Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

This will include the questions related to Foundation1 and Technology, Infrastructure, Cloud, Integration, Developer Tools, Data and IOT, and Platform.

  • 6,978 Topics
  • 21,844 Replies

6978 Topics

Yasas Kasthuriarachchi
Superhero (Employee)
Yasas KasthuriarachchiSuperhero (Employee)
published in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Have you come across "Sorry, there was an unexpected server error" ?

Have you come across this error?Sorry, there was an unexpected server error Have you come across above generic error? If so how have your resolved it or is it still occurring intermittently? Let us know in the comments 😊 Note: This is a generic error message to which the cause could be in different product areas for which you need to analyze with further details. But here we want to understand how many of you faced it, resolved it or still undergoing with this error popup message. Related error messages: Database error occurred. Contact administrator. Url: Related KB Articles: 

12845
Shangavi Subendrarajah
Sidekick (Employee)
1 year ago
N
Do Gooder (Employee)
NishanthDo Gooder (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS Cloud 23R2 - Setting up SMB storage

Hello,For one of our Remote IFS Cloud 23R2 Customers, we are trying to setup SMB storage. The SMB share was created by the Customer’s IT team and we are trying to configure the parameters in the ifscloud-values.yaml file by following the guide. ( https://docs.ifs.com/techdocs/23r2/070_remote_deploy/400_installation_options/120_file_storage_for_remote/122_installation_guide/#activating_file_storage_service) The MTinstaller is successful but the ifs-file-storage pod is stuck at Init State.  Values on Config file Anyone who have experienced this issue before?Thanks, Nishanth

26
ORFJAN
Sidekick (Customer)
2 hours ago
T
Hero (Partner)
TheoBHero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Error ORA-00936 - purchase order

Hello everyone,When I want to click on this menu to trigger the report of purchase orders : I get this oracle error message: I have already refreshed the security and dictionary cache.Where can this come from?Thanks in advance! 

3
V
Do Gooder (Partner)
2 hours ago
T
Sidekick (Customer)
Thejaswini
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

SFTP Knownhost File issue

Hello , I am trying to create the known host file for SFTP connector to send the file out .We are using APP 10 UPD 18 and when I try to execute the below  code in Command Prompt :(replacing the host names  and credentials) java -cp <IFS_HOME>\repository\server\javaruntime\ifs-fnd-connect.jar;<IFS_HOME>\repository\server\dist\lib\jsch-0.1.55.jar ifs.fnd.connect.ftp.SftpClient -CreateKnownHosts=KNOWNHOSTS -hostname=SFTPHOST -username=USERNAME -password=PASSWORD Also tried with jsch-0.1.53 , I get the error saying :com.jcraft.jsch.JSchException: Algorithm negotiation fail        at com.jcraft.jsch.Session.receive_kexinit(Session.java:590)        at com.jcraft.jsch.Session.connect(Session.java:320)        at com.jcraft.jsch.Session.connect(Session.java:183)        at ifs.fnd.connect.ftp.SftpClient.createKnownHostsFile(SftpClient.java:448)        at ifs.fnd.connect.ftp.SftpClient.main(SftpClient.java:422)  Any suggestion would be helpful. Thanks in advance. RegardsThej

8
T
Sidekick (Customer)
3 hours ago
rcruz
Sidekick (Customer)
rcruzSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Quick Report - SQL expression is wrong

Hello everyone!I’m having trouble to create a quick report. I’m having an error message saying that my SQL expression is wrong, even though it runs on PLSQL developer and it runs on the SQL query tool.I even created an IAL, that works on both methods I’ve mentioned, exepct when I try to save it as a quick report Here is the query I’m trying to save as a quick report:SELECT FUR.IDENTITY AS USUARIO, UF.COMPANY AS EMPRESA, UGMF.USER_GROUP AS GRUPO_USUARIO, CASE WHEN UGMF.USER_GROUP = 'AC' THEN 'FINANCEIRO' WHEN UGMF.USER_GROUP = 'CB' THEN 'CONTABILIDADE' WHEN UGMF.USER_GROUP = 'FS' THEN 'FISCAL' WHEN UGMF.USER_GROUP = 'FT' THEN 'FATURAMENTO' WHEN UGMF.USER_GROUP = 'GR' THEN 'GERAL' WHEN UGMF.USER_GROUP = 'LG' THEN 'LOGISTICA' WHEN UGMF.USER_GROUP = 'TR' THEN 'TESOURARIA' WHEN UGMF.USER_GROUP = 'YE' THEN 'FECHAMENTO ANUAL'

1
Marcel.Ausan
Superhero (Partner)
4 hours ago
udenig
Do Gooder (Partner)
udenigDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

RPL and excel include in version control APP10 - GIT

Hi,We did a new RPL report and generated an Excel report for our project, we are unaware of including this in GIT version control.I appreciate your advice. Best Regards,Udeni

0
udenig
Do Gooder (Partner)
4 hours ago
GISANCAR
Sidekick (Customer)
GISANCARSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Changing Parameter Mappings of an existing Command Group

Is this still identified as a “Future Enhancement”?https://community.ifs.com/framework-experience-infrastructure-cloud-integration-dev-tools-50/changing-parameter-mappings-of-an-existing-command-group-14092I still can’t see or change a created parameter mapping in a command group.Or is there anywhere else you can go to view or edit the parameter mapping? 

0
GISANCAR
Sidekick (Customer)
4 hours ago
S
Sidekick (Employee)
ShouSidekick (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Workflow - refresh page after execute workflow (23R1)

Hi , from 23R1 ,IFS supports to call  Workflow from a Custom Command.  While, as I tested ,after the workflow executed (eg, changed some value of the Page)the web page doesn’t get refreshed.User have to manually click the “refresh” button to get new value shown. Is there any way to make web page auto freshed? ※I added a “Force Complete” Custom Command to a execute workflow    after executed , data is changed , but page not refreshed.  

7
S
Sidekick (Partner)
4 hours ago
S
Do Gooder (Employee)
SASIUSDo Gooder (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

BR Error MI_METADATA_NOTFOUND

launch BR client, type in User credentials.got MI_METADATA_NOTFOUND error. Please guide me in resolving this issue.Thank you.

2
V
Do Gooder (Partner)
7 hours ago
H
Hero (Partner)
Hans AndersenHero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Navigate to page with treeview from Aurena lobby

Hi all,I have page that contains a part with sub parts. In Aurena, it shows like this: I can click on “Expand” and navigate to the sub parts.When making the navigation from a lobby it navigates to the part (item) and not a tree: How do I tell the lobby that it should navigate to the tree and not the Item?Current navigation from lobby:page/EstimateItem/EstimateNodeForm?$filter=EstimateId eq $[estimate_id] and EstimateRevisionNo eq $[estimate_revision_no]

8
D
Sidekick (Customer)
7 hours ago
K
Do Gooder (Partner)
KalinduDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Accessing a Custom Enumeration using expression

Hi, When creating custom attributes, for inbuilt enumerations, I can use:enumeration_name_Api.decode(‘db_value’); But when I create a custom enumeration and try to use the same expression, it gives me errors.Any idea on how to access a custom enumeration using a statement?Error:CUSTOM_ENUMERATION_API"."DECODE": invalid identifier Please help

1
Mayura Wasantha
Hero (Employee)
7 hours ago
M
Do Gooder (Partner)
MuzSheilfDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

components not included in the solutionset.yaml file show as available in the IFS Cloud use place? Is this a mistake?

I am trying to understand why components that are not included in the solutionset.yaml file still show as available in the IFS Cloud use place? Is this a mistake? Many thanksSheila

9
hamalk
Superhero (Employee)
8 hours ago
N
Hero (Customer)
NMALKIHero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Custom tab not visible when accessed from custom menu

HI, I have created a custom tab ‘Register Arrivals’ in Purchase Order window.I have also created a custom menu Purchase Order in ‘External Supplier Invoices' window. Scenario 1: If I access directly Purchase Order window ==>  Custom Tab ‘Register Arrival’ is visible.Scenario 2 : When I open ‘External Supplier Invoices' window/ RMB ‘Purchase Order’  ==>  Custom Tab ‘Register Arrival’ not appearing in Purchase Order window. I noticed that Register Arrival tab will be visible again in Scenario 2  if I remove the param VERSION=SINGLE_COMPANY from the URL .  Any thoughts would be much appreciated.Thanks 

0
N
Hero (Customer)
8 hours ago
paguin
Sidekick (Partner)
paguinSidekick (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

The device is not ready

Hello,In IFS 8 and IFS9 few users are getting message - The device is not ready. can any one suggest on the same RegardsPankaj

1
S
Superhero (Employee)
12 hours ago
C
Do Gooder (Customer)
CBLPATZKADo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Launching IFS Pop-up Language Preference

I have a new End User that as soon as she launches IFS they receive the following message. I have verified her User/Person account which is defaulted to English. Verified her Options setting under Tools are all setup correctly. Deactivated/Reactivated her account. Also, checked her PC and Google Chrome setting are set to the English Language as this always appears before the SSO message for her to connect to IFS. Any suggestions on how to correct this.   

0
C
Do Gooder (Customer)
14 hours ago
B
Hero (Customer)
bdoucetteHero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

BPA Workflow error?

Hello, We are facing a huge issue, in our test and config environments, we cannot inspect workflows anymore, even if they only have a simple projection call in it. When inspecting, we just get the “loading” popup that never goes away. This is on 23R1 and so far, it seems like no one else has been experiencing this other than us. What could be causing this? We’ve refreshed the caches in hopes of resolving this issue but so far nothing has been working. Any and all insight would be very much appreciated. Thanks,Bryan

3
I
Do Gooder (Partner)
23 hours ago
dfsjmarchant
Sidekick (Customer)
dfsjmarchantSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

On page calculations - Risk Score

Is it possible to do calculations on screen, so if a user selects 5 from one drop down, and 5 from another drop down, the screen can apply a formula, for arguments sake, multiple one by the other, and put the result, “25” into another field? 

1
Mathias Dahl
Superhero (Employee)
23 hours ago
M
Sidekick (Partner)
maheshmuzSidekick (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Changing Email Sender Name in IFSCloud

The customer is currently using IFSCloud version 23.2.1, and we've successfully configured the email sender. However, we now need to change the sender name (MAIL_SENDER1) to a different one. Could you please provide guidance on how to make this change? Please refer to the attached screenshot for assistance.  

4
M
Sidekick (Partner)
1 day ago
Link
Superhero (Customer)
LinkSuperhero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Error message "No more data to read from socket"

Dear IFS experts,I get an error message when refreshing the cache:Can somebody support?

0
Link
Superhero (Customer)
1 day ago
K
Do Gooder (Partner)
KalinduDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Fetch value for Custom Field using a Custom Enumeration

Hello, I have created a custom enumeration with data as below; db_value Client_value Seq CS01 Class 01 Object 1 CS02 Super Class Object 2 CS03 Unattended 3 CS04 Restricted Object 4 CS05 Other 5   I have another custom enum, which created an LOV in a page where the user selects something called “class” from the LOV. The enum looks like this: db_value Client_value Seq CS01 Class 01 1 CS02 Class 02 2 CS03 Class 03 3 CS04 Class 04 4 CS05 Class 05 5  However, I want to create a link between these two enums;when a user selects a “Class”, the description (Client Value) From first table should be automatically fetched into a custom read-only field. I cannot use the same enum for the description because both types of client values are needed in different situations.  How can I achieve this without using code?.Kalindu  

0
K
Do Gooder (Partner)
1 day ago
M
Sidekick (Customer)
MatthewSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Retry Application Message Count

Hi,I’m trying to find an way of outputting into a report the number of times an Application Message was retried in Apps10. I can see the data on screen - but no way of debugging (that I can see) to get at the figure to extract. Anyone got a suggestion?

1
T
Hero (Partner)
1 day ago
M
Do Gooder (Customer)
MichaelDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Supported languages in IFS Cloud

Is there also translations in Hindi for Aurena / IFS Cloud?

2
M
Do Gooder (Customer)
1 day ago
DHCRADPA
Sidekick (Customer)
DHCRADPASidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS APPS10 TouchAPPS - How to register a new ScanIT device

We’re APS10 UPD16 planning to upgrade to UPD20 in the next month. No SSO.I’m trying to Deploy APPS10 ScanIT on a few devices for testing. We have WADACO licenses.Does someone know what would be the steps to configure a new device? 

3
DHCRADPA
Sidekick (Customer)
1 day ago
DHCRADPA
Sidekick (Customer)
DHCRADPASidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

SPEC2000 PN validation

How can I implement some validation of content in Part Number field to ensure validity with ATA Spec2000 standard?I have the minimum rules in the following JS code. Is there a preferred way for data validation at input, before SAVE (which could be ran through an event) ..  //function to verify part number meets Spec 2000 function testPN() { let inputText = document.getElementById("pnText").value; //maximum number of characters allowed in the part number let maxChars = 15; //remove any leading and/or trailing spaces from the inputted part number inputText = inputText.trim(); //Alert user if the submit button was pressed with no part number entered if (inputText == "") { alert("Please enter a part number to analyze."); } else { //define variables let errorFound = false; let

0
DHCRADPA
Sidekick (Customer)
1 day ago
Link
Superhero (Customer)
LinkSuperhero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Background job error message "Oracle process was killed"

Hello everybody,I got the following error message while processing a background job: This background job was set to state Error because the executing Oracle process was killed. ( Detected by cleanup process at 2024-04-22-08.04.09 )Why does it appear?How can I enable the checkbox “Exclude from Cleanup”?

5
Marcel.Ausan
Superhero (Partner)
1 day ago

Badges

Show all badges
Terms & ConditionsCookie settings