Service (Touch Apps, MWO, MRO)

1709 Topics

jolnseSidekick (Partner)

Posting control T1&T2 MSC2 and C55 issue

When the MSC2 and C55 posting control is tested i do not get the expected result.The C55 in my understanding should use the Resource - Maintenance information - DepartmentThe MSC2 in my understanding should use the Employee Maintenance information ie the HCM module Employee Assignment - position. The current behavior for C55 and MSC2 seems to be 100% the same. The Resource - Maintenance information - department field is used as field for the posting control.Please verify and explain why two different posting controls has been created and how to use the HCM Organisation position in the T1 and T2 setup. The most common setup is to use HR cost center in the T2 rule, as the home cost center will get the credit posting in a best practice setup.

3 hours ago

courtney.engelSidekick (Customer)

asked in Service (Touch Apps, MWO, MRO)

Maintenance Surveys (eForm) set up documentation help

We are utilizing IFS 10 and moving into Aurena. I am looking for the documentation about Maintenance Surveys to document how to set them up and their capabilities. I am also wondering if a survey can be attached to work task steps or task templates I did not see that as part of the workflow configuration yet. How do you allow a tech to save where they are if you are not utilizing MWO? Finally, can surveys be linked or utilize the measurements in IFS?

6 hours ago

Vernon AndersonSidekick (Employee)

asked in Service (Touch Apps, MWO, MRO)

In-Vehicle Driver Facing Cameras

I have been asked a question from a client and this may be for all you Fleet Management and HCM gurus! The customer wondered if we have the capabilities of getting GPS tracking functions and whether we have the facility or record drivers in the operation of their trucks.I know mWO has GPS functionality but has anyone ever encountered these requests outside of the use of mWO? There are devices that do both and can be integrated with other systems. Any input would be appreciated! Thanks!

10 hours ago

ctaylor56Hero (Partner)

asked in Service (Touch Apps, MWO, MRO)

Disable Prorating of Service Contract Invoicing

I have an example where I have a service contract with two service lines of type invoice plan. My Periodic invoicing is prior invoicing for the year. I.E. 7/1/2022 - 6/30/2023. My service line 1 has a valid from date from of 7/8/2022My Service Line 2 has a valid date from date of 7/15/2022 When I invoice these 2 lines for the first year IFS will prorate the invoice lines because they were not valid for the entire invoicing period. The IFS customer does not want these prorated and billed at full amount and the end date to be adjusted for a 1 year term based on the valid from date. So line 1 should generate for 7/8/2022 - 7/7/2023 and line 2 should generate for 7/15/2022 - 7/14/2023. Any ideas? I don’t think IFS will do this natively, wondering if anyone has some ideas?

12 hours ago

lopespetroHero (Customer)

asked in Service (Touch Apps, MWO, MRO)

Mobile - Still executing... Database Process is waiting for MWS.

Hi All.I’m facing this situation where it takes a long time to sync a single task to mobile user, about 30 40 minutes. The user need to initialize the app to receive the task. Using Apps10 UPD17, MWO Maintenance app Aurena. Sync Task [10565723] of User [FRSA] Device [27559] - Still executing... Database Process is waiting for MWS. Any ideia what might it be?

13 hours ago

lopespetroHero (Customer)

asked in Service (Touch Apps, MWO, MRO)

numeric or value error: character string buffer too small

Hi All.Does anyone know if there is a fix for this case?In APPS10 UPD17, using mobile Aurena apps MWO Maintenance, I’m getting this error as the user sign in eform.All of the other answers sync but the SIGNATURE no.My event is based on the SIGNATURE answer.This happens for a couple of users. I think maybe is the size of the signature that They do. ORA-20105: FndEventAction.EVENT_ACTION_ERROR: The Event Action "Execute Online SQL" on "C_MOBILE_NAO_CONFORM" has failed. Please contact your System Administrator to manage the Event Actions. ORA-06502: PL/SQL: numeric or value error: character string buffer too smallORA-06512: at "IFSPET.ERROR_SYS", line 140ORA-06512: at "IFSPET.ERROR_SYS", line 341ORA-06512: at "IFSPET.FND_EVENT_ACTION_API", line 2195ORA-06512: at "IFSPET.FND_EVENT_ACTION_API", line 2201ORA-06512: at "IFSPET.EVENT_SYS", line 200ORA-06512: at "IFSPET.EVENT_SYS", line 200ORA-06512: at "IFSPET.C_MOBILE_NAO_CONFORM_EVU", line 28ORA-04088: error during execution of trigger 'IFSP

14 hours ago

CurJulieNDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

Where to answer eform

Where is it possible to answer the eform? Would the output be in Survey Answers?

15 hours ago

CurJulieNDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

Maintenance survey answer output

How do you set up the maintenance survey answer output to construct a certificate?And how do you print this certificate?

15 hours ago

RusiiiruSidekick (Partner)

asked in Service (Touch Apps, MWO, MRO)

How to login to TAS as ifsapp when SSO Enabled

Hi Community, Is there any way to login to TAS Portal as ifsapp when SSO Enabled?

1 day ago

meshfemiSidekick (Customer)

asked in Service (Touch Apps, MWO, MRO)

Failed Transaction: Assignment Start/Work Start cannot be later than Assignment Finish/Work Finish.

Hi Community,Why will MMO triggered this kind pf failed Transactions even though the start work is not later than finish work as shown in the screenshot below? Thanks for your input. Mesh

4 days ago

BGunnDo Gooder (Customer)

asked in Service (Touch Apps, MWO, MRO)

Templates to create Service Requests in Cloud

In Apps 10, we are able to create new Service Requests from a Template. Cloud 23R2 doesn’t have this functionality. Is it in the pipeline for a future release or is there another way to achieve the same, thanks

4 days ago

mazmaryDo Gooder (Customer)

asked in Service (Touch Apps, MWO, MRO)

ORA-20105: Actual Start is later than todays date for work order 160808.

We are regularly getting this error - but I am struggling to find any dates out of sync. I have seen the previous conversation that indicates this was resolved. We are on Apps10 UPD21.Trying to tackle the failed transactions, but some are proving tricky. Any help would be great. Thanks

4 days ago

ArcChiedMDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

MWO Service Report

Hi all, Has anyone got any documentation of using Crystal Report to amend / customise the Service Report from MWO once a Work Assignment has been complete. I know that the document can be configured. I would just like some additional documentation as proof of concept. Thanks, Chiedza

5 days ago

Thilini KumarasingheSuperhero (Employee)

asked in Service (Touch Apps, MWO, MRO)

Aurena – Delimiter error when selecting an equipment object for document connection

Hi, Can anyone help with below queries ? User is trying to connect an equipment object to a document revision, whether object ID has period sign.Error raised and cannot connect the object.“Invalid use of data delimiter in object type EquipmentObject.If one of the values contains a period, you can use a comma, semicolon, or colon as a delimiter instead.” Question 1: Is there any specific reason as to why period sign needs to be avoided ? Question 2: Then as a workaround, if you connect the object using objects tab in the document revision form, object description is not displayed until you save the record. (However the object can be connected without getting the delimiter error).Is this something that should be corrected, so that user can see the description, before saving the record ? Test Flow:Open Document revision form. Query for a document. Click connect objects. Select object Equipment Functional or Equipment Object. Under Key ref. field search for the object ID.DOK.TEST (Object

5 days ago

lagnlkDo Gooder (Employee)

posted in Service (Touch Apps, MWO, MRO)

Enhancement idea to improve the functionality of Miscellaneous allocations in MWO

The current process to update an approved Miscellaneous allocation for a technician solely using MWO seems to be not available with the existing functionality. Manual interaction with Backoffice personnel is required to do any changes for the approved miscellaneous allocations in MWO. There are some customer requirements where they need MWO users to have the facility to do some alterations for the approved miscellaneous allocations from MWO application itself rather than going for the IFS Cloud platform. The current design where allocations are effectively “locked” down with approval functionality, could be enhanced to a more flexible and useful solution. Given below with some suggestions for the improvement of the functionality as per some opinions of the users.1. Approval demand configurable: Whether approval is required could be introduced as a controlling parameter on the Category and be viewed in conjunction with Absence/No Absence.2. If approval is not required, the Technician sh

6 days ago

chayma.lajnefDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

I can't find my functional objects in the MWO Application

HelloHow can I display the functional/serial objects in the MWO application? Is there a specific setting for this

7 days ago

ayagmurDo Gooder (Customer)

asked in Service (Touch Apps, MWO, MRO)

ORA-20124: Error.NULLVALUE: Field [LU] is mandatory for Basic Data Translation and requires a value

Hi, as it is shown even though there are no null value, it throws the error. What is the problem? Anyone have experienced that before? BR

8 days ago

SanjayaDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

How to request "Register the Mobile App" from "mobile app development team" - NotifyMe

Hi,The documentation on NotifyMe App, describes a step to “Register the Mobile App”.Is there a document explaining the process? [IFS Cloud - 23R1 UPD 6] My Status:I have created the Azure Notification Hub. And the notifications are received to the Notification Hub.Which means the Notifications are sent from IFS Cloud successfully to the notification hub. i.e. Application parameters in IFS Cloud are correctly defined. The Notification Hub metrics shows that the requests have failed. Understandably this is due to not setting up the Google and Apple settings which requires keys from the development team.Thank you,Sanjaya

11 days ago

CurJulieNDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

IFS Cloud Survey on an object

Is it possible to connect a survey to either a serial object or a service object? If so, could someone show how?

11 days ago

OmnLorreZDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

Unable to sync MWO due to Mobile Integration error

We had a link set up to another application from the Mobile Integration page in Apps for Page Designer section but when we go to this page, it throws an error message. Nothing displays in the Mobile Integrations list. An internal server error occurred. Contact administrator. Url: https://ifscloud.omnibyte.com/main/ifsapplications/projection/v1/ServiceEngApp.svc/HomeIntegrationsSet?$orderby=DisplayOrder&$select=Name,Description,Site,Id,TaskSeq,ExecutionInstanceSeq,DisplayOrder,Screen,FeatureType,MchCode,MchContract,MchName,MchLoc,MchPos,EquipmentMainPosition,GroupId,MchType,SupMchCode,ObjLevel,SerialNo,Type,PartNo,Criticality,ItemClassId,LocationId,ObjectInfo,RoomPosition,CustomerIdentity,ObjTypeDesc,AddressId,AddressInfoId,Address1,Address2,Address3,Address4,Address5,Address6,CustomerNo,LocationName,City,Country,County,State,ZipCode,CountryCode,ZipCity,Contact,EMail,PhoneNo,WoNo,OrganizationSite,OrganizationId,PriorityId,WorkType,TaskDescription,LongDescription,ReportedBy,A

11 days ago

SrikanthSuperhero (Partner)

asked in Service (Touch Apps, MWO, MRO)

IFS TAS installation prerequisite

We’re trying to configure TAS server for Apps 10 using IFS Technical Documentation and stuck on this step:We started going through the prerequisites and got to this step to load the software. It shows there is nothing to install. According to Microsoft, they’ve made this software end of life and there was an online “feed” of products the software would pull from Microsoft but that service has been shutdown.How can we get access to the prerequisite Web Deploy software now?

13 days ago

qzliuDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

MWO no equipment object

In MWO, there is no equipment object basic datathere are relevant configuration page in ifs10, which page corresponds to ifs cloud？I set a filter, but it didn't workIn other words, what are the correct configuration stepsthanks！

13 days ago

corlundaDo Gooder (Customer)

posted in Service (Touch Apps, MWO, MRO)

Manage Page Configurations per page in ServiceEngAPP and MaintEngAPP

Today, almost all of the Page Configurations for the ServiceEngAPP and MaintEngAPP are handled in one page/Client Model and needs to be redone after each Service Update (and Release). To make it more manageable and to simplify the rebase and installation of configurations, each page in the APP should be handled as a separate page/client model in Page Configurations. I.e. the just as the Cloud-pages are handled today. Applies to release up to and including 23R2.

14 days ago

DIPAKPATELSidekick (Customer)

asked in Service (Touch Apps, MWO, MRO)

NotifyMe - Refresh markdowns - NotifyMe - Register notifications

Hello all, Yesterday we had IFS Apps 10 update 7 deployed in our live system, after that we can see many background jobs for below description. NotifyMe - Refresh markdowns. - API name → Supplier_Inv_Notification_API.Refresh_Markdowns NotifyMe - Register notifications. - API name → Supplier_Inv_Notification_API.Register_Notifications I know it’s related to manual supplier invoices. Does any one know how to control these new background job? Is there any configuration for this? Can anyone explain this? Thank you.

15 days ago

CooErikaSDo Gooder (Partner)

asked in Service (Touch Apps, MWO, MRO)

Connect Work Order to the Project via Technician Portal or MWO

Hi,My customer is using IFS Cloud and has a scenario where engineer will be raising WOs via technician portal or MWO for the specific project activity. As standard, I can’t see a way to connect newly raised job to the project using portal/MWO, only directly on the Prepare Work Order screen. On another topic there was mentioning of possible configurations can be done, but no details have been provided. Can anyone assist? In addition, there will be a lot of PMs used on the project, however as standard functionality PM Actions cannot be attached to the project activity at the generation point. Is there a way to connect PMs to Project using Technician Portal or MWO?Thank you

18 days ago

Page 1 / 69

Service (Touch Apps, MWO, MRO)

Badges

Sign up

Login to the community

Scanning file for viruses.

This file cannot be downloaded