IFS Cloud for Aviation Maintenance

Hi,Does anyone know whether it’s possible to use any created cloud user as the Keycloak Super Admin? For example, currently it is advised to set the user as “ifsadmin” via the ifscloud-values yaml file, could I potentially create a user in Cloud first like “ReportAdmin” and use that as the admin?It appears even if you assign a user the Administrator or Super user roles within Jaspersoft, it still does not give them the full permissions (like the ‘Manage' menu) to upload & manage reports. Only the keycloak super user admin seems to have those permissions. Referring to the cloud-values paramters here in 24R1 & R2: https://docs.ifs.com/techdocs/24r2/070_remote_deploy/010_installing_fresh_system/200_installing_ifs_cloud/035_ifs_cloud_ifsinstaller/030_installation_parameters/#parameters_for_ifsmaintenixreportserverThanks.

When new deliverables is available for download, e.g. a new release, or being distributed we would like to be able to confirm that the files have not been compromised, altered or tampered, with(preferably) a digital signature* of the software files or binarys, or a checksum control of the software files or binarys.*This digital signature validates the identity of the software author or publisher and verifies that the file has not been altered or tampered with since it was signed. Is this applicable in the way described above ?  

I have created DSO> Proved with repair order.         Go to the relevant assembly shop order and observe the part is in customer owned status. Supply type MRO.  Now  this repaired part need to another engine. Now if I disconnected from the current engine that can be pegged to another engine.  on the assembly shop order, now that we have disconnected the repair order we have the material line (customer owned) that has no part reserved or in repair so we need to run MRP ... please consider to include this in a future release.

  Hello,How does a user edit / make adjustments to the “Layout Name” field below in the page “Airworthiness Regulation Codes per Form Type ?Some of the changes we need to make in the following part certificate 8130-3 printout include:- removing the extra comma (,)- changing the country from United States to other values- adding company logo for potential clients  

In my IFS Cloud lists and report outputs, all rows currently appear with a plain white background, which makes it difficult to visually separate the data.I would like to apply alternating row colors — one white, one light gray (zebra style) — to improve readability.Is there a way to configure this in IFS Cloud, either through report layout design or list view settings?

We are implementing IFS Cloud in a CAMRO Customer.For Quality Control it was setup as Mandatory Manufacturing Control Plan for several parts. This requires setup for each Inventory Part and Routing Type a specific Control Plan.Should we have any way to identify which Inventory Part / Routing Type has a mandatory control plan?

Hello,I would like to know if it is possible to create a report for the repair code routing.The view “REPAIR_CODE_ROUT_OPERATION” is basically the report I need; however, unfortunately, the included information does not appear as “included” or “not included”.Could you please advise if this information can be added or if there is another view/report available that contains this detail?Thank you.  

In my IFS Cloud lists and reports, all rows currently appear with a plain white background. This makes it difficult to visually separate the data.I would like to apply alternating row colors — one white, one light gray (zebra style) — to improve readability.Is there a way to enable this kind of row styling in IFS Cloud, either through report design or list configuration settings?

Using IFS Cloud, how can I configure a modification to meet an airworthiness directive requirement with the following conditions:1. For Pre P&WC SB No. A63069 configuration engines installed on aircraft withmore than 100 hours of total air time since new:Within 25 hours of air time from the effective date of this AD.2. For Pre P&WC SB No. A63069 configuration engines installed on aircraft with100 or less hours of total air time since new:Within 150 hours of air time since new.3. For Post P&WC SB No. A63069 engines installed on aircraft that hasaccumulated 75 or less hours of air time since SB incorporation:Within 100 hours of air time since SB A63069 incorporation.4. For Post P&WC SB No. A63069 engines installed on aircraft that hasaccumulated more than 75 hours of air time since SB incorporation:Within 25 hours of air time from the effective date of this AD.

Is it possible to get a part certificate report in the technicians portal if you do not use aviation? I know we have the survey workflow but I want the survey to be on an object like in the aviation part certificate report.

Scenario:Consider an open Shop Order with one or more outside operation lines. One item on the shop order has to be sent to an external supplier for repair before being returned to us to complete the remaining work on the Shop Order. A purchase order is created for the outside operation item and the Ship WIP to Supplier is executed. The status of the operation line is now ‘In Process’ and the item is ready to be physically sent to the supplier (an external third party company).  What is the next recommended step, or what functionality exists in IFS Cloud to get the freight portion of this process ready? For example, can a Shipment be generated from the Shop Order or Purchase Order?  Or how do I get the part from the Outside Operation added to an existing shipment?