Shipment. I assume that each line will be treated like it’s own line number (i.e. unique demand) as there is no native function in the UI to support this requirement but curious if I may be missing something.Environment: 23R1 SU1

4 months ago

DilrukshiSidekick (Employee)

posted in Warehouse Data Collection (WaDaCo)

The new fields "Customs Declaration Number" and Customs Declaration Date" is missing as Data Items for the configuration "REGISTER ARRIVALS" in WADACO.

Issue: The new fields "Customs Declaration Number" and Customs Declaration Date" is missing as Data Items for the configuration "REGISTER ARRIVALS" in WADACO. Pre-requisites: A company and site with active Mexican localization, part with lot batch trackingCompany Test Steps:1. Create PO for a site in Mexico localization > Release2. Register Arrival via WaDaCo process REGISTER_ARRIVALS3. There is no entry available to enter Customs declaration number and date Below screen capture for normal register arrival window via Receive with Serials/Lots where the Customs Declaration Date/Number are available.

4 months ago

eduardo.smDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

Material Barcode

How do i set the barcorde ID (1st row) the same as Material ID (2nd row)? I need those to be the same so i can issue the material via WADACO. Thanks in advance.

4 months ago

astfaraztHero (Partner)

asked in Warehouse Data Collection (WaDaCo)

Report Picking of Parts - WaDaCo - Loop/Subsequent Process

I’m running into a couple of different issues when using either the Loop or Subsequent process functionality when attempting to pick multiple parts.The following configuration flow is being used:Start Warehouse TaskStart PickingReport Picking of PartBusiness Scenario:A picker within the warehouse needs the ability to pick multiple parts then scan the appropriate Shipment Location to specify where they are physically placing the items. The picker will not know which Shipment Location should be used until they have picked material and are physically bringing it to the shipment staging area. Issue with Loop:If I attempt to create a loop with Report Picking of Parts, the loop is not considering unique lines. The next data set is always a duplicate set of data. I assume this is due to the Unique Line ID being Auto Picked so it continues to grab the first data set as nothing has been committed.Issue with subsequent process:If I attempt to use the subsequent process, the configuration promp

4 months ago

DMNBSOMDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

Count of serial traced parts 'at receipt and issue' & 'not in inventory'

We are currently facing challenges with counting part serials which are serial traced 'at receipt and issue' & 'not in inventory'. These type of parts have a stock record in the ‘inventory parts in stock’ view consisting of a line which states a ‘*’ in the serial number column. When creating a count report consisting of a serial traced part ('at receipt and issue' & 'not in inventory'), WaDaco asks us to scan a ‘*’ for the serial no. field. Where we make use of a barcode label with a GS1 code consisting of an identifier for a serial no. The first error is that the scanner gives an error for a faulty scanned serial no's where the part's real serial no. is scanned through the GS1 code and not an ‘*’. The second thing is that in case we have a counting difference, we need to state which serial no's are missing. Since we do not know which serial no.'s are in stock, we cannot state which ones are missing. Does anyone have a solution/ WoW for the above case? How do we need to set up

4 months ago

jakubjodlowskiDo Gooder (Customer)

posted in Warehouse Data Collection (WaDaCo)

Wadaco every 30 min: ODP_ILLEGAL_STATE: Unable to fulfill the request due to unexpected server state

Eventually solved.The symptom was that the IFS Scan IT application worked properly and every 30 minutes an error appeared as in the attached image. Long story short:the loadbalancer on the Internet gateway switched the channels for different Internet providers (redundancy) from time to time (usually every 30 minutes). Network/Security guy set Wadaco devices for one fixed channel.

4 months ago

Vernon AndersonSidekick (Employee)

asked in Warehouse Data Collection (WaDaCo)

Payload too large error

I have been playing with WaDaCo and adding various functions to a menu and several folders on the menu. I created a folder for inventory movement and added it to the menu with a few other folders of inventory processes.However, whenever I access the last folder, I receive a message stating there is a “Payload too large error”. I can remove that last folder and the error goes away. I’ll admit I am not a technical person so can someone explain this error in layman's term and how I may easily correct it. Also, is there a limit as to the number of elements that can be added to a WaDaCo menu?Thanks!

4 months ago

astfaraztHero (Partner)

asked in Warehouse Data Collection (WaDaCo)

Create and Pack HU - WaDaCo

Looking to combine the Create Handling Unit and Pack into Handling Unit on Shipment configuration.The process would be as follows:Create 1 Handling Unit (i.e. box) Pass this Handling Unit ID to the Pack into Handling Unit on Shipment configuration Create a loop of parts to continue to pack parts into the HU If more boxes are needed, the user restarts at step 1.It doesn’t appear possible to pass a Subsequent Data Item ID to the Pack into Handling Unit on Shipment configuration as the HU ID is not created until after the Create Handling Unit configuration is completed. Is this a limitation or is this possible in some fashion?The users do not want to tag the Handling Units with labels during the packing process. Environment: 23R1 SU1

4 months ago

First EmployeeSidekick (Partner)

asked in Warehouse Data Collection (WaDaCo)

Logic within a transport task.

Hi,In our current flow, we move reserved parts from the stock to a pre-production location using WaDaCo. We take all reserved parts for a shop order, and combine them into a transport task to move them from the warehouse into the production area (but we don’t issue yet, just move).However, we don’t have any logic in this.The transport task is sorted using Source ref 1, which is the line number from the the Shop order.But if we need part A from location AB01 for the first line, and the third line asks for this part again, the operator will first be directed to location AB01, for the second line to another location, and for the the third line again to location AB01. Any idea how to optimise this?

5 months ago

gianni.nevesSidekick (Customer)

asked in Warehouse Data Collection (WaDaCo)

Wadaco - Part reservation

Hi,We just begin to use Scan IT and we would like to know if anybody has the same problem. In the process shipment configuration, one of the steps it is the reservation of material. The problem for us is because the reservation is automatically doing, so we cannot for example, chose what location or lot/batch we want to reserve.My question: Do we have other process in Scan It allowing us to do only manual reservation?Thanks,Gianni Neves

5 months ago

DilrukshiSidekick (Employee)

asked in Warehouse Data Collection (WaDaCo)

Can WaDaCo limit the warehouse task displayed to only show warehouse tasks assigned to the worker/user?

Can WaDaCo limit the warehouse task displayed to only show warehouse tasks assigned to the worker/user?Currently the system shows all the available tasks as below.

5 months ago

TSCLMQUINTASDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

Unattach Part from HU- WADACO

Hi,I'm trying to put the Process UNATTACH_PART_FROM_HANDL_UNIT subsequent to the Process RECEIVE_DISPATCH_ADVICE. The settings I made were these.RECEIVE_DISPATCH_ADVICE UNATTACH_PART_FROM_HANDL_UNITThe process works when HU has only one Part No.When the pallet is multi-part, when reading the SSCC, it doesn’t unattaches all Part Nos from the HU.What setting might be missing here for the process to work correctly?Best regards,Luísa Quintas

5 months ago

First EmployeeSidekick (Partner)

asked in Warehouse Data Collection (WaDaCo)

WaDaCo: default location

Hi, We use WaDaCo, configuration “Move Handling Unit” to move parts in handlings units from the arrival zone to stock.All parts have a default location. Every handling unit has only 1 sort of parts in it.We would like to see that default location on the scanner. However, when we put the “List Of Values” on auto pick, the correct value is fetched but it’s not changeable anymore: WaDaCo goes to the next step with that value.Adding it as feedback also doesn’t help.Any idea? We want the default location to be visible, but it should not be hard coded in the proces.

5 months ago

Vernon AndersonSidekick (Employee)

asked in Warehouse Data Collection (WaDaCo)

WaDaCo Menu Folders and how to use them

I have been playing around with WaDaCo and have created a menu by attaching various configurations to the menu. I can also create folders on the menu but I have a couple of questions: It appears that I am limited to only 16 items on the menu when I use Scan It. Is that correct? In the same menu, I can add a folder but I have these issues: I can add a folder but it doesn’t appear when I run Warehouse Data Collection from the navigator. It also doesn’t appear when I use Scan it. How do I add configurations to folders so that I can reduce the number of each items on a screen? The help text doesn’t describe it,Thanks!

5 months ago

ronhuHero (Customer)

asked in Warehouse Data Collection (WaDaCo)

Print IFS Inventory label via WADACO - Register Arrival process

Community,would like to know your experience when using WADACO process Register Arrival, how to print the label automatically. We have a Zebra mobile printer, on APP10 UPD9.PRINT_INVENTORY_PART_BARCODE = Yes

5 months ago

Sonu WalpolaDo Gooder (Employee)

asked in Warehouse Data Collection (WaDaCo)

Wadaco/ Zebra : How to configure physical keyboard with IFS scan it?

In WaDaCo Zebra devices, how to configure the physical keyboard for other scan-it actions like 3 dot / Exit loop / Undo / List ?Product Version: 22.2.11 Version of the application - 22.2.6.20230310132734.0 Version of the OS platform - Android Version 10 Zebra device “MC9300 - Version R-C-ZTC-MC930B”

5 months ago

LEWISFDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

Manual Issue Inventory Part to project / Activity

We are in the process of rolling out WADACO. But have a requirement to manually issue parts (Mainly consumables, that aren’t called up in a BOM), as people come to stores and request certain items on the fly. We are using issue inventory part and pre-posting to cost centres which works well with WADACO, but there is also a requirement to issue certain items (Again mainly consumables) to a project as well. We were hoping to achieve the same thing by using issue inventory part, and pre-posting to a project, but this doesn’t seem possible as we get an error saying “External project must have a project activity connection” which seems to indicate that an activity is required, something that you can’t specify when using Issue Inventory Part. Has anyone found a way around this? We currently use Material Req’s or project misc demand, but there is no way to create either of these items using WADACO.

5 months ago

LevSupunSSidekick (Partner)

asked in Warehouse Data Collection (WaDaCo)

Aurena Scan IT Login credentials Expired frequently

Hi Experts,One of our customer faced same kind of issue recently. There was no solution mentioned in same problem posted in this link : mWO aurena native - login credentials expired frequently | IFS Community so I reposted same with our problemUsers get below login credentials expired message everytime when they are using Aurena scan it 10 within every few hours (3 times per 30 minutes) . customer only use standard DB authentication and they have default values in MWS.they did not setup values for "Difs.oidc.accesstoken.lifetime" or "Difs.oidc.refreshtoken.lifetime" in MW. But they get this everyday.when i check one users device logs i can see it Kindly give your opinion for this problemThank YouSara

5 months ago

TERMJENNINGSDo Gooder (Customer)

asked in Warehouse Data Collection (WaDaCo)

IFS10- Warehouse Data Collection- not shown for user in Aurena

I am implementing WADACO in APPs10 and using a Zebra scanner running android OS.I have the configuration working for a new test user in IEE, but the Warehouse Data Collection page is not available when I login using Aurena, either from my windows PC or from the scanner. The user ID I’m testing with has the permission set WADACO_MOBILE_USER. I have also granted Warehouse Data Collection presentation object to WADACO_MOBILE_USER trying to resolve this. Aurena does work on the scanner when using the app owner login. What am I missing?

5 months ago

Franck.GSidekick (Employee)

asked in Warehouse Data Collection (WaDaCo)

Dynamique printer ifscloud

Hello question : in my warehouse I work with WADACO and I would like to connect a printer (WIFI) to my mobile terminal. this printer is different every day and therefore dynamic. how can I do ?

5 months ago

Page 2 / 12

Warehouse Data Collection (WaDaCo)

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded