This will include questions related to supply chain.
Recently active
Shipment order was introduced in IFS Cloud and our customers so far are seeing some great benefits. However we are currently discussing with a large rental asset supplier who want to be able to trigger a move from the existing customer location to the new customer location. The enhancement request is ; Add “Location” as a parameter for sending and receiving parties. Currently on creation of a shipment order only site or remote warehouse can be selected. This would also solve an issue with reverse logistics as IFS has no way of creating ‘pick-up’ type shipment orders which does impact a number of our customers
We recently upgraded to IFS Cloud 25R1. Our sales people occasionally enter Call Center cases as type Customer instead of Global. We just had this issue and I can’t figure out how to give myself access to this case in order to change the Case Type.I set the Customer to B2B CustomerI added myself to the Case Access Group I assigned the customer to myself in B2B User-Customer But I still can’t see the case.I have verified through the backend that the case does exist.What am I missing?
Hello all,For a customer, when implementing EDI with an external supplier (ORDERS), one of the requested fields for the supplier ERP is to be able to identify the Demand site. The delivery address of purchase order could be different from the site's address.Do you think that it is possible to send an information about the ID of the demand site? thanks
Hi, Is this some standard functionality coming with IFS Cloud. I noticed this inSupport / IFSCLOUD / 25R2 Core / REGIONAL TEST CMB. Wondering if there is any setting we can enable this or if this is a workflow created. This was appearing when saving a new sales part.Thank you
Hi all,In order to facilitate the invoice matching, we would like to configure the following, at supplier level : -we would like to no longer need to receive the PO lines in register arrival, in order to trigger the invoice matching.Indeed, for some suppliers, we sometimes receive the invoices before the PO lines are received in “register arrivals” screen.We would be ready to match these invoices only at PO level.Is it possible to trigger the matching only at PO level?have a good day!
Hi,When a Customer Order (CO) header is blocked and the CO line inventory part is supplied through Purchase Order Transit (Purch Order Trans) from an external supplier, the demand is not considered in Inventory Part Availability Planning, (Not in MRP) even when Release for Material Planning is enabled.Is this the intended behavior in IFS?We have observed that the same blocked customer order demand is considered by planning when the supply code is set to Inventory Order, but not when the supply code is Purch Order Trans. Could you please clarify whether this is expected system behavior? Note: Customer Order block reason is having Exclude from Mtrl Planning as False in all above scenarios.Thanks!
I’m trying to see if other users are seeing this behavior or if anyone knows of it being fixed before I put a ticket in to IFS to investigate. We’re recently upgraded from 24R1SU11 to 25R2 SU4 and our purchasing group has just noticed that when they update a custom field on the PO line, that the wanted and promised date of the PO line is being recalculated. Below is the same line before and after updating a custom persistent notes field called “container number”. Has anyone else noticed this behavior and if so, do you know if IFS has fixed it?
HelloFrom 1 March 2027, the non-preferential country of origin must be declared in EU import customs declarations, even where preferential treatment is claimed and the preferential and non-preferential origins are identical.Will IFS Cloud support this regulatory requirement in standard functionality? If yes, in which IFS Cloud release or Service Update will this functionality be delivered and when will it become available?In addition, will the non-preferential country of origin be available separately for outbound customs integrations? Thank you in advane! Best regardsLebeat
In 26R1 has anyone successfully set up having one Shipment Type to handle the workflow for a Supplier Reject/Return and a different one to handle Supplier Material? We manage Supp Matl using Purchase Component rather than Customer Order so are required to use Supplier Shipments in 26R1. We’ve been using Shipment in our reject process for a while. I say “use” - our reject process doesn’t need the multiple steps in a Shipment workflow so is currently set to get created and then skip directly to Closed. Our Supplier Material process does need a pick to be generated, have someone report it, and create a ‘delivery note’ to accompany the parts.I have tried various combinations of Shipment defaults on Site/Supplier with no luck.Thanks in advance!
Dear Mates,PR Authorization Rule fetched when Releasing the PR..However disappeared after Approving the OQA.What could have gone wrong here ?This is a newly created company and the same method works fine with existing companies.Our Flow is OQA Approval---->PR Authorization----->Convert to POIFS Cloud 25R1 SU7 Thanks in Advance SBM
Hello, I am currently working on a customer project focused on Sales & Operations Planning (S&OP) in IFS Cloud and, despite reviewing the available documentation and Community discussions, I have been unable to find any comprehensive training material covering the end-to-end S&OP process. I have found useful pieces of information here and there, along with several helpful Community discussions, but unfortunately no official training material covering the complete process. Could you please advise whether there is currently any:IFS Academy course (this is what I am primarily looking for, ideally a complete curriculum) eLearning content webinar recording implementation guide process-oriented training materialfocused specifically on Sales & Operations Planning (S&OP)? If no such training material currently exists, is there a formal process for requesting new Academy content or a learning curriculum for this topic? Thank you in advance for your help.Pavel K.
Does anybody know exactly why it is not allowed to change inventory part cost level (e g from cost per part to cost per serial) when there are parts in inventory? I thought the reason was that after the change there would need to be information per serial in Inventory Part Unit Cost. However, after some digging in the business logic, there is a method call to Inventory_Part_Cost_API. Handle_Part_Cost_Level_Change in Inventory_Part_API.Update__ that would take care of that if it was allowed to (I have tried it and it will generate the cost information per serial in inventory).So if we follow the timeline, business logic was written to take care of the change, then later on checks were added to prevent it.
Hi Everyone, for an implementation project at one of my customers, we have an USA site in scope.To support order delivery via Shipments we have to make use of SCAC codes, which are representing the service level of the transport company (like; FEDEX or UPS) This comes also with the configuration of Delivery Terms, Ship-Via Codes and Forwarders. Can someone share a best practice with me how to deal with this? Especially because i cant find any ‘dedicated’ field to support SCAC codes. Thank you. regards, Henk
I am trying to provide my users a way to create a customer order invoice directly from the customer order page instead of navigating to the Create Customer Invoices page first. Has anyone got such a solution in place already?We are running version 25R1.Thank you! Catherine
How to send incoming dispatch advice in shipment order
Hi all,I'm trying to better understand how IFS expects dependent demand to be handled in S&OP.We have Planned Dependent Demand calculating correctly at MS Level 1, and MS Supply reflects the resulting production requirements. However, S&OP appears to aggregate the MS Level 1 Forecast separately and does not appear to add Planned Dependent Demand to that forecast.This becomes confusing when MS Supply is copied into the New Operations Plan. The Operations Plan includes production requirements driven by dependent demand, but New Forecast doesn't include that same demand. The Inventory Plan then shows inventory building because Operations Plan is greater than Forecast.A few questions:Is Planned Dependent Demand intentionally excluded from the S&OP forecast? Is MS Supply intended to be copied into New Operations Plan when MS Supply includes dependent demand? If so, how is Inventory Plan expected to remain meaningful when Operations Plan contains dependent requirements that New F
I am looking to adjust the Weight Value for the parts that roll into Demand Forecast. I found the setting on Advanced Server Setting specifically called WeightValue. What exactly do I need to enter here to force use of a different weight. Currently the filed is blank and Demand Forecast is in LBs for weight. I searched for documentation and couldn’t find this specific info. Thanks
In IFS Cloud 26R1, the purchase authorization rules for purchase requisitions are based on the approval rules on the purchase requisition line.We want the rules to be based on the purchase requisition header level, so approval is driven by the total value of the requisition. Has anyone else run into this? How did you get around it?Any good reasons for justifying why this has been designed this way ? I notice we have some older posts for older versions of IFS for this same topic.
Is there a way to have demand planner round the qty numbers that are imported into forecast 0 similar to the way the site setting Qty Calc Rounding works at the site and part level?The parts loaded into MS1 have 16 digits to the right of the decimal point, but the site and parts are set to have a qty calc rounding set to 0.The data in the IPAP screen does not get rounded to 0 either. Please let me know.Thanks for your help.
A. What is your idea?1) ClassificationOpportunity for improvement2) Brief descriptionIn Demand Planning, users with Evaluator or Collaborative access can currently modify the Adjusted Forecast, My Adjusted Forecast, and Events even for the current or immediately upcoming periods.This can create an issue when production plans for these periods have already been fixed and can no longer be adjusted accordingly. For example, towards the end of the current period, a sales planner can still change the forecast for that same period, although production quantities have already been planned or produced based on the previously available forecast.This may lead to discrepancies between the forecast visible in Demand Planning and the forecast that was actually available when production decisions were made. It can also create uncertainty regarding which forecast values were valid at the relevant planning cut-off.We would therefore like to have a Frozen Period functionality directly in Demand Plannin
I have a part showing in transit and I do not know where to clear it from. I believe I know what Inventory location is stuck at (shows in transit in that location) I do not have any transport tasks for that part I don’t move the part inter-site. So I don’t show anything to receive from transit.
Hi,I have been trying to run automatic order processing with coordinator A (In coordinator group A with PO prefix defined as A) and to create a purchase order manually using a different coordinator (In coordinator group B with PO prefix defined as B). In both cases, I am getting the same PO prefix and there what I can see is, when we do the automatic order processing job, it does not consider the defined order prefix values for the coordinator groups? Is this correct ?Thanks and Best RegardsTharanga
We are running 25R2 SU5. We would like to implement a supplier approval to track who is approving the supplier.Any assitance would be greatly appreciated.
The full error message is “The customer order is not allowed to be released. Interim orders exist but are in the past or they exist but the capability check has failed. Please run the capability check again.” The case i’m looking is this:Create a customer order with a line that has a CTP planned part. Release this order. You will get a date in “Latest release date” column and also the “Capability check” column is checked. let time pass so that the current date is passed “Latest release date”. Credit-block the customer Reserve the material to the customer order line. The customer order should be blocked when you reserve the material. Go to “Blocked info” from the CO and try to release the order; you will get the error message and the customer-order will remain blocked.There is to me no known way to release the customer order from the credit-block; and the order is now stuck and cannot be delivered and invoiced.Has anyone hit this issue and know of a workaround? It seems like it should b
We are getting a lot of Handling Units in the application that are empty. Has anyone been able to clean these up somehow? It seems not be possible to delete these:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.