Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

This will include the questions related to Foundation1 and Technology, Infrastructure, Cloud, Integration, Developer Tools, Data and IOT, and Platform.

  • 6,976 Topics
  • 21,831 Replies

6976 Topics

B
Sidekick (Employee)
bartlomiej.pobochaSidekick (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

How to replace EDI messages from IFS8 in IFS Cloud?

Hello,Do you think the following approach will be effective in replacing EDI messages from IFS8 in IFS Cloud?For outbound EDI messages from IFS8, convert JSON to XML using a transformer (perhaps the standard one IFS_JSON_TO_XML_GENERIC?) and apply customized transformers to map fields from EDI messages to IFS Cloud projection fields.The same logic for inbound, but in a different direction and with the assumption that BizAPIs that were used are no longer available in the Cloud.If yes then mappings between EDI and Cloud projection for different types of messages are required, do you have something like that?Or perhaps you have any other ideas to fulfill the requirements?Best regardsBart

1
dsj
Superhero (Partner)
4 months ago
L
Do Gooder
LeS1Do Gooder
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

SqlPlus pod is not connected by public IP

Sqlplus pod is created successfully but not able open interactive terminal inside Command :  kubectl exec -it -n ifs-ingress sqlplus -- bashError from server: error dialing backend: dial tcp <Public IP>:10250: i/o timeout  

0
L
Do Gooder
1 year ago
adL
Do Gooder (Customer)
adLDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS 10 - Service Failure

Hi experts,Every 1 hour we get service error 503 and our work is interrupted.When it gives an error, it creates many files in the IFS folder as in the screenshot. We can't find out where or what is causing the error. We are waiting for your assistance. Ifs.Fnd.FndSystemException: Unexpected error while calling server method AccessPlsql/Invoke ---> Ifs.Fnd.FndSystemException: Error occurred while calling r:48080/main/default/plsqlgateway/AccessPlsql/Invoke?tbwOverviewCustOrdLine. Please contact your system administrator.Error 503 - Service UnavailableServer stack trace:    konum: Ifs.Fnd.AccessProvider.FndConnection.CallGetResponse(String intface, String operation, FndRequestContext requestContext, FndManualDecisionCollection decisions, Byte[] requestHeaderBytes, Byte[] requestBodyBytes, FndApfAsyncInvoke asyncInvokeHandle, Boolean integrationGateway)   konum: Ifs.Fnd.AccessProvider.FndConnection.AsyncGetResponse(String intface, String operation, FndRequestContext requestContext, Fnd

2
adL
Do Gooder (Customer)
6 months ago
Maja Stanislawska
Sidekick (Customer)
Maja StanislawskaSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Refreshing Dictionary Cache does not succeed (no error)

Hi,we have an “alarming” red color for the Refresh Dictionary Cache. The user who is normally uploading permission sets has among others FND_ADMIN permissions, so we thought this should be enough to successfully refresh the dictionary cache. However, the user cannot succeed with that - the color does not change successfully. There is also no error message. No UI feedback.Do we have someone here who could help? IFS Support is silent so far.The user wrote:I have tried going through all the permission sets and refreshing the dictionary cache as instructed by IFS, and I have also tried to refresh it via Refresh Server Cache. Nevertheless, it is still marked as red and remains unrefreshed. How do I solve this? This is a problem in non-prod and prod environments. It behaves the same for all permission sets.

6
M
Hero (Customer)
1 year ago
B
Do Gooder (Customer)
bgkprathibhaDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

View list of users who has access to a particular screen IFS10

Hi,Is there a way to view a list of users who has access to a particular screen? Ex: Code Part Values ScreenThank you.

2
B
Do Gooder (Customer)
11 months ago
N
Do Gooder (Customer)
nkiphuthDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Shop Floor Workbench - Start Production(Team)

Doing an MES integration. Looking through the API explorer, I cannot find an API that will allow us to start run time/ set up time as a team. We find plenty of start Machine Clockings, or labor clockings. I can only find start team using the virtual assistant. Surely there’s a way to start it with one API call. Current setupis as follows. We insert a record into the virtual table:POST - ...projection/v1/StartClockingsAssistantHandling.svc/StartClockingsSet    {     "TimeType":"{{TimeType}}",      "SelectedOperations":"OPERATION_NO={{operationNo}}^ORDER_NO={{orderNo}}^RELEASE_NO=   {{releaseNo}}^SEQUENCE_NO={{sequenceNo}}^",      "CurrentTeamId":"{{teamID}}"      } Then we get objkey from above:GET - /Reference_StartClockingsVirtual Next we start the clocking with the objkey:POST - StartClockingsSet(Objkey={{startObjkey}})/IfsApp.StartClockingsAssistantHandling.StartClockingsVirtual_StartClockings Then we clean up the virtual table:DEL - /StartClockingsSet(Objkey={{startObjkey}})

3
N
Do Gooder (Customer)
2 months ago
M
Hero (Partner)
michelHero (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Can IFS provide some document about ifs softwaretesting pressure

Hi  where I can find some document about ifs softwaretesting pressure？ BRMichel

4
S
Superhero (Customer)
1 year ago
W
Do Gooder (Employee)
wiwrplDo Gooder (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

A list of values in Aurena with a dynamically (e.g. through a variable) indicated view

Hello, Is it possible to create a list of values in Aurena (IFS Cloud) in which the selection of the view used is not explicit but retrieved with the function ?In enterprise explorer app10 and the cs file is like this: private void dfsValidateKeyRef_OnPM_DataItemLov(object sender, WindowActionsEventArgs e)...                DbPLSQLBlock(@"BEGIN                                {BaseViewName} := &AO.C_Data_Access_Rule_API.Get_Base_View_Name({ViewName} IN);                               END;", namedBindVariables);                     this.dfsValidateKeyRef.RuntimeLovReference = sBaseViewName;… The question is how to implement such functionality in Aurena (and whether it can be done).Lists of values in Aurena that I found use explicit view specification, e.g.: query CViewNameRefLov {   from = "C_DAR_VIEW_LOV"; // not possible (error):  from = ViewNameVariable;    lu = none;   where = "LU_NAME is not NULL";   keys = LuName, ViewName; There is also the “lovswitch” instruction, which gives

0
W
Do Gooder (Employee)
1 year ago
S
Sidekick
SANJSidekick
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Place Text File to SFTP location using IFS Connect

Hi Team,We have requirement to create text file in the SFTP location from IFS, so we have configured corresponding sftp sender through IFS Connect.Now, can we directly post Application message with message body as text file or only option is to create xml record type and use xml to text transformer in routing address before routing file to sftp location?If latter is the only option, whether will it have performance impact if we need to fetch thousands of records in xml file and convert to text file using xsl transformer before placing the file? Thanks,Sanjay

0
S
Sidekick
1 year ago
S
Do Gooder (Customer)
seidfDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS Update Analyzer - TLS 1.0

We are currently in the process of beginning our migration to the IFS environment and as apart of that, we would like to use IFS Update Anlayzer.However the application (the most recent, 10.020) crashes immediately upon launch.After investigating we found that it is because it requires TLS1.0 to be enabled, which for security reasons we have disabled across our environment.Not only is TLS 1.0 end of life, it will be disabled by default on Windows by the end of the year.Is there an configuration option to allow it to use TLS 1.2+ or an upcoming update that will rememdy this?

5
B
Do Gooder (Customer)
2 months ago
SaraCrank
Sidekick (Customer)
SaraCrankSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Custom Integration Projection and API's

Hello!We are working on some integration with Boomi and have run into a roadblock with a custom integration projection. We were under the impression that when you add two Entities to a custom projection that it would combine the data from those two entities into a single API. We need to pull the full address and the address type, unfortunately that information is in two different places. Here’s our Custom Projections - the Categories has disappeared, it was Integration, not sure why it’s not showing. We have out two entities, CustomerInfoAddress, CustomerInfoAddressType and we’ve done our Associations and Key Mappings.  It’s published and when we go to API Explorer and look at the API Doc, we have API’s for each entitiy but not them combined. Neither one of these have all the information we need. Are we misunderstanding how the custom projections work or is there something wrong with how the API’s are being generated. I did a case to IFS asking this exact question and they told me to c

1
Guzik
Do Gooder (Customer)
5 months ago
E
Sidekick
ertan.ariSidekick
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Database Process is not working

Hello,Our database processes are not working. Why does it originate? How can we solve this problem?  

1
Kasun Balasooriya
Superhero (Employee)
9 months ago
K
Do Gooder (Partner)
kavita.aroraDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

File integrations

The customer would drop all attachments in a SFTP folder in binary format, from where the files are to be picked up and then checked into document management (which is configured to be in the database).  Request for possible best methodology to do this integration. Are there any endpoints available in Apps10 version of application which can be exposed to customer where binary file can be send in?

2
K
Do Gooder (Partner)
1 year ago
Peter Sketch Boomi
Hero (Partner)
Peter Sketch BoomiHero (Partner)
posted in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

IFS Cloud & Apps 10 to Salesforce CRM "Lead to Cash" video

Hi EveryoneA common area of integration we get asked about with Boomi and IFS is linkage to SFDC CRM.  For anyone interested, I’ve posted a short video to the IFS page on our website here  to show an example of this type of integration in action.Any questions of course, please let us know.Peter 

0
Peter Sketch Boomi
Hero (Partner)
2 years ago
M
Sidekick (Customer)
mlcscottonnSidekick (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Lobby Data Source using table alias

I have created an lobby element which shows me which sub contract valuations are certified but not paid. The issue I am having is it will not allow me to add an alias on the view and I am 99% sure you was able to do this.For example, here is my definition and I want to add the alias ‘a’ so it knows in my select statement to use the sub_con_no and valuation_no from the subval_invoice_details view.I am using ifs apps 10, update 15. Thank you

3
M
Sidekick (Customer)
1 year ago
D
Do Gooder (Partner)
DalKylekYDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

developer studio error when deploy

it has a error when We use developer studio to deploy client file .and AURENA page is missing. 

1
S
Hero (Employee)
2 years ago
H
Do Gooder (Customer)
hercellisDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Consolidated Screening List

I need to be able to use this API for the Consolidated screening list here https://api.trade.gov/apps/store/apis/info?name=ConsolidatedScreeningListAPI&version=v1#tab2.  Does anyone know of way to do this in IFSAPPS9?  It uses Bearer Authentications so uses Access tokens in the API request. Bascially what I want to do is at time of customer order entry, check to see if the customer is on the list and log that in order line history and give the user a message if it is on the list.

5
S
Hero
2 years ago
S
Hero (Customer)
SHAUN_KERSLAKEHero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

UI Designer Access

Hi,We are using IFS Apps 8 with MWO.Can someone guide me to the access required with permission sets to allow the UI Designer to be enabled and allow the user to make adjustments to the layout?Thanks in advanceShaun

1
Thushitha Chandrasiri
Superhero (Partner)
2 years ago
J
Sidekick (Partner)
jporterSidekick (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

How to refresh cache in Apps7.5

A long time ago, in an application far, far away, the rebel alliance was using Apps7.5 and forgot how to refresh cache.Help me IFS Community, you’re my only hope ;-)

3
J
Sidekick (Partner)
1 year ago
O
Do Gooder (Partner)
OrlSantoshSDo Gooder (Partner)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Access token

How to get the access token for IFS 21R2 cloud, basically how to access the IFS admin console?

2
O
Do Gooder (Partner)
2 years ago
E
Do Gooder (Customer)
esteban4413Do Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Users intermittent disconnect after applying July WebLogic updates

We applied the July WebLogic corrections to eliminate the critical vulnerability and after that install we have multiple users being disconnected from the application server throughout the day. They receive a message saying that there is a problem connecting to the application server and that the user is not allowed access. It also says that the most likely causes are user is not set to active or user is not granted connect privileges. Has anyone experienced this issue?

1
Sampath Sitinamaluwa
Hero (Employee)
3 years ago
ADNAN
Sidekick
ADNANSidekick
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Change Password Message Text Edit

 Hello;  I want to change the password warning message. Could you help?  

3
ADNAN
Sidekick
3 years ago
durette
Superhero (Customer)
duretteSuperhero (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

How are SaM multi-choice fields implemented?

We have the old IFS Sales and Marketing (Vendimo) with the VMO_ object names. I’m developing a migration script to move some custom fields to Embedded CRM. How would I query to find multi-choice field values?

1
durette
Superhero (Customer)
3 years ago
ZIGESAMM
Do Gooder (Customer)
ZIGESAMMDo Gooder (Customer)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Aurena Page Designer Action Command Parameter newline in data

Hello,is there a way to put newline character into the parameter Data of an Custom Action joined to the projection?how to rplace ‘\r\n’ ?What is the syntax for the ParameterMappings line to get a Parameter with newline characters?in the example the parameter Event_Data_ should get the string “!Test\r\nRESULT=${PART_NO}”. 

1
Navinth Bakmeedeniya
Hero (Employee)
1 year ago
D
Do Gooder (Employee)
Devindya SathsaraniDo Gooder (Employee)
asked in Framework & Experience (Infrastructure, Cloud, Integration, Dev Tools)

Number/ Date format on report dialogue

Hi Team,What setting distinguish formats between en-US and en-GB ? 

1
Mathias Dahl
Superhero (Employee)
2 years ago

Badges

Show all badges
Terms & ConditionsCookie settings